Palworld
This combination provides smooth gameplay with an average of 68 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 32 | 41 | 51 |
| 1440p QHD | 43 | 57 | 74 | 92 |
| 1080p Full HD | 66 | 87 | 113 | 139 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with Intel Core Ultra 9 290K Plus + AMD Radeon RX 6600, In-Depth Analysis
Palworld’s measured performance with the Intel Core Ultra 9 290K Plus and AMD Radeon RX 6600 shows a clear pattern: this combination is firmly geared toward 1080p and 1440p play, with 4K only viable at lower presets. The data indicates that the RX 6600’s 8 GB VRAM and 128-bit bus are the primary constraints, while the 24-core CPU provides ample headroom. Benchmark results show this pairing sits in the 77.7th percentile (rank 2288 out of 2944 combos) for this game, placing it in the upper-mid tier overall, but the FPS deltas between presets reveal that graphics settings matter far more than CPU choice here.
Settings Recommendations
The measured FPS rows point decisively to Medium as the best experience-per-frame preset across all resolutions. At 1080p, Medium delivers 113 FPS average with a minimum of 96 FPS, which is a 30% improvement over High (87 FPS) while retaining visual fidelity above Low. The 96 FPS minimum is the key number — it keeps frame pacing smooth even in busy Palworld bases with many Pals active, something the High preset’s 87 FPS average cannot guarantee. At 1440p, Medium hits 74 FPS average with a 63 FPS minimum, which is still comfortably playable on standard 60 Hz monitors, while High drops to 57 FPS average with no recorded minimum — a sign that the GPU is starting to struggle. For 4K, Medium produces 41 FPS average (35 minimum), which is marginal but playable if you cap the frame rate; High at 32 FPS average is below the 30 FPS floor for most players, and Ultra at 24 FPS is effectively a slideshow.
The Ultra preset is the outlier. At 1080p, Ultra yields 66 FPS average — a 42% drop from Medium’s 113 FPS. That gap confirms that the RX 6600’s 8 GB VRAM is being saturated by Ultra textures and effects, not the CPU. The Core Ultra 9 290K Plus can push far higher frame rates, as evidenced by Low presets reaching 139 FPS at 1080p and 92 FPS at 1440p. The recommendation hierarchy is clear: Medium at 1080p for competitive or high-refresh play (113 FPS), Medium at 1440p for balanced quality (74 FPS), and Low at 4K (51 FPS) if you must use 4K, since Low beats Medium’s 41 FPS by 24% and stays above 50 FPS. High is a reasonable compromise at 1440p (57 FPS) but not at 4K, where the 32 FPS average fails the playability test. The data does not support Ultra under any resolution for this GPU — even at 1080p, the 66 FPS average is barely above the 60 FPS threshold and will dip further in dense scenes.
GPU Role
The AMD Radeon RX 6600, built on RDNA 2.0 with a Navi 23 chip, is the decisive component in this pairing. Its 8 GB GDDR6 memory on a 128-bit bus provides 224.0 GB/s bandwidth — enough for 1080p Medium, but the 4K Ultra result (24 FPS) shows what happens when capacity runs out. The GPU’s boost clock is 2491 MHz with a game clock of 2044 MHz, which are respectable figures for its class, but the 1792 shading units and 64 ROPs limit fill-rate-heavy scenes. The data shows a consistent pattern: dropping from High to Medium at any resolution yields a 30-35% FPS improvement, while dropping from Medium to Low yields another 23-28% gain. That scaling is characteristic of a GPU that is bandwidth-limited, not compute-limited.
The RX 6600’s 8 GB VRAM is the single most important spec for Palworld. At 1080p, Ultra (66 FPS) vs. High (87 FPS) shows a 24% penalty for Ultra textures — a classic VRAM capacity cliff. At 1440p, the Ultra preset (43 FPS) falls 42% below Medium (74 FPS), and at 4K, Ultra (24 FPS) is 41% below Low (51 FPS). The gap between Medium and Low at 4K (41 vs. 51 FPS, a 24% difference) suggests that even Medium’s texture streaming exceeds the 8 GB buffer at that resolution. The GPU’s 63rd percentile ranking among all GPUs and its 19036 average benchmark score put it in the midrange, and its nearest rivals — the NVIDIA Quadro K6000 (19030, 0% delta), RTX 4050 Mobile (19049, -0.1%), and Tesla K20m (19089, -0.3%) — are all comparable in raw compute but lack the RX 6600’s modern feature set. For Palworld, which is an early-access title with known optimization issues, the RX 6600’s RDNA 2.0 architecture with DirectX 12 Ultimate support (12_2) is adequate, but the 128-bit memory bus will always cap performance in high-resolution scenarios. The CPU is not the bottleneck in any measured configuration — the FPS differences between presets at a fixed resolution are entirely attributable to GPU load.
How This Combo Ranks
This combination of Intel Core Ultra 9 290K Plus and AMD Radeon RX 6600 ranks 2288 out of 2944 tested combos for Palworld. That places it in the 77.7th percentile — above average, but not a top-tier pairing for this specific game. The rank reflects the GPU’s midrange position: the CPU is a top-4% processor (96th percentile among all CPUs), while the GPU sits at the 63rd percentile. The 24-core CPU with a 5.80 GHz boost clock and 36 MB L3 cache is overkill for Palworld’s engine, which likely uses only a handful of threads. The CPU’s nearest rivals — the Intel Core Ultra 9 285K (0.2% higher avg score), AMD EPYC 4584PX (1.1% higher), and AMD EPYC 9135 (1.2% higher) — are all within a 1.2% margin, meaning the CPU is not differentiating performance here.
The combo rank’s position at 2288/2944 (78th percentile) is actually proof of the RX 6600’s efficiency, because many combos with weaker CPUs but stronger GPUs will rank higher. The data shows that Palworld is GPU-bound in virtually every scenario: the FPS scales linearly with preset quality, not with CPU capability. If this combo had a stronger GPU, the rank would jump significantly, as the Core Ultra 9 290K Plus has ample headroom — its Cinebench R23 multi-core score of 51731 and PassMark multithread score of 60860 indicate massive compute reserves. The 24 threads with 24 cores (no hyperthreading) are more than sufficient for Palworld’s survival mechanics, which involve physics calculations for Pals, base building, and world streaming. The ranking suggests that users seeking better Palworld performance should prioritize GPU upgrades over CPU upgrades, as the current GPU is the limiting factor in 8 of 12 measured configurations (all except 1080p Low and 1440p Low, where FPS exceeds 90).
Measured FPS Breakdown
1080p Resolution: The full preset ladder is available. Low delivers 139 FPS average, Medium 113 FPS (min 96, max 130), High 87 FPS, and Ultra 66 FPS. The step-down from Low to Medium costs 26 FPS (19% reduction), but the visual gain is substantial. High to Ultra costs 21 FPS (24% reduction) — the steepest penalty, again pointing to VRAM limits. The Medium preset’s 96 FPS minimum is the most important number for 1080p gaming, as it ensures no drops below 60 FPS even in combat with multiple Pals.
1440p Resolution: Low delivers 92 FPS, Medium 74 FPS (min 63, max 85), High 57 FPS, and Ultra 43 FPS. The Medium preset’s 63 FPS minimum is just above the 60 FPS threshold, making it the safest choice for 1440p. High at 57 FPS average will experience dips below 50 FPS in intense scenes. Ultra at 43 FPS is playable for single-player but risky for fast-paced combat. The scaling from 1080p to 1440p at Medium is a 34% FPS drop (113 to 74), which is less than the pixel count increase (78% more pixels) — indicating the GPU is not purely fill-rate limited at this setting.
4K Resolution: Low delivers 51 FPS, Medium 41 FPS (min 35, max 47), High 32 FPS, and Ultra 24 FPS. Only Low (51 FPS) and Medium (41 FPS) are remotely playable. The Medium preset’s 35 FPS minimum will be noticeable during large-scale base raids. High at 32 FPS average is below the 30 FPS floor for many players, and Ultra at 24 FPS is unplayable. The 4K data reveals that this combo is not designed for 4K gaming — even Low settings only achieve 51 FPS, which is 37% below the 1080p Low result (139 FPS). The 8 GB VRAM is the clear culprit, as the 4K texture sets exceed capacity, causing the GPU to swap to system memory.
Preset Scaling: Across all resolutions, Medium provides the best balance of FPS and visual quality. At 1080p, Medium is 73% of Low’s FPS but offers significantly better textures. At 1440p, Medium is 80% of Low’s FPS. At 4K, Medium is 80% of Low’s FPS. The consistency of this ratio (73-80%) suggests the RX 6600 handles Medium settings efficiently regardless of resolution, while High and Ultra presets trigger disproportionate penalties (24-42% drops) due to VRAM pressure.
Resolution Scaling
The FPS degradation from 1080p to 4K follows a steep curve that identifies the GPU as the bottleneck. At Medium settings, the progression is 113 FPS (1080p) → 74 FPS (1440p) → 41 FPS (4K). That is a 35% drop from 1080p to 1440p, then a 45% drop from 1440p to 4K. The pixel count increases by 78% (1080p to 1440p) and 125% (1440p to 4K), so the FPS drops are proportionally less severe than the pixel increases. This would normally suggest CPU limitations, but the CPU is far more powerful than the GPU. Instead, the data indicates that the RX 6600’s memory bandwidth (224.0 GB/s) is the limiting factor — as resolution increases, the GPU must fetch more texture data per frame, and the 128-bit bus cannot keep up.
At High settings, the scaling is 87 FPS (1080p) → 57 FPS (1440p) → 32 FPS (4K). The 4K result is 63% lower than 1080p, a much steeper drop than the Medium preset’s 64% drop. This suggests that High settings at 4K are pushing the 8 GB VRAM to its absolute limit, causing memory thrashing. At Low settings, the scaling is 139 FPS (1080p) → 92 FPS (1440p) → 51 FPS (4K). The 4K Low result is 63% lower than 1080p Low, but the absolute FPS (51) is still playable. The fact that Low settings at 4K outperform Ultra at 1080p (51 vs. 66 FPS) — despite a 4x pixel increase — proves that VRAM capacity, not raw shading power, is the overriding constraint.
The resolution scaling data also reveals that the CPU is never the limiting factor. The Core Ultra 9 290K Plus’s single-thread performance (Cinebench R23 single-core score of 7303, PassMark single-thread score of 4823) is more than sufficient to feed the RX 6600’s frame output at any resolution. If the CPU were the bottleneck, we would see FPS plateau at 1080p regardless of settings. Instead, 1080p Low (139 FPS) vs. 1080p Ultra (66 FPS) shows a 2.1x range, confirming GPU-bound operation. For users with 1440p monitors, the Medium preset (74 FPS) offers the best resolution-to-FPS ratio, while 4K users should stick to Low (51 FPS) and accept the visual trade-off.
FAQ
Q: What is the best preset for 1080p gaming with this combo?
A: Medium is the clear winner at 1080p, delivering 113 FPS average with a 96 FPS minimum. High (87 FPS) and Ultra (66 FPS) are both playable but sacrifice 23% and 42% of Medium’s frame rate respectively, with diminishing visual returns.
Q: Can this combo handle 4K Palworld?
A: Only at Low settings, which achieves 51 FPS average. Medium (41 FPS) is borderline, while High (32 FPS) and Ultra (24 FPS) are below playable thresholds. The 8 GB VRAM is insufficient for 4K Ultra textures.
Q: Is the Intel Core Ultra 9 290K Plus or the AMD Radeon RX 6600 the bottleneck?
A: The RX 6600 is the bottleneck in all measured configurations. The CPU’s 96th percentile ranking and 51731 Cinebench R23 multi-core score vastly exceed what Palworld requires, while the GPU’s 63rd percentile ranking aligns with the observed FPS limits.
Q: How does this combo rank against other tested hardware for Palworld?
A: It ranks 2288 out of 2944 combos (77.7th percentile). This is above average but not top-tier, reflecting the GPU’s midrange position. The CPU’s nearest rivals (Core Ultra 9 285K, EPYC 4584PX) show less than 1.2% score differences, meaning the CPU choice has minimal impact on Palworld performance.
Q: Why does the Ultra preset perform so much worse than Medium?
A: The Ultra preset at 1080p (66 FPS) is 42% slower than Medium (113 FPS). This steep drop is caused by the RX 6600’s 8 GB VRAM being exhausted by Ultra textures and effects, forcing the GPU to use slower system memory. The 128-bit memory bus (224.0 GB/s) cannot compensate.
Q: Is this combo better for 1080p or 1440p gaming?
A: 1080p is the sweet spot, with Medium (113 FPS) and even High (87 FPS) providing smooth gameplay. 1440p is viable with Medium (74 FPS), but High (57 FPS) and Ultra (43 FPS) require compromises. The 1440p Medium result (74 FPS) is still 35% below the 1080p Medium result, so users with high-refresh 1080p monitors will get the best experience.
Hardware Specifications
Intel Core Ultra 9 290K Plus
AMD Radeon RX 6600
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 9 290K Plus + AMD Radeon RX 6600 in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 51.0 |
| 3840x2160 | Medium | 41.0 |
| 3840x2160 | High | 32.0 |
| 3840x2160 | Ultra | 24.0 |
| 2560x1440 | Low | 92.0 |
| 2560x1440 | Medium | 74.0 |
| 2560x1440 | High | 57.0 |
| 2560x1440 | Ultra | 43.0 |
| 1920x1080 | Low | 139.0 |
| 1920x1080 | Medium | 113.0 |
| 1920x1080 | High | 87.0 |
| 1920x1080 | Ultra | 66.0 |
Palworld with iUltra 9 290K Plus + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RX 6600 + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with iUltra 9 290K Plus + RX 6600
Explore FPS benchmarks for other games using this same hardware combination.