Palworld
This combination delivers exceptional performance with an average of 147 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 52 | 68 | 89 | 109 |
| 1440p QHD | 93 | 123 | 160 | 197 |
| 1080p Full HD | 141 | 186 | 242 | 299 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with Intel Core Ultra 7 265 + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis
Palworld is an early-access survival title that stresses both CPU and GPU depending on the settings and resolution chosen. For the combination of the Intel Core Ultra 7 265 and the NVIDIA GeForce RTX 5070 Ti, the benchmark data shows a system that delivers high frame rates at 1080p, remains very playable at 1440p, and starts to show GPU limitations at 4K. The measured results place this combo at rank 272 out of 2944 tested combinations, putting it in the top 10% of all tested pairings for this game.
CPU Role — cores, clocks, and how they relate to this game's results
The Intel Core Ultra 7 265 is a 20-core, 20-thread processor from the Core Ultra Series 2, based on the Arrow Lake architecture. It operates with a base clock of 2.40 GHz and a boost clock of 5.30 GHz, with a 30 MB shared L3 cache. For a game like Palworld, which involves world simulation, creature AI, and base building, the CPU's high boost clock is critical for maintaining consistent frame pacing, particularly at lower resolutions where the GPU is not the bottleneck.
The data shows that at 1920x1080 with Low settings, the combo achieves an average of 299 FPS. This is the highest measured frame rate across all configurations, and it strongly suggests that the CPU is capable of feeding the GPU at extremely high rates. The single-core performance of this processor is also notable, with a Cinebench R23 single-core score of 5960 and a Passmark single-thread score of 4689. Palworld's game logic is often bound by single-thread performance, so this strength directly supports the high frame rates seen at 1080p.
However, the CPU is not the limiting factor in most gaming scenarios here. The processor's multi-core capabilities, evidenced by a Cinebench R23 multi-core score of 42216 and a Passmark multithread score of 49682, are ample for the game's background tasks. The data suggests that while the CPU is strong, the GPU begins to dominate performance as resolution increases. At 3840x2160, the frame rates drop significantly across all settings, indicating that the RTX 5070 Ti is the primary constraint at that resolution. The CPU's role is to avoid bottlenecking, which it does effectively, as shown by the 299 FPS ceiling at 1080p Low.
The processor's 20 threads and high boost clock also help maintain stability in demanding scenarios. In the measured Medium settings at 1440p, the average FPS is 160 with a minimum of 136, showing that the CPU can keep up with the GPU's output without causing severe frame drops. Compared to its nearest rivals, the Core Ultra 7 265 sits within 0.7% of the AMD EPYC 7343 and 0.3% of the Intel Core Ultra 7 265F, making it a balanced performer in synthetic benchmarks. For Palworld specifically, the combination of high single-thread speed and adequate multi-thread resources ensures that the CPU does not become a bottleneck until well past the frame rates most displays can handle.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce RTX 5070 Ti is built on the Blackwell 2.0 architecture with 16 GB of GDDR7 memory on a 256-bit bus, delivering 896.0 GB/s of bandwidth. It features a base clock of 2295 MHz and a boost clock of 2452 MHz. For Palworld, which features expansive open-world environments with dense foliage and dynamic lighting, the 16 GB VRAM capacity is more than sufficient at all tested resolutions, ensuring that texture streaming and asset loading do not cause stuttering.
The GPU's performance is clearly the deciding factor at higher resolutions. The measured FPS at 3840x2160 shows a steep drop compared to 1440p. At 4K with Ultra settings, the average FPS is 52, which is below the 60 FPS threshold for smooth gameplay. At 4K High, the average improves to 68 FPS, and at 4K Medium, it reaches 89 FPS with a minimum of 75. The GPU's raw compute power, measured at 43.94 TFLOPS FP32, is being heavily taxed at this resolution. The data indicates that the RTX 5070 Ti is capable of handling Palworld at 4K, but only at lower presets if a consistent 60+ FPS is desired.
The GPU's memory bandwidth of 896.0 GB/s is another key factor. Palworld's large map and many on-screen objects require rapid data access. At 1440p, the GPU delivers strong results, with 123 FPS at High and 93 FPS at Ultra. The gap between Low and Ultra at 1440p (197 FPS vs 93 FPS) shows that the GPU's shading units and ROPs are the limiting factor when graphical effects are maxed out. The RTX 5070 Ti has 8960 shading units and 96 ROPs, and these figures correlate with the observed scaling.
In synthetic benchmarks, the RTX 5070 Ti scores 32974 in Passmark G3D and 20203 in Passmark GPU Compute, placing it in the 86th percentile of all GPUs. Its nearest rivals include the AMD Radeon RX 6900 XT (2% higher average score) and the AMD Radeon RX 6800 XT (3.1% lower average score). For Palworld, the GPU's performance is well-balanced for 1440p gaming, where it delivers frame rates that far exceed typical display refresh rates. At 4K, however, the GPU's limitations become apparent, especially at Ultra settings where the average FPS drops to 52.
FAQ — 4-6 Q&A pairs answerable from FACT PACK data
Q: What is the best resolution for this combo to maintain over 100 FPS on High settings?
A: At 2560x1440 with High settings, the combo achieves an average of 123 FPS, which is comfortably above 100. At 1920x1080 with High settings, the average is 186 FPS. At 3840x2160 with High settings, the average drops to 68 FPS, so 1440p is the highest resolution that keeps High settings above the 100 FPS mark.
Q: How much faster is the Low preset compared to Ultra at 1080p?
A: At 1920x1080, the Low preset delivers an average of 299 FPS, while the Ultra preset delivers 141 FPS. This represents a performance gain of over double, with Low being approximately 112% faster than Ultra at this resolution.
Q: Does the combo maintain a consistent frame rate at 1440p Medium?
A: Yes. At 2560x1440 with Medium settings, the average FPS is 160, with a minimum of 136 and a maximum of 184. This indicates that the frame rate is stable with no severe dips, suggesting both the CPU and GPU are well-matched for this configuration.
Q: Is the RTX 5070 Ti's 16 GB VRAM sufficient for Palworld at 4K?
A: The measured data shows playable frame rates at 4K, with an average of 68 FPS at High settings and 89 FPS at Medium settings. The 16 GB VRAM capacity does not appear to be a limiting factor, as the GPU's compute performance is what constrains the frame rates at this resolution.
Q: How does this combo's rank compare to other tested combinations?
A: The combo is ranked 272 out of 2944 tested combinations in Palworld, placing it in the top 10% of all tested pairings. This indicates that the combination of the Core Ultra 7 265 and RTX 5070 Ti is well-suited for this game.
Q: What is the single highest average FPS measured for this combo?
A: The highest average FPS is 299, achieved at 1920x1080 with Low settings. This is the only configuration that approaches the 300 FPS mark, and it highlights the CPU's ability to drive high frame rates when the GPU is not heavily loaded.
How This Combo Ranks
The Intel Core Ultra 7 265 and NVIDIA GeForce RTX 5070 Ti combination holds the 272nd position out of 2944 tested combos in Palworld. This ranking places it in the top 9.2% of all tested pairings, indicating that this hardware pairing is notably stronger than the majority of systems in the database. The rank reflects a balance between the CPU's strong single-thread performance and the GPU's substantial compute resources.
The CPU's percentile of 93 among all CPUs and the GPU's percentile of 86 among all GPUs both contribute to this high ranking. However, the rank is not purely an average of these percentiles, as the game's specific engine and optimization patterns can shift the balance. The measured frame rates show that the combo excels at 1080p and 1440p, where it delivers frame rates that are well above the thresholds for smooth gameplay. At 4K, the combo still performs respectably, but the rank would likely be lower if only 4K results were considered.
Compared to other combos in the database, this pairing sits ahead of systems with lower-tier GPUs or CPUs, as evidenced by the rank of 272. The nearest CPU rivals, such as the AMD EPYC 7343 and Intel Core Ultra 7 265F, have average benchmark scores within 0.7% of the Core Ultra 7 265, suggesting that similar CPU choices would not dramatically alter the combo's rank. On the GPU side, the RTX 5070 Ti's performance is close to the AMD Radeon RX 6900 XT, which is 2% higher in average score, meaning that swapping to that GPU might slightly improve the rank. Overall, the data indicates that this combo is well-optimized for Palworld, providing high frame rates across most settings and resolutions.
Measured FPS Breakdown
The measured FPS data provides a clear picture of how this combo performs across three resolutions and four settings presets.
At 1920x1080, the combo delivers its highest frame rates. With Low settings, the average FPS is 299. Medium settings produce an average of 242 FPS, with a minimum of 206 and a maximum of 279. High settings yield an average of 186 FPS. Ultra settings bring the average down to 141 FPS. This shows a steady decline from Low to Ultra, with the gap between Low and Ultra being 158 FPS.
At 2560x1440, the performance scales down as expected. Low settings average 197 FPS. Medium settings average 160 FPS, with a minimum of 136 and a maximum of 184. High settings average 123 FPS. Ultra settings average 93 FPS. The drop from 1080p to 1440p at the same settings is consistent: Low drops by 102 FPS, Medium by 82 FPS, High by 63 FPS, and Ultra by 48 FPS. This suggests that the GPU is becoming more of a limiting factor as resolution increases.
At 3840x2160, the frame rates fall further. Low settings average 109 FPS. Medium settings average 89 FPS, with a minimum of 75 and a maximum of 102. High settings average 68 FPS. Ultra settings average 52 FPS. The drop from 1440p to 4K is significant: Low drops by 88 FPS, Medium by 71 FPS, High by 55 FPS, and Ultra by 41 FPS. At 4K Ultra, the average FPS of 52 is below the 60 FPS target for most gamers, indicating that this setting is not ideal for this combo.
The data also shows that the gap between Low and Ultra narrows as resolution increases. At 1080p, the difference is 158 FPS (299 vs 141). At 1440p, the difference is 104 FPS (197 vs 93). At 4K, the difference is 57 FPS (109 vs 52). This trend confirms that the GPU is the primary bottleneck at higher resolutions, as the impact of lowering settings diminishes.
Settings Recommendations
Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and desired frame rate.
For 1920x1080, all settings presets deliver playable frame rates. Ultra settings at 141 FPS are well above the 60 FPS threshold and provide the best visual quality. Given the high headroom, users can comfortably select Ultra settings at 1080p for the best experience. If a user prioritizes maximum frame rates, Medium settings at 242 FPS offer a significant boost without a major visual penalty, but Ultra is recommended for the best balance.
For 2560x1440, the choice becomes more nuanced. Ultra settings at 93 FPS are still smooth and provide the highest visual fidelity. High settings at 123 FPS offer a noticeable frame rate improvement with only a minor reduction in graphical quality. Medium settings at 160 FPS are excellent for competitive play or high refresh rate monitors. The data suggests that High settings are the sweet spot at 1440p, delivering 123 FPS while maintaining good visuals.
For 3840x2160, the user must make compromises. Ultra settings at 52 FPS are below the 60 FPS target and may result in a less smooth experience. High settings at 68 FPS are playable and offer a good balance. Medium settings at 89 FPS provide a comfortable margin above 60 FPS and are the recommended choice for 4K gaming. Low settings at 109 FPS are also viable, but the visual quality drop may not be worth the extra frames.
Overall, the best experience per the measured rows is achieved by selecting High settings at 1440p, where the combo delivers 123 FPS with a good balance of quality and performance. For 4K users, Medium settings at 89 FPS are recommended to ensure a stable frame rate above 60 FPS.
Resolution Scaling
The frame rate scaling from 1080p to 4K reveals important insights about the limiting component in this combo.
From 1920x1080 to 2560x1440, the average FPS drops by approximately 34-52% depending on the settings preset. For example, at High settings, the drop is from 186 FPS to 123 FPS, a reduction of 34%. At Ultra settings, the drop is from 141 FPS to 93 FPS, a reduction of 34%. This consistent percentage drop indicates that the GPU is beginning to become the limiting factor as resolution increases, but the CPU still has enough headroom to support these frame rates.
From 2560x1440 to 3840x2160, the drop is more pronounced. At High settings, the average FPS falls from 123 to 68, a reduction of 45%. At Ultra settings, the drop is from 93 to 52, a reduction of 44%. This steeper decline confirms that the GPU is the primary bottleneck at 4K. The CPU's performance, which is sufficient for 1080p and 1440p, is no longer the constraint at 4K.
The data also shows that the impact of settings changes diminishes as resolution increases. At 1080p, the difference between Low and Ultra is 158 FPS. At 4K, the difference is only 57 FPS. This is because at 4K, the GPU is so heavily loaded that reducing settings has a smaller relative impact on frame rates. The GPU's rendering workload at 4K dominates the performance equation, making the CPU's contribution less significant.
The limiting component analysis is clear: at 1080p and 1440p, the combo is well-balanced, with the CPU providing enough frames to keep the GPU busy. At 4K, the GPU becomes the limiting factor, as evidenced by the significant frame rate drops across all settings. The 16 GB VRAM and high bandwidth of the RTX 5070 Ti are sufficient, but the raw compute power is not enough to maintain high frame rates at 4K Ultra. For users seeking the best performance at 4K, lowering settings to Medium or High is necessary to achieve playable frame rates.
Hardware Specifications
Intel Core Ultra 7 265
NVIDIA GeForce RTX 5070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 7 265 + NVIDIA GeForce RTX 5070 Ti in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 109.0 |
| 3840x2160 | Medium | 89.0 |
| 3840x2160 | High | 68.0 |
| 3840x2160 | Ultra | 52.0 |
| 2560x1440 | Low | 197.0 |
| 2560x1440 | Medium | 160.0 |
| 2560x1440 | High | 123.0 |
| 2560x1440 | Ultra | 93.0 |
| 1920x1080 | Low | 299.0 |
| 1920x1080 | Medium | 242.0 |
| 1920x1080 | High | 186.0 |
| 1920x1080 | Ultra | 141.0 |
Palworld with iUltra 7 265 + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RTX 5070 Ti + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with iUltra 7 265 + RTX 5070 Ti
Explore FPS benchmarks for other games using this same hardware combination.