Palworld

Palworld

AVERAGE FPS
92
good

This combination provides smooth gameplay with an average of 92 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 43 55 68
1440p QHD 58 77 100 123
1080p Full HD 88 117 151 187

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 68
3840x2160 Medium 55
3840x2160 High 43
3840x2160 Ultra 32
2560x1440 Low 123
2560x1440 Medium 100
2560x1440 High 77
2560x1440 Ultra 58
1920x1080 Low 187
1920x1080 Medium 151
1920x1080 High 117
1920x1080 Ultra 88

Palworld with Intel Core Ultra 7 265 + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis

Palworld pairs the Intel Core Ultra 7 265 with the NVIDIA GeForce RTX 3060 Ti, a combination that lands mid-pack in the database’s tested combos. The CPU is a 20-core Arrow Lake part with a 5.30 GHz boost clock, while the GPU is an 8 GB Ampere card with 4864 shading units. Measured frame rates across three resolutions and four settings presets reveal a system that scales predictably, with the RTX 3060 Ti becoming the clear bottleneck as resolution climbs, though the Core Ultra 7 265’s strong single-thread results keep 1080p performance high.

Resolution Scaling

The measured FPS data shows a consistent and steep drop as resolution increases from 1920x1080 to 3840x2160, which is typical for a game like Palworld that stresses the GPU heavily at higher pixel counts. At High settings, the average frame rate falls from 117 FPS at 1080p to 77 FPS at 1440p, then to 43 FPS at 4K. That represents a 34% reduction from 1080p to 1440p and a further 44% reduction from 1440p to 4K, meaning the 4K result is roughly 63% lower than the 1080p figure. This steep scaling curve indicates that the RTX 3060 Ti’s 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are being pushed hard at 4K, where the pixel count quadruples relative to 1080p.

Low settings tell a similar story but with higher absolute numbers. At 1080p Low, the combo achieves 187 FPS, which drops to 123 FPS at 1440p and 68 FPS at 4K. The percentage drops are 34% and 45% respectively, mirroring the High preset closely. This suggests that the GPU’s fillrate and memory bandwidth are the limiting factors regardless of quality settings, as the relative scaling remains nearly constant. Medium settings sit between these extremes, with 151 FPS at 1080p, 100 FPS at 1440p, and 55 FPS at 4K, showing a similar pattern of diminishing returns as resolution increases.

Ultra settings produce the lowest frame rates, with 88 FPS at 1080p, 58 FPS at 1440p, and just 32 FPS at 4K. The 4K Ultra result is particularly telling, as it falls below the 60 FPS threshold that most gamers consider playable, and even the 1440p Ultra figure of 58 FPS is marginal. The scaling from 1080p Ultra to 4K Ultra shows a 64% reduction, slightly steeper than the other presets, which indicates that the combination of high-quality effects and high resolution overwhelms the GPU’s capabilities. Benchmark results indicate that the Core Ultra 7 265, with its 5.30 GHz boost and 30 MB of L3 cache, is not the limiting factor at any resolution; instead, the RTX 3060 Ti’s 8 GB VRAM and 16.20 TFLOPS FP32 throughput define the performance ceiling.

How This Combo Ranks

In the database’s measured combos for Palworld, this pairing of the Intel Core Ultra 7 265 and NVIDIA GeForce RTX 3060 Ti ranks 1419 out of 2944 tested combinations. That places it just below the median, which is a reasonable result given the GPU’s age and mid-range positioning. The RTX 3060 Ti sits at the 59th percentile among all GPUs in the database, while the Core Ultra 7 265 achieves a 93rd percentile ranking among all CPUs, so the processor is far stronger than the graphics card relative to their respective pools. This disparity explains why the combo’s overall rank is not higher; the GPU drags down what would otherwise be a top-tier CPU pairing.

The CPU’s nearest rivals in the database include the AMD EPYC 4464P, which scores 64823 on average against the Core Ultra 7 265’s 64640, a delta of -0.3%, and the Intel Core Ultra 7 265F, which scores 64438, a delta of +0.3%. These are essentially identical performance levels, confirming that the 265 is a well-balanced mid-range-to-high-end processor with no significant outliers in its class. The AMD EPYC 7343 and EPYC 9124 are also within 0.7% of the 265’s average score, showing that the CPU’s performance is tightly clustered with other 20-core parts.

On the GPU side, the RTX 3060 Ti’s nearest rivals are the AMD Radeon RX 9060, which scores 16014 against the 3060 Ti’s 16129, a delta of +0.7%, and the AMD Radeon Pro 5600M, which scores 16351, a delta of -1.4%. The AMD Radeon RX 5700 XT is also close at 16361, with a delta of -1.4%, meaning all three of these cards are within a couple of percent of the 3060 Ti’s average benchmark score. This tight grouping suggests that the 3060 Ti is not uniquely positioned; it trades blows with several AMD alternatives, and in Palworld specifically, the combo rank reflects that middling status. The data shows that the 1419th rank out of 2944 combos is consistent with a GPU that sits near the 50th percentile of all graphics cards, even though the CPU is in the top 7% of all processors.

GPU Role

The RTX 3060 Ti’s specifications directly explain its behavior in Palworld. It has 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth. That memory capacity is modest by modern standards, and at 4K with High or Ultra settings, the game’s textures and effects can easily push against that limit. The GPU’s base clock is 1410 MHz with a boost of 1665 MHz, and it has 152 texture mapping units and 80 ROPs, which handle the rasterization workload. Its 38 ray tracing cores and 152 tensor cores are present but not heavily utilized in Palworld, which is primarily a rasterization-focused title based on the measured data.

The GPU’s FP32 performance is 16.20 TFLOPS, and its pixel rate is 133.2 GPixel/s, while its texture rate is 253.1 GTexel/s. These figures place the 3060 Ti as a solid 1080p and 1440p card, but the 4K results confirm that it lacks the raw throughput for high-refresh 4K gaming. At 4K Medium, the average FPS is 55 with a minimum of 47 and a maximum of 64, which shows that even at medium quality, the GPU cannot maintain a consistent 60 FPS. The 4K Low figure of 68 FPS is the only 4K result above 60, and it requires dropping to the lowest quality preset.

The GPU’s 8 GB VRAM is a particular concern at 4K Ultra, where the average FPS falls to 32. While the data does not include VRAM usage, the dramatic drop from Medium (55 FPS) to Ultra (32 FPS) suggests that the memory capacity or bandwidth is being saturated, forcing the GPU to spill over or reduce throughput. At 1440p, the GPU performs much better, with High hitting 77 FPS and Medium hitting 100 FPS, indicating that 1440p is the sweet spot for this card. The 1080p results, with High at 117 FPS and Medium at 151 FPS, show that the GPU can deliver high refresh rates at lower resolutions, but the Core Ultra 7 265’s strong single-core performance (Cinebench R23 single-core score of 5960) ensures that the CPU does not bottleneck these frame rates.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results across all presets. Low settings produce an average of 187 FPS, which is the highest figure in the entire dataset. Medium settings follow at 151 FPS, with a minimum of 129 and a maximum of 174, showing a tight frame time distribution. High settings drop to 117 FPS, and Ultra settings fall to 88 FPS. These numbers indicate that at 1080p, the RTX 3060 Ti has enough headroom to handle even Ultra settings comfortably, and the Core Ultra 7 265’s high boost clock ensures that the CPU can feed the GPU adequately. The 187 FPS Low result is particularly notable, as it exceeds the refresh rate of most standard monitors, making this combo suitable for competitive play at 1080p with lowered settings.

Moving to 2560x1440, the performance drops noticeably but remains playable for most presets. Low settings yield 123 FPS, which is still above 120 Hz and suitable for high-refresh 1440p monitors. Medium settings produce 100 FPS, with a minimum of 85 and a maximum of 115, indicating some frame time variance but generally smooth gameplay. High settings drop to 77 FPS, which is above 60 but not by a huge margin, and Ultra settings fall to 58 FPS, just below the 60 FPS target. The 1440p Ultra result of 58 FPS is the only sub-60 figure at this resolution, suggesting that users who want to play at 1440p with maximum settings will need to accept occasional dips or reduce some options.

At 3840x2160, the GPU is clearly overmatched. Low settings produce 68 FPS, which is playable but not high-refresh. Medium settings drop to 55 FPS, with a minimum of 47 and a maximum of 64, meaning that frame times can spike significantly. High settings fall to 43 FPS, and Ultra settings drop to 32 FPS, both of which are below the threshold for smooth gameplay. The 4K data shows that the RTX 3060 Ti simply does not have enough memory bandwidth or shading power to handle Palworld at this resolution with any quality preset except Low. The gap between 1080p Ultra (88 FPS) and 4K Ultra (32 FPS) is 64%, which is a severe reduction that underscores the GPU’s limitations.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: Based on the measured data, 2560x1440 offers the best balance of quality and performance. At 1440p Medium, the combo achieves 100 FPS average, and at High it hits 77 FPS. The 1080p results are higher, with 117 FPS at High, but 1440p provides a sharper image while remaining above 60 FPS for most presets.

Q: Can this system handle 4K gaming in Palworld?

A: Only at Low settings, where it averages 68 FPS. At Medium, the average drops to 55 FPS, and at High and Ultra, it falls to 43 FPS and 32 FPS respectively. These results indicate that 4K is not practical for this combo unless the user is willing to accept Low quality or frame rates below 60.

Q: How does the RTX 3060 Ti compare to its nearest rivals in the database?

A: The RTX 3060 Ti’s average benchmark score is 16129, which is 0.7% higher than the AMD Radeon RX 9060 (16014) and 1.4% lower than the AMD Radeon Pro 5600M (16351). It also sits 1.4% below the AMD Radeon RX 5700 XT (16361). These deltas show that the 3060 Ti is essentially on par with those cards.

Q: Is the Intel Core Ultra 7 265 a bottleneck in Palworld?

A: No, the data does not indicate a CPU bottleneck. The Core Ultra 7 265 has a Cinebench R23 multi-core score of 42216 and a single-core score of 5960, placing it in the 93rd percentile of all CPUs. The FPS scaling from 1080p to 4K closely follows the GPU’s expected performance curve, which means the RTX 3060 Ti is the limiting component.

Q: What settings preset gives the highest frame rate at 1080p?

A: The Low preset provides the highest average FPS at 1920x1080, reaching 187 FPS. Medium follows at 151 FPS, High at 117 FPS, and Ultra at 88 FPS. If maximum frame rate is the goal, Low is the clear choice.

Q: How does the combo rank among all tested combos for Palworld?

A: It ranks 1419 out of 2944 tested combinations. This places it just below the median, which is consistent with the RTX 3060 Ti’s 59th percentile GPU ranking and the Core Ultra 7 265’s 93rd percentile CPU ranking.

Settings Recommendations

For users prioritizing high frame rates at 1920x1080, the Low preset delivers an average of 187 FPS, which is ideal for competitive play or high-refresh monitors. However, the Medium preset at 151 FPS offers a significant visual upgrade with only a 19% performance cost, and the 129 FPS minimum ensures that frame times remain stable. The High preset at 117 FPS is also viable for most 1080p displays, but Ultra at 88 FPS is the only preset that might dip below 60 FPS on slower systems, though this combo maintains it well above that threshold.

At 2560x1440, the Medium preset is the best recommendation, as it achieves 100 FPS average with a minimum of 85 FPS, providing smooth gameplay without major stutters. The High preset at 77 FPS is acceptable for users who prefer better visuals, but the Ultra preset at 58 FPS falls just short of 60 FPS, so it is not ideal for those sensitive to frame rate dips. Low at 123 FPS is an option for competitive 1440p play, but the visual compromise is substantial.

At 3840x2160, the only playable option is the Low preset, which averages 68 FPS. Medium at 55 FPS is borderline, with a 47 FPS minimum that could cause noticeable hitches, and High and Ultra are too slow for a smooth experience. Given that the 4K Ultra result of 32 FPS is below half the refresh rate of most 4K monitors, users with 4K displays should either lower the resolution to 1440p or accept Low settings. The data suggests that the RTX 3060 Ti’s 8 GB VRAM and 448.0 GB/s bandwidth are insufficient for high-quality 4K in Palworld, making 1440p the practical ceiling for this combo. For an optimal balance of visual fidelity and frame rate, 1440p Medium or High is recommended, as both stay above 60 FPS while offering a much sharper image than 1080p.

Hardware Specifications

Intel Core Ultra 7 265

Cores / Threads 20 / 20
Base Clock 2400 MHz
Boost Clock 5300 MHz
TDP 65W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce RTX 3060 Ti

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1665 MHz MHz
TDP 200 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 7 265 + NVIDIA GeForce RTX 3060 Ti in Palworld

Resolution Settings Avg FPS
3840x2160 Low 68.0
3840x2160 Medium 55.0
3840x2160 High 43.0
3840x2160 Ultra 32.0
2560x1440 Low 123.0
2560x1440 Medium 100.0
2560x1440 High 77.0
2560x1440 Ultra 58.0
1920x1080 Low 187.0
1920x1080 Medium 151.0
1920x1080 High 117.0
1920x1080 Ultra 88.0

Palworld with iUltra 7 265 + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RTX 3060 Ti + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with iUltra 7 265 + RTX 3060 Ti

Explore FPS benchmarks for other games using this same hardware combination.