Palworld
This combination provides smooth gameplay with an average of 82 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 29 | 38 | 49 | 61 |
| 1440p QHD | 52 | 69 | 89 | 110 |
| 1080p Full HD | 79 | 104 | 135 | 167 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with Intel Core Ultra 7 165H + AMD Radeon 8060S, In-Depth Analysis
Palworld, the survival title from early 2024, presents a demanding open world where the Intel Core Ultra 7 165H and AMD Radeon 8060S combination must balance creature-filled landscapes with real-time physics. The data for this pairing reveals a system that scales predictably across resolutions, with the integrated-class GPU acting as the primary constraint at higher fidelity targets. This analysis examines the measured FPS rows to determine where the bottleneck lies and how the components interact.
Resolution Scaling
The measured FPS shows a clear and consistent decline as resolution increases, which is typical for a system where the graphics processor is the limiting factor. At 1920x1080 with High settings, the combo produces 104 FPS. Moving to 2560x1440 drops this to 69 FPS, a reduction of 35 FPS or roughly 33%. The jump to 3840x2160 further reduces performance to 38 FPS, which is a 45% drop from the 1440p figure and a 63% drop from the 1080p baseline. This pattern indicates that the rendering load is scaling heavily with pixel count, pointing directly at the GPU.
The data suggests that at 1080p, the system has enough headroom to push frame rates well above 100 FPS, but the Radeon 8060S begins to struggle as the pixel count increases. The gap between Low and Ultra settings widens dramatically at higher resolutions. At 1080p, the difference between Low (167 FPS) and Ultra (79 FPS) is 88 FPS. At 4K, the same setting gap shows only a 32 FPS difference (61 FPS Low vs 29 FPS Ultra). This compression of the performance range at 4K indicates that the GPU is hitting its raw throughput ceiling, making the quality preset less impactful than the resolution itself.
Interestingly, the Medium preset at 1440p yields 89 FPS, which is closer to the High preset's 69 FPS than one might expect. This suggests that the transition from Medium to High incurs a significant cost, while the step from Low to Medium is more modest. At 4K, the Medium preset's minimum FPS of 42 and maximum of 57 shows that even with some variance, the system is hovering around playable territory, but the average of 49 FPS is far from the smoothness of the 1080p results. The data implies that for a consistent 60 FPS experience, 1440p is the effective ceiling for this combo at higher settings, while 1080p offers the most flexibility.
CPU Role
The Intel Core Ultra 7 165H is a 16-core, 22-thread processor based on the Meteor Lake architecture, with a base clock of 3.80 GHz and a boost clock of 5.00 GHz. Its 24 MB of shared L3 cache and 89.6 GB/s memory bandwidth provide a solid foundation for gaming, but the benchmark data suggests that in Palworld, the CPU is rarely the limiting factor. The Cinebench R23 multi-core score of 14551 and single-core score of 1759 place this chip in the 84th percentile of all CPUs, indicating strong general-purpose performance.
Looking at the frame rates, the CPU's role becomes clearer when examining the scaling from 1080p to 1440p. At High settings, the drop from 104 FPS to 69 FPS is a 35 FPS reduction, which is a significant percentage change. This is a classic sign that the GPU is becoming saturated, as a CPU-bound scenario would show a much smaller FPS delta between resolutions. The fact that the 1080p Low preset hits 167 FPS shows that the CPU and memory subsystem can feed the GPU well beyond the rates seen at higher quality settings. The Passmark multithread score of 25933 and single-thread score of 3509 reinforce that this processor has ample headroom for the game's logic and physics.
The nearest rivals for this CPU include the Intel Core Ultra 5 338H and AMD Ryzen 7 3700X, with average benchmark scores within 0.5% of the 165H. This suggests that the CPU's performance is well within a competitive band, and any differences in Palworld frame rates would be negligible. The data shows that the 165H's 16 cores and 22 threads are more than sufficient for the survival genre's typical background simulations, and the bottleneck at higher resolutions is firmly on the graphics side. The boost clock of 5.00 GHz ensures that single-threaded tasks, which often dominate game logic, are handled briskly.
FAQ
Q: What is the highest average FPS recorded for this combo in Palworld?
A: The highest average FPS is 167, achieved at 1920x1080 with Low settings.
Q: At which resolution does the combo fail to maintain a 60 FPS average on High settings?
A: At 3840x2160, the High preset yields an average of 38 FPS, which is well below 60 FPS. At 2560x1440, the High preset averages 69 FPS, which is above the threshold.
Q: How much of a performance drop occurs when moving from 1080p to 4K on Medium settings?
A: The Medium preset drops from 135 FPS at 1920x1080 to 49 FPS at 3840x2160, a reduction of 86 FPS.
Q: Is the CPU or GPU more likely to be the bottleneck at 4K Ultra settings?
A: The 4K Ultra preset averages only 29 FPS, and given that the CPU is capable of 167 FPS at 1080p Low, the GPU is clearly the limiting component.
Q: What is the minimum FPS recorded across all tested configurations?
A: The only minimum FPS values provided are for Medium settings: 115 FPS at 1080p, 76 FPS at 1440p, and 42 FPS at 4K. The lowest minimum is 42 FPS at 4K.
Q: How does this combo's rank in Palworld compare to its overall hardware percentile?
A: The combo ranks 2181 out of 3711 tested combinations, placing it in the 59th percentile for this game. The CPU is in the 84th percentile and the GPU is in the 87th percentile, meaning the combo rank is lower than either component's individual standing.
How This Combo Ranks
The combo's rank in Palworld is 2181 out of 3711 tested combinations, which places it in the lower-middle portion of the field. This is a notable discrepancy when considering the individual component strengths. The CPU sits in the 84th percentile of all processors, and the GPU is in the 87th percentile of all graphics cards. Yet the pairing only achieves a rank that puts it at roughly 59th percentile of combos. This suggests that the integration of these two parts does not translate into a top-tier gaming experience for this specific title, likely due to the system-shared memory architecture of the Radeon 8060S.
The gap between component percentiles and the final combo rank implies that Palworld's engine is sensitive to memory bandwidth or latency in ways that this integrated setup cannot fully overcome. The Radeon 8060S uses "System Shared" memory, which means it relies on the CPU's DDR5 memory, and this shared configuration may introduce bottlenecks that standalone GPUs with dedicated VRAM do not face. The data shows that while the GPU's raw compute benchmarks (like the 3DMark Steel Nomad score of 2162) are competitive, the real-world gaming result is less impressive.
Compared to other combos, this pairing is not a top performer, but it is also not at the bottom. The rank of 2181 out of 3711 means there are 1530 combos that perform worse and 2180 that perform better. This places the system in a position where it can handle the game at moderate settings, but it will not excel at high refresh rates or maxed-out quality. The data suggests that users should temper expectations for 4K gaming, as the combo rank reflects a system optimized for 1080p and acceptable 1440p play.
GPU Role
The AMD Radeon 8060S is the heart of this system's graphical output, based on the RDNA 3.5 architecture and built on a 4 nm process. It features 2560 shading units, 160 TMUs, and 64 ROPs, with a boost clock of 2900 MHz. The GPU's compute power is rated at 14.85 TFLOPS for FP32 operations, and its pixel rate of 185.6 GPixel/s and texture rate of 464.0 GTexel/s are substantial numbers. However, the critical detail is that its memory is "System Shared," with bandwidth listed as "System Dependent." This means the GPU's performance is intrinsically tied to the CPU's memory controller and the system's DDR5 configuration.
The benchmark results show that the GPU has a strong theoretical foundation. Its 3DMark Steel Nomad DX12 score of 2162 and Geekbench Vulkan score of 80483 place it in the 87th percentile of all GPUs. Its nearest rivals include the AMD Radeon RX 6750 GRE 12 GB and the NVIDIA GeForce RTX 5080, with delta percentages of 0.1% and -0.6% respectively. This indicates that in synthetic tests, the 8060S trades blows with dedicated discrete graphics cards. Yet in Palworld, the measured FPS tells a different story. At 4K Ultra, the GPU produces only 29 FPS, which is a stark contrast to its high percentile ranking.
The GPU's role as the limiting factor is evident when examining the 1080p Low preset's 167 FPS. This high number suggests the GPU is not the bottleneck at lower resolutions and settings, but rather the system's memory bandwidth is sufficient to feed it. As settings increase, the GPU's shading units and ROPs become saturated, leading to the dramatic FPS drops observed. The 4K Medium preset's average of 49 FPS, with a minimum of 42 and maximum of 57, shows that even at moderate settings, the GPU struggles to maintain smooth frame rates at high pixel counts. The data implies that this GPU is best suited for 1080p gaming, where it can fully stretch its legs.
Measured FPS Breakdown
At 1920x1080, the system delivers its strongest performance. The Low preset achieves an average of 167 FPS, which is exceptionally smooth. The Medium preset averages 135 FPS, with a minimum of 115 and maximum of 156, indicating consistent frame times. The High preset drops to 104 FPS, still well above the 60 FPS threshold for most displays. The Ultra preset manages 79 FPS, which is playable but shows a significant 88 FPS gap from Low to Ultra. This resolution is clearly where this combo excels, offering high refresh rate potential even at High settings.
Moving to 2560x1440, the performance scales down proportionally. Low averages 110 FPS, which is still very good. Medium averages 89 FPS, with a minimum of 76 and maximum of 103, showing a slight variance but remaining smooth. High drops to 69 FPS, which is above 60 FPS but leaves little headroom for demanding scenes. Ultra averages 52 FPS, which is below the 60 FPS target and may result in noticeable stutters in busy areas. The data shows a 58 FPS difference between Low and Ultra at this resolution, indicating that the GPU is becoming more of a limiting factor.
At 3840x2160, the system struggles to maintain playable frame rates on higher presets. Low averages 61 FPS, which is just at the edge of playability. Medium averages 49 FPS, with a minimum of 42 and maximum of 57, showing that even the average is below 60 FPS. High averages 38 FPS, and Ultra drops to 29 FPS. The 32 FPS difference between Low and Ultra at 4K is much smaller than at lower resolutions, confirming that the GPU is hitting its raw performance ceiling. The data indicates that this combo is not suitable for 4K gaming beyond the Low preset.
Settings Recommendations
Based on the measured FPS data, the optimal experience for this combo depends heavily on the target resolution. At 1920x1080, the High preset at 104 FPS offers the best balance of visual quality and performance. It provides a substantial improvement over Medium's 135 FPS in terms of visual fidelity, while still maintaining a frame rate that is well above the 60 FPS standard. The Ultra preset at 79 FPS is also viable, but the 25 FPS drop from High may not justify the marginal visual gains in a game like Palworld where the environment is already visually busy.
For users targeting 2560x1440, the Medium preset at 89 FPS is the recommended choice. It delivers a smooth experience that is above the 60 FPS threshold, with a minimum of 76 FPS ensuring that most scenes remain fluid. The High preset at 69 FPS is acceptable, but the 20 FPS drop from Medium suggests that the additional graphical effects are costly. The Low preset at 110 FPS is unnecessary unless the user prioritizes maximum frame rates over visual quality. Ultra at 52 FPS is not recommended as it falls below the 60 FPS target and may cause noticeable stuttering in combat or exploration.
At 3840x2160, the data strongly suggests avoiding higher presets. The Low preset at 61 FPS is the only configuration that achieves a playable average, and even this is borderline. The Medium preset at 49 FPS is below the 60 FPS threshold and may cause discomfort for sensitive users. The High and Ultra presets at 38 FPS and 29 FPS respectively are not recommended for a playable experience. For 4K users, the best experience per the measured rows is to stick with Low settings, or to consider lowering the resolution to 1440p to use the Medium or High presets for a better visual experience. The data indicates that this combo is best utilized at 1080p or 1440p, where it can offer a balance of quality and performance.
Hardware Specifications
Intel Core Ultra 7 165H
AMD Radeon 8060S
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 7 165H + AMD Radeon 8060S in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 61.0 |
| 3840x2160 | Medium | 49.0 |
| 3840x2160 | High | 38.0 |
| 3840x2160 | Ultra | 29.0 |
| 2560x1440 | Low | 110.0 |
| 2560x1440 | Medium | 89.0 |
| 2560x1440 | High | 69.0 |
| 2560x1440 | Ultra | 52.0 |
| 1920x1080 | Low | 167.0 |
| 1920x1080 | Medium | 135.0 |
| 1920x1080 | High | 104.0 |
| 1920x1080 | Ultra | 79.0 |
Palworld with iUltra 7 165H + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with 8060S + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with iUltra 7 165H + 8060S
Explore FPS benchmarks for other games using this same hardware combination.