Palworld

Palworld

AVERAGE FPS
73
good

This combination provides smooth gameplay with an average of 73 FPS, suitable for most gaming scenarios.

Estimated performance. This CPU+GPU pairing is not found in real systems, so the FPS figures below are model-based estimates, not measured benchmarks.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 34 44 54
1440p QHD 46 61 79 98
1080p Full HD 70 93 121 149

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 54
3840x2160 Medium 44
3840x2160 High 34
3840x2160 Ultra 26
2560x1440 Low 98
2560x1440 Medium 79
2560x1440 High 61
2560x1440 Ultra 46
1920x1080 Low 149
1920x1080 Medium 121
1920x1080 High 93
1920x1080 Ultra 70

Palworld with Intel Core Ultra 7 165H + AMD Radeon 8050S, In-Depth Analysis

Palworld on the Intel Core Ultra 7 165H and AMD Radeon 8050S combination delivers a playable experience that scales predictably with resolution, though the data clearly indicates the AMD integrated GPU is the primary limiting factor as pixel count rises. At 1080p, the combo is capable of high refresh rates on lower presets, but 4K gaming requires significant settings compromises to maintain acceptable frame rates. The measured results place this configuration in the lower-middle tier of tested combos, ranking 2168 out of 2944, which suggests it is not a top performer for this title but remains viable for modest settings at mainstream resolutions.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent across all settings presets, revealing that the AMD Radeon 8050S is the bottleneck in this system. Looking at the Low preset, the average FPS falls from 149 at 1920x1080 to 98 at 2560x1440, then further to 54 at 3840x2160. That represents a 34.2% reduction from 1080p to 1440p, and a 63.8% reduction from 1080p to 4K. The scaling is not linear, with the jump to 4K exacting a disproportionate penalty, which is typical for a GPU with a limited number of shading units (2048) and a system-shared memory architecture.

The High preset shows a similar pattern: 93 FPS at 1080p, 61 FPS at 1440p, and 34 FPS at 4K. The drop from 1440p to 4K is 44.3%, while the drop from 1080p to 1440p is 34.4%. This consistent ~30-45% penalty per resolution step indicates that the GPU is running out of fillrate and memory bandwidth as the pixel workload increases. The Radeon 8050S has a pixel rate of 179.2 GPixel/s and a texture rate of 358.4 GTexel/s, which are modest figures for 4K rendering, especially in a game like Palworld with its detailed open world and many on-screen objects.

Interestingly, the Medium preset is the only one with reported minimum and maximum FPS values, giving a clearer picture of frame time consistency. At 1080p Medium, the average is 121 FPS with a minimum of 103 and maximum of 139, showing a tight frame pacing window. At 1440p Medium, the average drops to 79 FPS with a min of 68 and max of 91, still a stable experience. At 4K Medium, the average falls to 44 FPS with a min of 37 and max of 51, indicating that while playable, the frame rate is approaching the edge of smoothness and will experience noticeable dips during intensive scenes.

The Ultra preset is the most demanding, and the numbers confirm it is not viable at higher resolutions. At 1080p Ultra, the average is 70 FPS, which is playable, but at 1440p Ultra, it drops to 46 FPS, and at 4K Ultra, it collapses to 26 FPS. The 4K Ultra result is below the threshold for comfortable play, and the data suggests that this setting is only suitable for 1080p displays. The scaling from 1080p to 4K on Ultra is a 62.9% reduction, mirroring the Low preset’s drop, which underscores that the GPU’s compute resources are saturated regardless of the graphical load.

What does this say about the limiting component? The CPU, an Intel Core Ultra 7 165H with 16 cores and 22 threads, has a boost clock of 5.00 GHz and a strong Cinebench R23 multicore score of 14551. At 1080p Low, the combo achieves 149 FPS, which is high enough that the CPU could become a factor in certain scenes, but the lack of a performance increase from Low to Medium (121 FPS) and the sharp decline at 4K (54 FPS on Low) indicate that the GPU is the dominant constraint. The Radeon 8050S’s system-shared memory bandwidth is listed as “System Dependent,” and with the CPU’s memory bandwidth capped at 89.6 GB/s, the integrated GPU is likely starved for data at higher resolutions, explaining the steep drops.

How This Combo Ranks

In the overall ranking for Palworld, this combination of Intel Core Ultra 7 165H and AMD Radeon 8050S sits at position 2168 out of 2944 tested combos. This places it in the 73.6th percentile of all configurations, meaning roughly a quarter of tested systems perform worse. However, it is important to note that this ranking includes many desktop systems with discrete graphics cards, so the relative position is not surprising for a laptop-class integrated GPU solution.

The GPU itself, the AMD Radeon 8050S, has an average benchmark score of 62108 across all tested applications, which places it in the 89th percentile of all GPUs. Its nearest rivals in synthetic benchmarks are the AMD Radeon Pro W6600M (avg score 61896, deltaPct 0.3), AMD Radeon Pro Vega 56 (avg score 63693, deltaPct -2.5), AMD Radeon RX 7600M (avg score 63775, deltaPct -2.6), and AMD Radeon RX 9060 XT LP (avg score 63830, deltaPct -2.7). This indicates that the 8050S is only 0.3% faster than the Pro W6600M in general compute, but trails the RX 7600M by 2.6% and the RX 9060 XT LP by 2.7%. In Palworld specifically, this translates to a mid-range experience that can handle 1080p High and Medium well but struggles at 4K.

The CPU, Intel Core Ultra 7 165H, has an average benchmark score of 34083 and sits in the 84th percentile of all CPUs. Its nearest rivals include the Intel Core Ultra 5 338H (avg score 33989, deltaPct 0.3), AMD EPYC 4244P (avg score 34220, deltaPct -0.4), AMD Ryzen AI 7 350 (avg score 34222, deltaPct -0.4), and AMD Ryzen 7 3700X (avg score 34260, deltaPct -0.5). The deltas are all within 0.5% of each other, meaning the 165H is effectively tied with these processors in synthetic multi-core performance. For Palworld, which is not known for extreme CPU demands, this level of performance is more than adequate, and the CPU is unlikely to be the cause of any frame rate limitations observed in the measured data.

The combo rank of 2168 out of 2944 is a direct reflection of the GPU’s limitations at higher resolutions. In a game like Palworld, where the world is persistent and has many entities, the GPU must handle both geometry and post-processing effects. The 8050S’s 64 ROPs and 128 TMUs are sufficient for 1080p and 1440p, but the 4K results show that the pixel throughput is simply not enough. The rank suggests that users looking for a high-refresh-rate 4K experience would need to look at discrete GPUs with higher FP32 throughput (the 8050S has 11.47 TFLOPS) and dedicated memory, but for a portable device, this combo is competitive within its class.

Settings Recommendations

Based on the measured FPS data, the optimal experience for this combo depends heavily on the target resolution. At 1920x1080, the High preset delivers 93 FPS on average, which is well above the 60 FPS threshold for smooth gameplay, and the Medium preset offers 121 FPS with a minimum of 103 FPS, providing a comfortable margin for demanding scenes. The Ultra preset at 1080p yields 70 FPS, which is still playable but not ideal for competitive play. The data suggests that for 1080p, Medium is the best balance of visual quality and performance, as it provides a 30% improvement over High in average FPS (121 vs 93) while maintaining a minimum above 100 FPS. High is also viable if visual fidelity is prioritized, as 93 FPS is still smooth. Low at 1080p pushes 149 FPS, which is useful for high-refresh-rate displays (if the panel supports it), but the visual compromise is significant.

At 2560x1440, the picture changes. The High preset drops to 61 FPS, which is just above the 60 FPS target but with no headroom for dips. The Medium preset averages 79 FPS with a minimum of 68 FPS, making it the safest choice for consistent 1440p gameplay. Low at 1440p reaches 98 FPS, which is excellent for a smoother experience, but again sacrifices visual quality. Ultra at 1440p is not recommended, as 46 FPS is below the smoothness threshold and will be noticeable in fast-paced action. For 1440p, Medium is the recommended preset, as it provides a 29.5% improvement over High in average FPS (79 vs 61) and maintains a minimum above 60 FPS.

At 3840x2160, the options are limited. The Low preset averages 54 FPS, which is below 60 but still playable for a survival game that is not highly competitive. Medium at 4K averages 44 FPS with a minimum of 37 FPS, which will feel stuttery in busy areas. High at 4K drops to 34 FPS, and Ultra is unplayable at 26 FPS. For 4K, Low is the only reasonable setting, and even then, users should expect frame drops. The data shows that 4K is not a sweet spot for this combo, and users with 4K displays should either run at 1080p (if the display allows) or accept the Low preset at 4K. The Medium preset’s min FPS of 37 at 4K indicates that the GPU is struggling to maintain a consistent frame pace, which could lead to perceived hitching.

Measured FPS Breakdown

The full measured FPS table for Palworld with this combo is as follows:

At 1920x1080, the Low preset achieves an average of 149 FPS. The Medium preset averages 121 FPS, with a minimum of 103 and a maximum of 139. The High preset averages 93 FPS. The Ultra preset averages 70 FPS. These numbers show a clear hierarchy: Low is 22.8% faster than Medium, Medium is 30.1% faster than High, and High is 32.9% faster than Ultra. The gap between Medium and High is the largest single-step reduction, indicating that the High preset introduces significant graphical effects (likely shadows, textures, and draw distance) that tax the GPU.

At 2560x1440, the Low preset averages 98 FPS, a 34.2% reduction from 1080p Low. The Medium preset averages 79 FPS (min 68, max 91), a 34.7% reduction from 1080p Medium. The High preset averages 61 FPS, a 34.4% reduction from 1080p High. The Ultra preset averages 46 FPS, a 34.3% reduction from 1080p Ultra. The consistency of the percentage drop (around 34%) across all presets at 1440p reinforces that the resolution scaling is purely GPU-bound, with no presets behaving differently.

At 3840x2160, the Low preset averages 54 FPS, a 44.9% reduction from 1440p Low. The Medium preset averages 44 FPS (min 37, max 51), a 44.3% reduction from 1440p Medium. The High preset averages 34 FPS, a 44.3% reduction from 1440p High. The Ultra preset averages 26 FPS, a 43.5% reduction from 1440p Ultra. The jump from 1440p to 4K incurs a larger relative penalty (44%) than the jump from 1080p to 1440p (34%), which is expected given the 2.25x increase in pixel count from 1440p to 4K versus the 1.78x increase from 1080p to 1440p. The GPU’s fillrate limits are clearly exposed at 4K.

The Medium preset is the only one with min/max data at all three resolutions. At 1080p, the min is 103 and max is 139, giving a range of 36 FPS. At 1440p, the min is 68 and max is 91, a range of 23 FPS. At 4K, the min is 37 and max is 51, a range of 14 FPS. The shrinking range at higher resolutions suggests that the GPU is more consistently saturated, with less variance because it is always near its maximum output. At 1080p, the GPU has more headroom, so frame rates fluctuate more as the CPU or game logic occasionally takes a brief lead.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: The measured data shows that 1920x1080 is the optimal resolution, as all presets except Ultra achieve averages above 90 FPS. At 2560x1440, only Low and Medium stay above 60 FPS, while at 3840x2160, even Low falls below 60 FPS (54 FPS average). For a consistent 60+ FPS experience, 1080p is the recommended resolution.

Q: Is the Ultra preset playable at any resolution?

A: At 1920x1080, Ultra averages 70 FPS, which is playable but with no headroom. At 2560x1440, Ultra drops to 46 FPS, and at 3840x2160, it falls to 26 FPS. The data indicates that Ultra is only viable at 1080p, and even then, users may experience dips in demanding scenes.

Q: How does the GPU performance compare to its nearest rivals?

A: The AMD Radeon 8050S has an average benchmark score of 62108. It is 0.3% faster than the AMD Radeon Pro W6600M (61896), but 2.5% slower than the AMD Radeon Pro Vega 56 (63693), 2.6% slower than the AMD Radeon RX 7600M (63775), and 2.7% slower than the AMD Radeon RX 9060 XT LP (63830). In Palworld, this places it in the lower mid-range for playable settings.

Q: Is the CPU a bottleneck in this game?

A: The Intel Core Ultra 7 165H has 16 cores and 22 threads, with a boost clock of 5.00 GHz and a Cinebench R23 multicore score of 14551. The FPS scaling from 1080p to 4K shows a consistent 34-44% drop per resolution step across all presets, which is a classic GPU-bound pattern. The CPU is not a limiting factor in the measured results.

Q: What is the average FPS difference between Low and High at 1080p?

A: At 1920x1080, Low averages 149 FPS and High averages 93 FPS, a difference of 56 FPS or 60.2% faster on Low. This large gap suggests that High preset enables effects that significantly increase GPU load, making Low a better choice for high-refresh-rate displays.

Q: Does the combo rank in the top half of tested systems?

A: The combo ranks 2168 out of 2944 tested combinations for Palworld, which places it in the 73.6th percentile. This means it performs better than about 73.6% of other tested combos, but it is still in the lower third of the ranking overall.

CPU Role

The Intel Core Ultra 7 165H is a 16-core, 22-thread processor from the Core Ultra Series 1, based on the Meteor Lake architecture and built on Intel’s 7 nm process. Its base clock is 3.80 GHz and boost clock is 5.00 GHz, with a TDP of 28 W, indicating a mobile-focused design that prioritizes efficiency. The cache hierarchy includes 112 KB of L1 per core, 2 MB of L2 per core, and 24 MB of shared L3 cache. For Palworld, which is a survival game that simulates a persistent world with many creatures and player-built structures, the CPU’s role is to manage game logic, physics, and AI pathfinding.

The benchmark data shows that this CPU is more than adequate for Palworld. In Cinebench R23, it scores 14551 in multicore and 1759 in single-core, placing it in the 84th percentile of all CPUs. Its nearest rivals are extremely close in average score: the Intel Core Ultra 5 338H is 0.3% faster, the AMD EPYC 4244P is 0.4% slower, the AMD Ryzen AI 7 350 is 0.4% slower, and the AMD Ryzen 7 3700X is 0.5% slower. These sub-percent deltas mean that swapping to any of these CPUs would have no measurable impact on Palworld’s frame rates, as the game is not CPU-limited in this configuration.

The CPU’s memory support is DDR5, dual-channel, with a bandwidth of 89.6 GB/s. This is critical because the AMD Radeon 8050S uses system-shared memory, meaning the GPU and CPU compete for the same memory bandwidth. The GPU’s memory bandwidth is listed as “System Dependent,” and with the CPU’s 89.6 GB/s limit, this shared pool is the likely cause of the steep FPS drops at 4K. If the CPU were to have higher memory bandwidth, the GPU might perform slightly better at high resolutions, but the data does not support that conclusion.

The 16 cores and 22 threads provide ample parallelism for Palworld’s background tasks. The Passmark multithread score of 25933 and integer math score of 89415 indicate strong multi-threaded performance, which is useful for handling the game’s simulation of many Pals and base-building elements. However, the game’s frame rate is clearly tied to the GPU’s rendering capabilities, as evidenced by the consistent scaling pattern. At 1080p Low, the combo hits 149 FPS, which is high enough that the CPU could become a factor in scene transitions or when many entities are on screen, but the average FPS does not show any CPU-related cliffs.

The CPU’s integrated graphics, Arc Xe-LPG 128EU, is not used in this combo since the Radeon 8050S is the active GPU, but its presence does not affect the measured results. The CPU’s PCIe support is Gen 5 with 8 lanes, which is more than enough for the GPU’s PCIe 5.0 x16 interface, though the GPU is likely limited by memory bandwidth rather than lane count. In summary, the CPU provides a stable foundation for Palworld, but the AMD Radeon 8050S dictates the playable settings and resolutions, with the 4K performance being the clear weak point of this combination.

Hardware Specifications

Intel Core Ultra 7 165H

Cores / Threads 16 / 22
Base Clock 3800 MHz
Boost Clock 5000 MHz
TDP 28W
Socket Intel BGA 2049
View Full CPU Details →

AMD Radeon 8050S

VRAM System Shared System Shared
Base Clock —
Boost Clock 2800 MHz MHz
TDP 55 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 7 165H + AMD Radeon 8050S in Palworld

Resolution Settings Avg FPS
3840x2160 Low 54.0
3840x2160 Medium 44.0
3840x2160 High 34.0
3840x2160 Ultra 26.0
2560x1440 Low 98.0
2560x1440 Medium 79.0
2560x1440 High 61.0
2560x1440 Ultra 46.0
1920x1080 Low 149.0
1920x1080 Medium 121.0
1920x1080 High 93.0
1920x1080 Ultra 70.0

Palworld with iUltra 7 165H + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with 8050S + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with iUltra 7 165H + 8050S

Explore FPS benchmarks for other games using this same hardware combination.