Palworld

The Intel Core i7-14700K paired with the AMD Radeon RX 9070 XT delivers a highly capable Palworld experience, with the data showing a clear progression from the demanding 4K Ultra preset to the exceptionally fluid 1080p Low configuration. This combination ranks 902nd out of 3711 tested combos, placing it in the top quarter of all systems, and the measured results reveal a setup that can comfortably handle the game’s survival sandbox across a wide range of visual settings.

FAQ

Q: What is the best resolution for this combo to achieve 60 FPS in Palworld?

A: The data shows that at 4K (3840x2160) with High settings, this combo averages 57 FPS, which is below the 60 FPS target. However, at 4K Medium, it achieves 73 FPS, and at 1440p (2560x1440) High, it reaches 102 FPS. Therefore, 1440p High is the highest resolution/setting combination that comfortably exceeds 60 FPS, while 4K Medium also provides a playable experience above that threshold.

Q: How much of a performance drop occurs when moving from 1080p to 4K?

A: At High settings, the average FPS falls from 155 at 1920x1080 to 102 at 2560x1440, and finally to 57 at 3840x2160. This represents a substantial decline of approximately 63% from 1080p to 4K, indicating that the GPU becomes increasingly stressed as pixel count rises.

Q: What are the minimum FPS numbers for this combo?

A: Minimum FPS data is only provided for Medium settings across all resolutions. At 1080p Medium, the minimum is 171 FPS; at 1440p Medium, it is 113 FPS; and at 4K Medium, it drops to 62 FPS. These figures show that even the lowest recorded frame rates at Medium settings remain above 60 FPS for all tested resolutions.

Q: How does the CPU’s multi-core performance compare to its nearest rival?

A: The Core i7-14700K has an average benchmark score of 69355, which is 0.2% lower than the AMD Ryzen 9 7950X’s score of 69515. It also trails the AMD Ryzen 9 7940HX by 0.7% and the AMD Ryzen 7 9700F by 0.9%, while essentially matching the AMD EPYC 9115 with a 0.1% difference.

Q: What is the GPU’s memory configuration and how does it affect the game?

A: The Radeon RX 9070 XT features 16 GB of GDDR6 memory on a 256-bit bus, providing 644.6 GB/s of bandwidth. This large memory pool is sufficient for Palworld’s open-world environments, and the bandwidth supports the smooth frame rates observed at 1080p and 1440p without any obvious memory-related bottlenecks.

Q: Does the data include performance for Ultra settings at all resolutions?

A: Yes, the measured FPS includes Ultra settings for 1080p (117 FPS), 1440p (77 FPS), and 4K (43 FPS). These results show that Ultra is only viable at 1080p for a 60+ FPS experience, as 1440p falls below that threshold and 4K becomes unplayable.

GPU Role

The AMD Radeon RX 9070 XT is the primary driver of Palworld’s frame rate, and its specifications explain the performance scaling seen across resolutions. The GPU operates with a base clock of 1660 MHz, a game clock of 2400 MHz, and a boost clock of 2970 MHz, which are the frequencies that dictate its raw throughput during gameplay. The data shows that this card has a percentile rank of 55 among all GPUs, with an average benchmark score of 13543, placing it in the mid-range of the GPU landscape.

The 16 GB of GDDR6 memory is a standout feature for a survival game like Palworld, which features sprawling maps with many dynamic objects. With a memory bus of 256 bits and a bandwidth of 644.6 GB/s, the GPU can feed its 4096 shading units and 128 ROPs efficiently. This is reflected in the measured results: at 1080p, the GPU is not the limiting factor, as even Ultra settings hit 117 FPS. However, at 4K, the pixel workload becomes immense, and the GPU’s 48.66 TFLOPS of FP32 compute is taxed heavily, leading to a drop to 57 FPS at High and 43 FPS at Ultra.

The GPU’s 64 ray tracing cores are present, but Palworld does not heavily utilize ray tracing in its default presets, so the RDNA 4.0 architecture’s rasterization strength is what drives these numbers. The boost clock of 2970 MHz is particularly relevant, as sustained boost behavior under load determines whether the card can maintain the observed average FPS. The data indicates that the GPU has enough headroom at 1080p and 1440p to keep frame rates high, but at 4K, the sheer number of pixels overwhelms the card, suggesting that the RX 9070 XT is optimized for high-refresh 1440p play rather than 4K Ultra in this title.

Settings Recommendations

Based on the measured FPS data, the optimal experience for this combo depends on the target resolution. At 1080p, the Ultra preset delivers 117 FPS, which is above the 60 FPS threshold and provides the best visual fidelity while remaining fluid. For players who prioritize maximum smoothness, the High preset at 1080p offers 155 FPS, a significant boost over Ultra, but the visual difference may not justify the frame rate advantage for most users.

At 1440p, the High preset is the clear sweet spot, achieving 102 FPS. The Medium preset at 132 FPS is also viable, but High provides a better balance of image quality and performance. The Ultra preset at 1440p drops to 77 FPS, which is still playable but begins to sacrifice the high-refresh advantage. For 4K, the Medium preset is the only sensible choice, as it achieves 73 FPS, while High drops to 57 FPS and Ultra falls to 43 FPS, both of which are below the 60 FPS target. Low settings at 4K reach 91 FPS, but the visual compromise is substantial, so Medium offers the best trade-off for a 4K experience.

Across all resolutions, the data suggests that Medium is the most consistent preset for maintaining a playable frame rate, as it never drops below 62 FPS even at 4K. However, for the best overall experience, 1440p High is recommended for this hardware, as it provides a high-quality image with frame rates well above 100 FPS, leaving headroom for demanding scenes.

Measured FPS Breakdown

The measured data provides a comprehensive view of performance across three resolutions and four settings. At 1920x1080, the Low preset achieves an average of 248 FPS, which is the highest recorded score. The Medium preset follows at 201 FPS, with minimums of 171 FPS and maximums of 231 FPS. High settings produce 155 FPS, and Ultra drops to 117 FPS. These numbers indicate that at 1080p, the CPU and GPU combination is not stressed, and even the most demanding preset maintains a frame rate that exceeds most high-refresh monitors.

Moving to 2560x1440, the Low preset reaches 163 FPS, while Medium averages 132 FPS with a minimum of 113 FPS and a maximum of 152 FPS. High settings deliver 102 FPS, and Ultra falls to 77 FPS. The performance drop from 1080p to 1440p is significant, but all settings remain above 60 FPS, confirming that this resolution is well within the hardware’s capabilities.

At 3840x2160, the Low preset averages 91 FPS, which is a remarkable figure for 4K. Medium settings achieve 73 FPS, with a minimum of 62 FPS and a maximum of 84 FPS. High settings drop to 57 FPS, and Ultra falls to 43 FPS. The 4K results show a clear divide: Medium and Low are playable, while High and Ultra are not suitable for a smooth experience. The minimum FPS data for 4K Medium is particularly telling, as 62 FPS is just above the 60 FPS threshold, indicating that this preset is the boundary for playable 4K performance.

Resolution Scaling

The scaling from 1080p to 4K reveals a significant GPU bottleneck at higher resolutions. At High settings, the frame rate drops from 155 FPS at 1080p to 102 FPS at 1440p, a 34% reduction, and then to 57 FPS at 4K, a further 44% reduction from 1440p. This steep decline suggests that the RX 9070 XT is the limiting component as pixel count increases, as the CPU’s performance remains constant across resolutions.

At Low settings, the drop is less severe but still pronounced: 248 FPS at 1080p, 163 FPS at 1440p, and 91 FPS at 4K. This represents a 63% total reduction from 1080p to 4K, which is consistent with the pixel count increase from 2.07 million to 8.29 million. The scaling is roughly linear with pixel count, indicating that the GPU is fully utilized and there is no other bottleneck in the system.

The Ultra settings show the most dramatic drop, from 117 FPS at 1080p to 77 FPS at 1440p and 43 FPS at 4K. The 4K Ultra result is particularly low, suggesting that the GPU’s 16 GB of memory and 644.6 GB/s bandwidth are insufficient for the highest fidelity at this resolution. The data implies that for 4K play, the user must significantly reduce settings to stay above 60 FPS, and even then, the margin is thin at Medium. This pattern confirms that the RX 9070 XT is best suited for 1440p gaming, where it can maintain high frame rates with most presets.

CPU Role

The Intel Core i7-14700K is a 20-core, 28-thread processor with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. Its multi-core performance is strong, as evidenced by a Cinebench R23 multi-core score of 33440.5 and a Geekbench multi-core score of 20767. The CPU’s role in Palworld is to handle game logic, world simulation, and physics, which are often single-threaded or lightly threaded tasks.

The data shows that the CPU is not a bottleneck in this combination, as the frame rates at 1080p are exceptionally high. At 1080p Low, the 248 FPS average indicates that the CPU can feed the GPU with enough data to reach extreme frame rates. The single-core performance, with a Cinebench R23 single-core score of 2160 and a Geekbench single-core score of 2569, is sufficient for Palworld’s main thread, which typically limits performance in sandbox games.

However, the 20 cores and 28 threads provide ample headroom for background tasks and the game’s AI-driven creatures. The L3 cache of 33 MB is shared across all cores, which helps with data locality in open-world environments. The CPU’s 94th percentile rank among all CPUs, with an average benchmark score of 69355, places it well above the majority of processors, and its nearest rivals are all high-end AMD parts. The data suggests that the i7-14700K has no trouble keeping up with the RX 9070 XT, as the GPU becomes the limiting factor at higher resolutions, not the CPU.

How This Combo Ranks

This specific combination of the Intel Core i7-14700K and AMD Radeon RX 9070 XT ranks 902nd out of 3711 tested combos in Palworld. This places the system in the 75.7th percentile, meaning it outperforms roughly three-quarters of all tested configurations. The rank reflects the balance between the CPU and GPU, with the CPU’s high multi-core score complementing the GPU’s mid-range rasterization performance.

Compared to the CPU’s standalone percentile of 94, the combo’s rank of 902 out of 3711 is slightly lower, which is expected because the GPU’s percentile of 55 drags the overall performance down. The GPU’s nearest rivals in terms of average benchmark score are older or lower-tier cards like the AMD Radeon HD 7770M and NVIDIA GeForce GTX 570, which are within 1% of its score. This indicates that the RX 9070 XT’s synthetic benchmark score is not exceptionally high, but its real-world gaming performance in Palworld is much better than those rivals would suggest.

The combo rank of 902 implies that while the CPU is a top-tier part, the GPU limits the system’s overall standing in this game. The data shows that if the GPU were stronger, the combo would rank higher, but as it stands, this configuration is solidly in the upper-middle tier of Palworld systems. The high FPS at 1080p and 1440p demonstrates that the combo is well-suited for competitive or high-refresh play, while the 4K performance is adequate for Medium settings but not for Ultra. Overall, this rank reflects a system that is well above average for Palworld, capable of delivering a smooth experience at most settings, with the caveat that 4K Ultra is not feasible.