Palworld
This combination provides smooth gameplay with an average of 109 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 52 | 65 | 80 |
| 1440p QHD | 70 | 89 | 118 | 148 |
| 1080p Full HD | 109 | 138 | 182 | 223 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with Intel Core i7-14700K + AMD Radeon RX 7800 XT, In-Depth Analysis
Palworld with the Intel Core i7-14700K and AMD Radeon RX 7800 XT presents a clear performance curve that scales predictably with resolution and settings. This pairing sits in the 629th spot out of 1718 tested combinations, placing it in the upper-middle tier of systems measured for this survival title. The data shows a platform that can handle 1080p and 1440p gaming with high refresh rates, while 4K demands more careful settings choices to stay fluid.
Resolution Scaling
The FPS drop from 1080p to 4K is steep and tells a familiar story about where the bottleneck sits in this combo. At High settings, the average frame rate falls from 137.5 FPS at 1920x1080 to 89.4 FPS at 2560x1440, then further down to 52 FPS at 3840x2160. That is a 62% reduction from 1080p to 4K, which strongly indicates the GPU becomes the limiting factor as pixel count rises. The CPU has headroom to spare at lower resolutions, but the RX 7800 XT cannot keep pace with the 4K workload.
The scaling pattern is consistent across all settings presets. At Low settings, the jump from 222.6 FPS at 1080p to 148.2 FPS at 1440p represents a 33% drop, and then 4K Low lands at 80.3 FPS — a further 46% reduction. Ultra settings show the most dramatic falloff: 108.7 FPS at 1080p, 69.9 FPS at 1440p, and 39.8 FPS at 4K. The gap between Low and Ultra widens as resolution increases, which is typical for a GPU-bound scenario. At 1080p Low, the system is likely CPU-limited or hitting engine limits, but at 4K Ultra, the GPU is clearly the wall.
What this means for practical use: 1080p and 1440p are the sweet spots for this combo. The 4K numbers are playable at Medium and Low, but High and Ultra drop below the 60 FPS threshold that most builders target for smooth action. The resolution scaling data suggests that if you own a 4K monitor, you will be making trade-offs in visual quality to maintain acceptable frame rates.
GPU Role
The RX 7800 XT brings 16 GB of GDDR6 memory on a 256-bit bus, delivering 624.1 GB/s of bandwidth. That memory capacity is generous for Palworld, which is not known for extreme VRAM consumption, but it does provide headroom for texture-heavy mods or future updates. The GPU clocks are set at 1295 MHz base, 2124 MHz game, and 2430 MHz boost, with a 263 W TDP that requires a 600 W power supply and two 8-pin connectors.
The GPU’s benchmark scores put it in the 76th percentile among all graphics cards, with an average score of 32619. Its nearest rivals are within a narrow band: the AMD FirePro S9300 X2 scores 32540 (0.2% slower), while the NVIDIA P104-100 scores 32747 (0.4% faster). This tells you the RX 7800 XT sits right at a performance plateau where small architectural differences matter more than raw compute power.
In Palworld specifically, the GPU’s role becomes dominant at higher resolutions. The measured FPS shows a 1.73x improvement from 4K High to 1080p High (52 vs 137.5 FPS), which aligns with the pixel count difference. The GPU is also the reason Ultra settings hurt so much: 39.8 FPS at 4K Ultra versus 108.7 FPS at 1080p Ultra shows the card is working at its limits when both resolution and quality are maxed. The 16 GB VRAM does not appear to be a constraint in these measurements, as the FPS drops track resolution scaling rather than sudden stutters or memory-related dips.
How This Combo Ranks
The combo rank of 629 out of 1718 places this system in the 63rd percentile of all tested configurations for Palworld. That is respectable but not elite — it means roughly two-thirds of tested combos perform worse, but a solid chunk performs better. The CPU itself is a strong contributor: the Core i7-14700K sits in the 96th percentile among all processors, with an average benchmark score of 70074. Its nearest rivals are the Intel Core i7-14700KF at 70104 (0% delta), the AMD EPYC 9115 at 69887 (0.3% slower), and the AMD Ryzen 9 9950X at 70420 (0.5% faster).
The CPU’s 20 cores and 28 threads, with a 5.60 GHz boost clock, provide ample processing power for Palworld’s simulation-heavy gameplay. The GPU, however, pulls the combo rank down. At the 76th GPU percentile, the RX 7800 XT is a mid-to-upper tier card, but not a flagship. The combination of a top-tier CPU with a mid-high GPU creates a system that excels at 1440p but cannot push 4K Ultra without compromise.
The rank data suggests that if you are building for Palworld specifically, this combo is balanced for high-refresh 1440p gaming. It is not the absolute best pairing, but it is well above average. The 629th rank out of 1718 means you are getting better performance than most systems tested, while the CPU’s high percentile indicates there is still upgrade potential in the GPU slot if you ever want more 4K capability.
Measured FPS Breakdown
At 1920x1080, the system delivers strong results across all presets. Low settings average 222.6 FPS, which is excellent for competitive play or high-refresh monitors. Medium settings drop to 181.5 FPS, still very smooth. High settings average 137.5 FPS, and Ultra brings it down to 108.7 FPS. All 1080p presets exceed the 100 FPS mark, showing that this combo has no trouble at this resolution regardless of quality level.
Moving to 2560x1440, the numbers remain playable but start to show the GPU’s limits. Low settings average 148.2 FPS, Medium hits 118.3 FPS, and High sits at 89.4 FPS. Ultra drops to 69.9 FPS, which is still playable but noticeably less smooth than the lower presets. The drop from Low to Ultra at 1440p is 53%, which is a significant visual quality versus performance trade-off.
At 3840x2160, the story changes. Low settings average 80.3 FPS, which is playable. Medium averages 64.5 FPS, still acceptable for most players. High drops to 52 FPS, which is borderline for action games. Ultra averages 39.8 FPS, which is likely too choppy for smooth gameplay. The 4K results show a clear pattern: stick to Low or Medium for a playable experience, and avoid Ultra unless you are okay with sub-40 FPS.
Settings Recommendations
For a 1080p monitor, Ultra is the best choice. The 108.7 FPS average is well above the 60 FPS threshold, and the visual quality improvement over High is worth the 21% performance hit. If you have a 144Hz or higher refresh monitor, High at 137.5 FPS or Medium at 181.5 FPS will make better use of the display’s capabilities.
For a 1440p monitor, High is the sweet spot. The 89.4 FPS average is smooth and the visual quality is strong. Medium at 118.3 FPS is a good alternative if you prioritize frame rate over fidelity. Ultra at 69.9 FPS is acceptable but not ideal for fast-paced action. Low at 148.2 FPS is only for competitive play where every frame matters.
For a 4K monitor, Medium is the recommended preset. The 64.5 FPS average is close enough to 60 FPS to feel smooth, and the visual quality is a reasonable compromise. Low at 80.3 FPS offers a more comfortable margin above 60 FPS, but the visual downgrade is noticeable. High at 52 FPS and Ultra at 39.8 FPS are both below the playable threshold for most users.
FAQ
Q: Is this combo good for 4K gaming in Palworld?
A: It is playable but limited. Medium settings average 64.5 FPS, and Low averages 80.3 FPS. High and Ultra drop to 52 FPS and 39.8 FPS respectively, which are below the 60 FPS threshold for smooth gameplay.
Q: What is the best resolution for this system?
A: 2560x1440 offers the best balance. High settings average 89.4 FPS, which is smooth and visually detailed. 1080p is faster but wastes some GPU capability, while 4K requires significant quality compromises.
Q: How does the CPU compare to its closest rivals?
A: The Core i7-14700K scores 70074 on average, which is 0% different from the i7-14700KF, 0.3% faster than the EPYC 9115, and 0.5% slower than the Ryzen 9 9950X. It sits in the 96th percentile of all CPUs.
Q: Does the 16 GB VRAM make a difference in Palworld?
A: The measured data does not show VRAM-related stutters or dips. The FPS scales consistently with resolution, suggesting 16 GB is sufficient for this game at all tested settings.
Q: What settings should I use for competitive play?
A: At 1080p Low, the system averages 222.6 FPS, which is ideal for high-refresh competitive play. At 1440p Low, it averages 148.2 FPS, still excellent for fast-paced action.
Q: How does this combo rank among all tested systems?
A: It ranks 629th out of 1718 tested combos for Palworld, placing it in the upper-middle tier. The CPU is in the 96th percentile, while the GPU is in the 76th percentile, making the GPU the limiting factor for top-tier performance.
Hardware Specifications
Intel Core i7-14700K
AMD Radeon RX 7800 XT
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700K + AMD Radeon RX 7800 XT in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 80.3 |
| 3840x2160 | Medium | 64.5 |
| 3840x2160 | High | 52.0 |
| 3840x2160 | Ultra | 39.8 |
| 2560x1440 | Low | 148.2 |
| 2560x1440 | Medium | 118.3 |
| 2560x1440 | High | 89.4 |
| 2560x1440 | Ultra | 69.9 |
| 1920x1080 | Low | 222.6 |
| 1920x1080 | Medium | 181.5 |
| 1920x1080 | High | 137.5 |
| 1920x1080 | Ultra | 108.7 |
Palworld with ii7-14700K + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RX 7800 XT + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with ii7-14700K + RX 7800 XT
Explore FPS benchmarks for other games using this same hardware combination.