Palworld

The AMD Ryzen 7 9700F and NVIDIA GeForce RTX 5070 combination delivers a highly capable Palworld experience, with performance scaling predictably across resolutions and settings. The data shows a system that is well-balanced for high-refresh-rate 1080p and 1440p play, while still managing to hold its own at 4K with the right settings.

Resolution Scaling

The measured FPS data reveals a clear and consistent pattern of performance degradation as resolution increases, which is typical for a GPU-bound title like Palworld. At 1080p with High settings, the combo produces an average of 165 FPS. Moving to 1440p drops that average to 109 FPS, a 34% reduction. Pushing further to 4K results in a 60 FPS average, which is a 45% drop from the 1440p figure and a 64% drop from the 1080p baseline.

This scaling behavior indicates that the RTX 5070 is the primary limiting factor as resolution climbs. The gap between 1080p and 1440p is significant, but the jump to 4K is the most punishing, cutting the frame rate by more than half compared to 1080p. The 12 GB of GDDR7 memory and 672.0 GB/s of bandwidth are sufficient to feed the GPU, but the sheer pixel count at 3840x2160 demands more from the rendering pipeline than at lower resolutions.

The pattern holds across all settings presets. At Low settings, the combo achieves 265 FPS at 1080p, 175 FPS at 1440p, and 97 FPS at 4K. The percentage drops are 34% and 45% respectively, mirroring the High settings scaling almost exactly. This consistency suggests that the resolution scaling is primarily a function of the GPU's fill rate and pixel throughput, not a sudden bottleneck shift between settings.

For Ultra settings, the story is similar but with lower absolute numbers. The combo produces 125 FPS at 1080p, 83 FPS at 1440p (a 34% drop), and 46 FPS at 4K (a 45% drop from 1440p). The fact that these percentage deltas remain constant across all settings reinforces that resolution is the dominant variable, and the CPU is not introducing a variable constraint.

The implication for a builder is straightforward: this system is excellent for 1080p and 1440p gaming, with headroom to spare for high-refresh monitors. At 4K, the experience is playable but requires dropping from Ultra to High or Medium to maintain a smooth 60 FPS baseline. The 4K Low preset at 97 FPS shows that the GPU has headroom when pixel shading demands are reduced.

How This Combo Ranks

Within the comprehensive database of tested combinations, this pairing of the Ryzen 7 9700F and RTX 5070 sits at rank 568 out of 2944 total combos for Palworld. That places it in the top 19% of all tested systems, a strong showing that reflects the hardware's capability in this specific title.

The ranking is notable given the individual components' percentile scores. The CPU holds a 94th percentile ranking against all CPUs in the database, while the GPU sits at the 82nd percentile against all GPUs. The combo's overall rank of 568 suggests that Palworld is not uniquely punishing to either component, and the system performs roughly in line with what the individual parts would suggest.

The GPU's nearest rivals in the benchmark database include the AMD Radeon Pro 580, which scores 0.1% higher on average, and the AMD Radeon Pro WX 7100, which is 0.8% higher. This puts the RTX 5070 in a tight cluster of professional-grade cards that are not typically associated with gaming, making the Palworld results a signal of the driver optimizations and game-specific performance of the consumer GeForce card.

On the CPU side, the Ryzen 7 9700F's nearest rivals are more relevant to gaming. The Intel Core i7-14700KF scores 0.2% higher on average, while the AMD Ryzen 9 7940HX is 0.2% lower. These are all high-end desktop and mobile parts, and the 9700F's position among them indicates it is not holding back the GPU in this test scenario.

The rank of 568 out of 2944 is a strong endorsement for this specific pairing. It suggests that the Ryzen 7 9700F provides enough throughput to keep the RTX 5070 fed in Palworld, and that neither component is a weak link that drags the system down the leaderboard.

GPU Role

The NVIDIA GeForce RTX 5070 is the workhorse of this combination, and its specifications align well with the measured performance. The GPU is built on the Blackwell 2.0 architecture using a 5 nm process at TSMC, with 31,100 million transistors packed into a 263 mm² die. The 12 GB of GDDR7 memory on a 192-bit bus provides 672.0 GB/s of bandwidth, which is a key metric for a game like Palworld that features large open-world environments and many simultaneous entities.

The clock speeds are set at a base of 2325 MHz with a boost of 2512 MHz. These are modest boost clocks compared to some other cards in the market, but the architecture's efficiency allows it to deliver strong performance. The GPU's fp32 compute is rated at 30.87 TFLOPS, which is a healthy figure for rasterization-heavy workloads.

The measured FPS data shows the GPU scaling well with settings. At 1080p, the jump from Low to Medium is a 19% reduction in FPS (from 265 to 215), while the jump from Medium to High is a 23% reduction (from 215 to 165). The jump from High to Ultra is a 24% reduction (from 165 to 125). This pattern of roughly 20-25% degradation per settings tier is consistent and predictable.

At 4K, the GPU's workload is significantly heavier. The 60 FPS average on High settings is exactly at the threshold for smooth console-like play, and the 46 FPS on Ultra shows that the card is pushed to its limits. The 12 GB VRAM is not a limiting factor here, as even at 4K Ultra, the game's textures can be accommodated within the memory pool.

The GPU's 82nd percentile ranking against all GPUs is reflected in its Palworld performance. It is not a top-tier card, but it is well above average, and the measured results show it handling this title with authority at mainstream resolutions. The RTX 5070's role in this combo is clearly to provide high frame rates at 1080p and 1440p, with playable 4K performance reserved for High settings or lower.

Settings Recommendations

Based on the measured FPS data, the optimal settings preset depends heavily on the target resolution and refresh rate. The data shows a clear hierarchy: Low, Medium, High, and Ultra, with each tier costing about 20-25% of the previous tier's frame rate.

For 1080p gaming, the High preset at 165 FPS is the sweet spot. It delivers a frame rate that exceeds the refresh rate of most standard 144Hz monitors, and the visual quality improvement over Medium (215 FPS) is substantial. The Ultra preset at 125 FPS is also viable for 144Hz displays, but the 40 FPS cost over High is significant for the visual gains it provides. If a player has a 240Hz monitor, the Low preset at 265 FPS is the only option that can fully saturate that refresh rate, but the visual fidelity will suffer.

For 1440p, the High preset at 109 FPS is the recommended choice for most players. It provides a smooth experience on 100Hz or 120Hz monitors without the visual compromises of Medium (141 FPS) or Low (175 FPS). The Ultra preset at 83 FPS is acceptable for 60Hz displays but will not take advantage of higher refresh rate panels. Players with 144Hz 1440p monitors will need to use Medium or Low to get close to that refresh rate.

For 4K, the choice is more constrained. The High preset at 60 FPS is the minimum for a playable experience, and it holds up well for a game like Palworld that is not twitch-reflex dependent. The Medium preset at 79 FPS is a better option if the display supports it, offering a 32% improvement over High with modest visual reductions. The Ultra preset at 46 FPS is not recommended, as it falls below the 60 FPS threshold that most players consider the baseline for smooth play.

The practical advice is to start with High settings at any resolution and adjust based on the specific panel's refresh rate. For 1080p High is nearly ideal, for 1440p High is good but Medium is better for high refresh, and for 4K High is the entry point with Medium as the performance pick.

Measured FPS Breakdown

The complete measured FPS table provides a full picture of the combo's capabilities. At 1920x1080, the system produces an average of 265 FPS on Low, 215 FPS on Medium, 165 FPS on High, and 125 FPS on Ultra. The Medium preset also includes minimum and maximum FPS readings of 183 and 247 respectively, showing a 64 FPS variance during gameplay.

At 2560x1440, the averages are 175 FPS on Low, 141 FPS on Medium, 109 FPS on High, and 83 FPS on Ultra. The Medium preset's minimum and maximum are 120 and 163 FPS, a 43 FPS variance. This tighter variance at 1440p compared to 1080p suggests that the GPU is more consistently loaded at the higher resolution, reducing frame time spikes.

At 3840x2160, the averages drop to 97 FPS on Low, 79 FPS on Medium, 60 FPS on High, and 46 FPS on Ultra. The Medium preset's minimum and maximum are 67 and 90 FPS, a 23 FPS variance. This is the tightest variance of any resolution, indicating that at 4K, the GPU is fully saturated and frame pacing is more uniform.

The data shows that the Medium preset is the only one with measured minimum and maximum values across all resolutions. This suggests that the testing methodology captured a full frame time distribution for Medium, while other presets may have had more stable or less varied results. The Medium preset at 1080p has a minimum of 183 FPS, which still exceeds the High preset's average of 165 FPS, demonstrating the significant headroom in this configuration.

The progression from Low to Ultra at each resolution shows a consistent cost per tier. At 1080p, the deltas are 50, 50, and 40 FPS respectively. At 1440p, the deltas are 34, 32, and 26 FPS. At 4K, the deltas are 18, 19, and 14 FPS. This shows that the absolute FPS cost of each settings tier decreases as resolution increases, but the percentage cost remains similar.

CPU Role

The AMD Ryzen 7 9700F plays a supporting role in this combination, but its specifications are more than adequate for Palworld. The CPU is built on the Zen 5 architecture using a 4 nm process at TSMC, with 8,315 million transistors on a 70.6 mm² die. It has 8 cores and 16 threads, with a base clock of 3.80 GHz and a boost clock of 5.50 GHz.

The CPU's cache hierarchy is substantial, with 80 KB of L1 per core, 1 MB of L2 per core, and 32 MB of shared L3 cache. This is a total of 8 MB of L2 and 32 MB of L3, which is generous for a desktop part and helps with game world data that Palworld frequently accesses. The 65 W TDP is remarkably low for a processor with this level of performance, indicating strong power efficiency from the 4 nm process.

In the PassMark benchmarks, the CPU scores 36,470 in multithread and 4,691 in single-thread. These scores place it at the 94th percentile against all CPUs. The single-thread score is particularly relevant for gaming, as many game engines still rely heavily on a few fast cores. The CPU's nearest rivals include the Intel Core i7-14700KF, which scores 0.2% higher on average, and the AMD Ryzen 9 7940HX, which scores 0.2% lower.

The measured FPS data shows that the CPU is not a bottleneck in Palworld. The consistent 34% drop from 1080p to 1440p across all settings indicates that the GPU is the limiting factor, as the CPU's workload does not change significantly with resolution. If the CPU were constraining performance, we would expect to see smaller FPS differences between resolutions at lower settings, where the GPU has lighter work.

The CPU's memory support for DDR5 with dual-channel configuration and 89.6 GB/s of bandwidth is ample for feeding the 12 GB GDDR7 framebuffer. The PCIe Gen 5 interface with 24 lanes provides more than enough bandwidth for the RTX 5070's PCIe 5.0 x16 connection. The 9700F's performance in the PassMark physics test (2,122) and extended instructions test (33,688) suggests it handles complex game logic and simulation well, which is relevant for Palworld's survival mechanics and creature AI.

The boost clock of 5.50 GHz is high for a desktop CPU, and the unlocked multiplier allows for overclocking headroom if a user wants to extract more performance. However, the measured data indicates that even at stock settings, the CPU is not leaving performance on the table in this game. The 8-core, 16-thread configuration is well-suited to modern game engines that can use multiple threads for asset streaming and physics, and the 32 MB of L3 cache helps keep frequently accessed data close to the cores.