Palworld

Palworld’s measured performance with the Intel Core i7-14700K and NVIDIA GeForce RTX 5070 reveals a system that scales predictably across resolutions, though the character of the bottleneck shifts as pixel count rises. At 1080p, the combination delivers high frame rates that suggest a CPU-leaning workload, while at 4K, the GPU becomes the clear limiting factor. This pairing ranks 372nd out of 1718 tested combos, placing it in the top 22% of all configurations in the database.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep but consistent with modern rendering loads. At High settings, the average FPS falls from 164.6 at 1920x1080 to 110.1 at 2560x1440, then to 62.1 at 3840x2160. That represents a 33% reduction from 1080p to 1440p, and a further 44% drop moving to 4K. The scaling pattern indicates that the RTX 5070’s 12 GB of GDDR7 memory and 192-bit bus are being pushed hard at higher resolutions, while the CPU’s 20 cores and 28 threads have ample headroom.

The Ultra preset shows an even more dramatic scaling curve. At 1080p Ultra, the system averages 125.8 FPS, which drops to 85.2 at 1440p and then to 45.8 at 4K. The 4K Ultra result is particularly telling—it is less than half of the 1080p Ultra figure, suggesting that the GPU is saturated at the highest settings and resolution. Conversely, the Low preset at 1080p reaches 269.2 FPS, which is over four times the 4K Ultra result. This wide spread implies that Palworld’s visual complexity scales heavily with resolution and preset, and that the RTX 5070’s 250 W TDP is fully utilized only at the extreme end.

What is notable is the relative consistency of the scaling between presets. At 1440p, the Medium preset averages 141.1 FPS, which is 80% of the Low preset’s 176.8 FPS. At 4K, Medium hits 77.8 FPS, which is 78% of Low’s 99.1 FPS. This proportional relationship suggests the game’s rendering pipeline is well-balanced, with no single setting causing a disproportionate hit outside of the Ultra preset.

Settings Recommendations

The data points to Medium as the equilibrium preset for this combo. At 1080p Medium, the system delivers 217.4 FPS, which is more than sufficient for high-refresh-rate monitors, while at 1440p Medium it holds 141.1 FPS—smooth for competitive play and visually rich. The jump from Medium to High costs about 25% performance at both 1440p (141.1 to 110.1) and 4K (77.8 to 62.1), which is a meaningful trade-off for marginal visual gains.

Ultra is the outlier. At 4K Ultra, the average FPS of 45.8 falls below the 60 FPS threshold that many consider the baseline for playable performance. Even at 1440p Ultra, the 85.2 FPS average is respectable but not dramatically better than High’s 110.1. For users prioritizing frame rate stability, High at 1440p offers the best balance, delivering 110.1 FPS while staying well above the 4K Ultra result. Low settings, while achieving 269.2 FPS at 1080p, sacrifice too much visual fidelity for a frame rate that exceeds most display refresh rates.

The measured rows suggest that Medium at 1440p is the sweet spot for this hardware, offering 141.1 FPS with moderate visual demands. For those with 4K displays, High at 62.1 FPS is borderline playable, but Medium at 77.8 FPS is safer for maintaining a consistent frame time.

How This Combo Ranks

The combo’s rank of 372 out of 1718 places it in the 78th percentile of all tested combinations, meaning it outperforms the majority of systems in the database. This rank reflects the synergy between the i7-14700K, which sits in the 96th percentile of all CPUs, and the RTX 5070, which ranks in the 83rd percentile of all GPUs. The CPU’s strong single-threaded performance—evidenced by a Cinebench R23 single-core score of 6287—likely prevents it from becoming a bottleneck in Palworld’s open-world survival gameplay, which often relies on physics and AI calculations.

The GPU’s average benchmark score of 41687 aligns closely with its nearest rivals, including the NVIDIA GeForce RTX 3090, which scores 41441 with a deltaPct of 0.6. This indicates the RTX 5070 performs nearly identically to the RTX 3090 in synthetic tests, yet the combo rank suggests the i7-14700K’s 96th percentile CPU status provides an edge in real-world gaming scenarios. The CPU’s nearest rival, the Intel Core i7-14700KF, scores 70104 with a deltaPct of 0, confirming that the K-series variant offers no measurable performance penalty for its integrated graphics.

Measured FPS Breakdown

At 1920x1080, the system delivers a wide range of results: Low averages 269.2 FPS, Medium 217.4, High 164.6, and Ultra 125.8. These figures show a clear linear progression, with each preset step costing roughly 20-25% performance. The 1080p Low result of 269.2 FPS is the highest recorded across all tests, indicating that the CPU is well-equipped to feed the GPU at lower resolutions.

Moving to 2560x1440, the averages are 176.8 for Low, 141.1 for Medium, 110.1 for High, and 85.2 for Ultra. The drop from 1080p to 1440p is consistent across all presets, with an average reduction of about 33%. This suggests the GPU is beginning to take on more of the workload, but the CPU still has headroom to spare.

At 3840x2160, the results are 99.1 for Low, 77.8 for Medium, 62.1 for High, and 45.8 for Ultra. The 4K Ultra figure is the only one below 60 FPS, highlighting the GPU’s limits at maximum settings. The gap between Low and Ultra at 4K is 53.3 FPS, which is narrower than the 143.4 FPS gap at 1080p, further confirming that the GPU is the bottleneck at higher resolutions.

GPU Role

The RTX 5070’s memory configuration is central to its performance in Palworld. With 12 GB of GDDR7 memory on a 192-bit bus, it achieves a bandwidth of 672.0 GB/s. This is substantial for a mid-range card, and the data suggests it is sufficient for 1440p gaming, where the card delivers over 85 FPS even at Ultra settings. At 4K, the bandwidth becomes a limiting factor, particularly at Ultra where the 45.8 FPS average indicates the GPU is struggling to keep up with the memory demands.

The GPU’s boost clock of 2512 MHz and 6144 shading units contribute to its 30.87 TFLOPS of FP32 performance. This raw compute power translates to strong DirectX 12 results, with a 3DMark Steel Nomad score of 5077. The card’s 83rd percentile ranking among all GPUs aligns with its measured performance, though the 4K Ultra result shows that peak compute does not always guarantee playable frame rates in demanding titles.

The GPU’s 48 ray tracing cores and 192 tensor cores are present but not directly measured in the FPS data. However, the substantial drop at 4K Ultra suggests that the card’s 250 W TDP is fully taxed, and the 600 W suggested PSU provides adequate headroom for transient power spikes.

FAQ

Q: What is the best resolution for this combo to maintain 60 FPS?

A: At 4K High, the system averages 62.1 FPS, which barely exceeds 60. For a more comfortable margin, 1440p Ultra averages 85.2 FPS, while 1080p High reaches 164.6 FPS.

Q: How does the RTX 5070 compare to the RTX 3090 in this context?

A: The RTX 5070 has an average benchmark score of 41687, while the RTX 3090 scores 41441 with a deltaPct of 0.6. This indicates near-identical synthetic performance, though the RTX 5070’s newer architecture may offer different real-world characteristics.

Q: Does the CPU limit performance at 1080p?

A: At 1080p Low, the system reaches 269.2 FPS, suggesting the i7-14700K’s 20 cores and 5.60 GHz boost clock are sufficient to avoid bottlenecking the GPU at lower resolutions.

Q: What settings should be avoided for 4K play?

A: The Ultra preset at 3840x2160 averages 45.8 FPS, which is below the 60 FPS threshold. Medium at 4K averages 77.8 FPS, providing a better experience.

Q: How does this combo rank among all tested systems?

A: It ranks 372nd out of 1718 tested combos, placing it in the top 22% of all configurations in the database.

Q: Is the GPU’s 12 GB memory sufficient for Palworld?

A: The 12 GB of GDDR7 memory appears adequate for 1440p, where the card delivers over 85 FPS at Ultra. At 4K Ultra, the 45.8 FPS result suggests memory bandwidth is a limiting factor.

CPU Role

The Intel Core i7-14700K brings 20 cores and 28 threads to the table, with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. Its Cinebench R23 multi-core score of 44534 and single-core score of 6287 place it in the 96th percentile of all CPUs, indicating strong performance in both multi-threaded and single-threaded workloads. This is critical for Palworld, which features a living world with numerous AI-driven creatures and physics calculations.

The CPU’s 33 MB of shared L3 cache and 2 MB per core L2 cache provide ample data for game logic, while its dual-channel memory support for DDR4 and DDR5 allows flexible system configuration. The data shows that the CPU is not the primary bottleneck at any resolution tested—even at 1080p Low, the system achieves 269.2 FPS, which is likely near the game engine’s cap.

The CPU’s nearest rival, the Intel Core i7-14700KF, scores 70104 with a deltaPct of 0, confirming that the integrated UHD Graphics 770 has no impact on gaming performance. The AMD Ryzen 9 9950X scores 70420 with a deltaPct of -0.5, indicating the Intel chip is slightly slower in synthetic benchmarks but still competitive. This CPU’s 125 W TDP is modest for its core count, and its 10 nm process node ensures efficient operation under sustained gaming loads.