Palworld

The AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 3080 pairing delivers a solid Palworld experience, but the data reveals a clear performance hierarchy that depends heavily on your resolution and settings. This combination ranks in the 499th position out of 1718 tested combos, placing it in the upper third of all systems tested. The benchmark results show a system that is capable of high-refresh-rate gaming at 1080p and 1440p, while 4K demands more selective settings choices.

Resolution Scaling

The measured FPS data shows how this combo scales across resolutions, and the pattern is exactly what you would expect from a system where the GPU becomes increasingly dominant as pixel count rises. At 1080p with Low settings, the system pushes an average of 239.5 FPS, which is an extraordinarily high frame rate that suggests the CPU and GPU are both working efficiently without either becoming a severe bottleneck. Moving to 1440p Low, the average drops to 159.9 FPS, a reduction of roughly 33% that reflects the increased pixel workload. At 4K Low, the average falls to 88.6 FPS, which is still very playable but represents a significant step down from the 1080p figure.

The scaling becomes more pronounced at higher settings. At 1080p High, the system achieves 150 FPS average, but at 1440p High, that drops to 94.9 FPS, and at 4K High, it falls to 55.3 FPS. The gap between 1080p and 4K at High settings is about 63%, which indicates that the RTX 3080 is the primary limiting factor at 4K. The Ultra settings tell a similar story: 114.9 FPS at 1080p, 75 FPS at 1440p, and 39.3 FPS at 4K. That 4K Ultra result is below the 60 FPS threshold that most players consider smooth, so you would need to dial back settings to maintain playability at that resolution.

What the scaling data suggests is that at 1080p, the Ryzen 7 5800XT is likely keeping pace with the GPU, but as resolution increases, the GPU workload grows and the CPU becomes less relevant. The 4K results, particularly at High and Ultra settings, show the RTX 3080 hitting its limits, with the frame rate dropping more sharply between 1440p and 4K than between 1080p and 1440p.

How This Combo Ranks

In the Palworld benchmark database, this specific CPU-GPU combination holds the 499th rank out of 1718 tested combos. That places it in the 71st percentile of all systems tested, which is a strong showing for a platform built around the AMD Socket AM4 and the RTX 3080. The ranking suggests that while this is not a top-tier enthusiast setup, it outperforms the majority of combinations that have been benchmarked in this game.

The CPU itself sits at the 86th percentile among all processors tested, with an average benchmark score of 29774. Its nearest rivals show how tightly packed the mid-to-high-end CPU market is. The AMD Ryzen 7 PRO 5755GE scores 29740, which is just 0.1% behind, while the AMD Ryzen 7 6800HS scores 29856, putting it 0.3% ahead. The AMD Ryzen AI 7 PRO 360 trails by 0.3%, and the AMD Ryzen 7 7840H leads by 0.3%. These tiny margins mean that in CPU-bound scenarios, the 5800XT is effectively interchangeable with these alternatives.

The GPU ranks at the 80th percentile among all graphics cards, with an average benchmark score of 35787. Its nearest rivals again show a tight cluster: the AMD Radeon Pro Duo is 0.2% ahead, the AMD Radeon 880M is 0.4% behind, the AMD Radeon RX 7900 GRE leads by 0.9%, and the NVIDIA GeForce RTX 5070 Ti Mobile trails by 1%. The combination of an 86th percentile CPU and an 80th percentile GPU results in a combo rank that is slightly lower than either individual component percentile, which suggests that Palworld is somewhat more sensitive to GPU performance than CPU performance.

FAQ

Q: Can this system run Palworld at 4K smoothly?

A: At 4K High settings, the average FPS is 55.3, which is below the 60 FPS standard. At 4K Medium, it improves to 69.3 FPS, and at 4K Low, it reaches 88.6 FPS. For consistent smoothness at 4K, you would need to use Medium or Low settings, as Ultra settings only produce 39.3 FPS.

Q: What is the best resolution for high refresh rate monitors?

A: At 1080p, the system delivers 150 FPS at High settings and 239.5 FPS at Low settings, making it well-suited for 144Hz or even 240Hz displays. At 1440p, High settings produce 94.9 FPS, which is suitable for a 144Hz monitor if you are willing to accept some frames below the refresh rate.

Q: How does the CPU compare to its closest rivals in benchmark scores?

A: The Ryzen 7 5800XT has an average benchmark score of 29774. The nearest rival, the AMD Ryzen 7 PRO 5755GE, scores 29740, a 0.1% difference. The AMD Ryzen 7 6800HS scores 29856, which is 0.3% higher, and the AMD Ryzen 7 7840H scores 29868, also 0.3% higher.

Q: Is the GPU's performance close to other cards in its class?

A: The RTX 3080 has an average benchmark score of 35787. The AMD Radeon RX 7900 GRE scores 36101, which is 0.9% higher, while the AMD Radeon 880M scores 35646, which is 0.4% lower. The NVIDIA GeForce RTX 5070 Ti Mobile scores 35435, putting it 1% behind.

Q: What frame rate can I expect at 1440p with Ultra settings?

A: The measured average FPS at 1440p Ultra is 75 FPS. This is a playable frame rate for most titles, though you may notice some dips in demanding scenes, as the data does not include minimum FPS figures.

Q: How does the system perform at 1080p Ultra?

A: At 1080p Ultra, the average FPS is 114.9. This is above the 100 FPS mark, which indicates that the combination of the 8-core CPU and the RTX 3080 can handle maxed-out settings at the lowest resolution without significant compromise.

Measured FPS Breakdown

The complete measured FPS data provides a detailed picture of this combo's performance across all tested configurations.

At 1920x1080, the system achieves its highest frame rates. Low settings produce an average of 239.5 FPS, Medium settings produce 192.1 FPS, High settings produce 150 FPS, and Ultra settings produce 114.9 FPS. The progression from Low to Ultra shows a steady decline, with the gap between Low and Ultra being approximately 52%.

At 2560x1440, the averages are 159.9 FPS at Low, 129.3 FPS at Medium, 94.9 FPS at High, and 75 FPS at Ultra. The drop from 1080p to 1440p is most pronounced at Low settings, where the FPS falls by 33.2%, while the drop at Ultra settings is 34.7%. This consistency suggests that the GPU is scaling predictably with resolution.

At 3840x2160, the system produces 88.6 FPS at Low, 69.3 FPS at Medium, 55.3 FPS at High, and 39.3 FPS at Ultra. The gap between 1440p and 4K is significant across all settings, with the Low setting dropping by 44.6% and the Ultra setting dropping by 47.6%. The 4K Ultra result of 39.3 FPS is the only configuration that falls below the 40 FPS mark, indicating that this setting is not viable for smooth gameplay.

The data shows a clear pattern: the system is capable of exceeding 100 FPS at 1080p across all settings, exceeding 75 FPS at 1440p across all settings, and only exceeding 60 FPS at 4K when using Low or Medium settings.

GPU Role

The NVIDIA GeForce RTX 3080 is built on the Ampere architecture using Samsung's 8 nm process, with a die size of 628 mm² and 28,300 million transistors. It operates at a base clock of 1440 MHz and a boost clock of 1710 MHz, with memory running at 1188 MHz (19 Gbps effective). The card has 10 GB of GDDR6X memory on a 320-bit bus, providing a bandwidth of 760.3 GB/s.

The GPU's memory configuration is particularly relevant to Palworld, which is an open-world survival game that can demand substantial video memory at higher resolutions and settings. The 10 GB frame buffer is sufficient for 1080p and 1440p gameplay, but at 4K Ultra, the combination of high-resolution textures and complex geometry may push against this limit. The measured FPS data supports this, as the 4K Ultra result of 39.3 FPS is disproportionately low compared to the 4K High result of 55.3 FPS, suggesting that memory capacity or bandwidth constraints are exacerbating the performance drop at the highest settings.

The RTX 3080's compute capabilities are substantial, with 8704 shading units, 272 TMUs, and 96 ROPs. It also includes 68 RT cores and 272 tensor cores, which are not directly utilized in Palworld's standard rendering but contribute to the card's overall feature set. The FP32 performance of 29.77 TFLOPS and the pixel rate of 164.2 GPixel/s are strong figures that help explain why the card performs so well at lower resolutions, where fill rate and shader throughput are less likely to be bottlenecks.

CPU Role

The AMD Ryzen 7 5800XT is a Zen 3 architecture processor built on TSMC's 7 nm process, with a die size of 74 mm² and 4,150 million transistors. It has 8 cores and 16 threads, with a base clock of 3.80 GHz and a boost clock of 4.80 GHz. The CPU supports DDR4 memory in a dual-channel configuration, providing a memory bandwidth of 51.2 GB/s.

In Palworld, the CPU's role is to handle game logic, world simulation, and AI for the numerous creatures and characters that populate the world. The 8-core, 16-thread configuration is well-suited to this task, as the game can utilize multiple threads for various subsystems. The benchmark results show that the CPU is not a limiting factor at 1080p, where the system achieves 239.5 FPS at Low settings, indicating that the CPU can feed the GPU sufficiently at high frame rates.

The CPU's benchmark scores are competitive with its nearest rivals. In Cinebench R23, it scores 23794 in multicore and 3359 in singlecore. The single-thread performance is particularly important for Palworld, as the game's main loop may have serial dependencies that benefit from high clock speeds. The boost clock of 4.80 GHz is among the highest for the Ryzen 5000 series, which helps maintain high FPS in CPU-bound scenarios.

The Ryzen 7 5800XT has a TDP of 105 W and uses the AMD Socket AM4 platform, which means it can be paired with a wide range of existing motherboards. The CPU's percentile ranking of 86% among all processors indicates that it is a strong performer, though its nearest rivals show that the market has moved on with newer architectures that offer similar or slightly better performance. The 3dmark scores show a clear scaling from 1879 at 2 threads to 7683 at 16 threads, which indicates good multi-threading efficiency that Palworld can leverage during complex in-game events.