Palworld
This combination provides smooth gameplay with an average of 94 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 35 | 40 | 54 | 72 |
| 1440p QHD | 61 | 81 | 102 | 125 |
| 1080p Full HD | 91 | 120 | 153 | 189 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with AMD Ryzen 7 5800XT + AMD Radeon RX 6750 XT, In-Depth Analysis
The AMD Ryzen 7 5800XT paired with the AMD Radeon RX 6750 XT delivers a highly playable Palworld experience across most settings, but the data reveals a clear performance hierarchy driven by resolution and preset selection. The measured results show a system that is decisively GPU-limited at higher resolutions, while the robust 8-core processor ensures headroom at lower settings. This analysis breaks down the measured FPS, scaling behavior, and the role each component plays in shaping the final numbers.
Resolution Scaling
The measured FPS data shows a steep performance gradient as resolution increases, confirming that the Radeon RX 6750 XT is the primary limiting factor in Palworld. At 1080p High, the combo achieves 120.2 FPS, which drops to 80.7 FPS at 1440p and further to 40.4 FPS at 4K. That represents a 66% performance loss from 1080p to 4K at High settings, a scaling pattern typical of a GPU-bound scenario where pixel throughput becomes the bottleneck.
The scaling is slightly less punishing at Low settings, where 1080p yields 189 FPS, 1440p drops to 124.9 FPS, and 4K falls to 71.6 FPS. The percentage drop from 1080p to 4K at Low is 62%, which is marginally better than High, but still substantial. Interestingly, the gap between Low and High at 4K is 31.2 FPS (71.6 vs 40.4), whereas at 1080p the gap is 68.8 FPS (189 vs 120.2). This suggests that at 4K, the GPU is so saturated that even reducing settings cannot fully compensate for the pixel load.
Ultra settings expose the most severe scaling, with 91.3 FPS at 1080p crumbling to 34.8 FPS at 4K — a 62% reduction. The data implies that Palworld's higher presets introduce shading and texture costs that disproportionately impact the GPU at higher resolutions. For users targeting 4K, the measured numbers indicate that only Low settings approach playability, while 1440p and 1080p offer much more flexibility across the preset range.
Settings Recommendations
The measured rows provide a clear picture of which preset offers the best balance between visual fidelity and frame rate. At 1080p, High settings at 120.2 FPS is the sweet spot, delivering a smooth experience well above the 60 FPS threshold while preserving quality. The jump from High to Ultra costs 28.9 FPS (120.2 to 91.3), which is a significant penalty for marginal visual gains. Medium at 153.2 FPS is viable for competitive play, but High remains the recommended choice for most users at this resolution.
At 1440p, High settings at 80.7 FPS is still comfortably playable, though users with high-refresh monitors might prefer Medium at 102 FPS. Ultra at 61.2 FPS is borderline, dipping close to the 60 FPS line, so High is the safer bet. Low at 124.9 FPS is unnecessary unless chasing maximum frame rates. The 1440p data suggests that High is the optimal preset, as it maintains fluidity without sacrificing too much detail.
4K presents a tougher choice. High at 40.4 FPS and Ultra at 34.8 FPS are both below the playability threshold, while Medium at 54.3 FPS is marginal. Low at 71.6 FPS is the only preset that delivers a consistently smooth experience. The data strongly recommends Low for 4K gaming with this combo, as even Medium risks noticeable stutter in demanding scenes. For the best experience per the measured rows, High at 1080p or 1440p, and Low at 4K, are the standout choices.
GPU Role
The Radeon RX 6750 XT's specifications align directly with the measured performance patterns. With 12 GB of GDDR6 memory on a 192-bit bus delivering 432.0 GB/s of bandwidth, the card has ample capacity for Palworld's textures at 1080p and 1440p, but the 4K results suggest memory bandwidth becomes a constraint at higher pixel counts. The boost clock of 2600 MHz and game clock of 2495 MHz are relatively high, yet the data shows that raw compute throughput — rated at 13.31 TFLOPS FP32 — is the limiting factor at 4K.
The GPU's 2560 shading units and 160 texture mapping units are sufficient for 1080p Ultra at 91.3 FPS, but the 64 ROPs appear to bottleneck at 4K, where pixel throughput demands more rasterization power. The 40 ray tracing cores have no direct impact on these non-RT results, but the card's DirectX 12 Ultimate support ensures compatibility with Palworld's rendering pipeline. The 7 nm process node and 17,200 million transistors indicate a mature design, yet the data shows it trails modern cards in raw performance.
Interestingly, the GPU's percentile rank against all GPUs is 79, and its average benchmark score is 35327. The nearest rival data shows it within 1.3% of the NVIDIA GeForce RTX 3080, which is notable given the 3080's higher power envelope. In Palworld specifically, the measured FPS at 1440p High (80.7) and 1080p Ultra (91.3) demonstrate that the card performs best when shader complexity is moderate, but struggles when resolution scaling amplifies the workload.
Measured FPS Breakdown
At 1920x1080, the combo delivers 189 FPS on Low, 153.2 FPS on Medium, 120.2 FPS on High, and 91.3 FPS on Ultra. These numbers show a smooth degradation curve, with each preset step costing roughly 30 FPS. The 1080p results are uniformly playable, with even Ultra exceeding 90 FPS, making this resolution the most forgiving for the GPU.
At 2560x1440, the data shows 124.9 FPS on Low, 102 FPS on Medium, 80.7 FPS on High, and 61.2 FPS on Ultra. The drop from 1080p to 1440p at each preset is approximately 35-40%, which is consistent with the increased pixel count (1.78x). Ultra at 61.2 FPS is just above the 60 FPS mark, while Low and Medium offer headroom for high-refresh displays.
At 3840x2160, the measured numbers are 71.6 FPS on Low, 54.3 FPS on Medium, 40.4 FPS on High, and 34.8 FPS on Ultra. The 4K results show a stark contrast: only Low achieves acceptable frame rates, and Ultra dips below 35 FPS. The scaling from 1080p to 4K at Ultra is a 62% reduction, which is the steepest drop across all presets. This breakdown confirms that the GPU is the bottleneck at 4K, while the CPU has sufficient headroom to drive higher frame rates at lower resolutions.
How This Combo Ranks
In Palworld, this CPU-GPU combination ranks 834 out of 1718 tested combos, placing it in the upper-middle tier of the database. The median position suggests that while the pair is capable, it does not stand out among more modern or higher-end configurations. The rank reflects the GPU's 79th percentile and the CPU's 86th percentile, indicating that the CPU is relatively stronger than the GPU in this pairing.
The combo's ranking is likely dragged down by the GPU's age — the RX 6750 XT is end-of-life and was released in March 2022 — whereas the CPU, released in July 2024, is newer. The GPU's nearest rivals include the RTX 3080, which scores 1.3% higher on average, and the mobile RTX 5070 Ti Mobile, which scores 0.3% higher. This suggests that in Palworld, the combo performs slightly below the average of its closest competitors, but the differences are small enough to be within run-to-run variance.
For context, the 1718 tested combos span a wide range of hardware, and being in the 48.5th percentile (834/1718) means the system is exactly average for Palworld. Users with this combo should expect frame rates that are typical for mid-range hardware, with the CPU providing solid multi-threaded performance (Cinebench R23 multi-core score of 23794) that prevents it from becoming a bottleneck in most scenarios.
CPU Role
The AMD Ryzen 7 5800XT is a Zen 3 (Vermeer) processor with 8 cores and 16 threads, running at a base clock of 3.80 GHz and boosting to 4.80 GHz. Its Cinebench R23 multi-core score of 23794 and single-core score of 3359 indicate strong performance for a 2024 release. The CPU's percentile rank of 86 against all CPUs is high, and its nearest rivals — such as the Ryzen 7 7840H with a 0.3% higher average score — show it is competitive with newer mobile parts.
In Palworld, the CPU's role is evident in the low-resolution results. At 1080p Low, the combo achieves 189 FPS, which is a strong indicator that the 5800XT can feed the GPU effectively at high frame rates. The 16 threads and 32 MB of L3 cache provide ample headroom for the game's physics and world simulation, which are often CPU-bound in survival titles. The 3DMark 16-thread score of 7683 and max-thread score of 7680 suggest consistent scaling across all cores.
The data shows that at 4K, the CPU's performance becomes less relevant, as the GPU is clearly the limiting factor. However, at 1080p and 1440p, the 5800XT's single-thread performance (3DMark single-thread score of 959) ensures that frame pacing remains consistent. The TDP of 105 W is modest for an 8-core part, allowing sustained boost clocks without thermal throttling. The CPU's DDR4 support and dual-channel memory interface (51.2 GB/s bandwidth) are sufficient for Palworld's memory demands, though newer DDR5 platforms might offer marginal gains.
FAQ
Q: What is the best resolution for this combo in Palworld?
A: The data shows 1080p delivers the highest frame rates across all presets, with High at 120.2 FPS and Ultra at 91.3 FPS. 1440p is also viable with High at 80.7 FPS, but 4K is only playable at Low settings (71.6 FPS).
Q: How does the RX 6750 XT compare to its nearest rival in terms of average score?
A: The RX 6750 XT's average benchmark score is 35327, which is 0.2% higher than the AMD Radeon RX 5600M (35264) and 1.3% lower than the NVIDIA GeForce RTX 3080 (35787).
Q: Is the CPU or GPU the bottleneck at 4K Ultra settings?
A: At 4K Ultra, the combo achieves only 34.8 FPS, and the steep scaling drop from 1080p (91.3 FPS) indicates the GPU is the limiting component. The CPU's high percentile rank (86) and strong multi-core scores suggest it is not the constraint.
Q: What frame rate can users expect at 1440p Medium?
A: The measured data shows 102 FPS at 2560x1440 with Medium settings, which is a good balance between visual quality and smoothness, well above the 60 FPS threshold.
Q: Does the combo's rank in Palworld reflect its overall hardware strength?
A: The combo ranks 834 out of 1718, which is near the median. This is lower than the CPU's 86th percentile rank, suggesting the GPU holds the pair back relative to other tested combos.
Q: What is the CPU's single-thread performance, and why does it matter for Palworld?
A: The Ryzen 7 5800XT scores 3359 in Cinebench R23 single-core and 959 in 3DMark single-thread. Strong single-thread performance is crucial for game logic and draw calls, which helps maintain high frame rates at 1080p (189 FPS on Low).
Hardware Specifications
AMD Ryzen 7 5800XT
AMD Radeon RX 6750 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5800XT + AMD Radeon RX 6750 XT in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 71.6 |
| 3840x2160 | Medium | 54.3 |
| 3840x2160 | High | 40.4 |
| 3840x2160 | Ultra | 34.8 |
| 2560x1440 | Low | 124.9 |
| 2560x1440 | Medium | 102.0 |
| 2560x1440 | High | 80.7 |
| 2560x1440 | Ultra | 61.2 |
| 1920x1080 | Low | 189.0 |
| 1920x1080 | Medium | 153.2 |
| 1920x1080 | High | 120.2 |
| 1920x1080 | Ultra | 91.3 |
Palworld with Ryzen 7 5800XT + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RX 6750 XT + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with Ryzen 7 5800XT + RX 6750 XT
Explore FPS benchmarks for other games using this same hardware combination.