Palworld

Palworld with the AMD Ryzen 5 8400F and NVIDIA GeForce RTX 3070 Ti presents a compelling mid-range pairing for one of the most demanding survival titles of recent years. The data reveals a system that scales predictably across resolutions, with the CPU proving more than capable of feeding the GPU at high frame rates, while the GPU's 8 GB memory buffer becomes the defining constraint at maximum settings.

Resolution Scaling

The transition from 1080p to 4K demonstrates a classic shift in system bottleneck. At 1920x1080 with Low settings, the combination produces an average of 217 FPS, a figure that drops by roughly 32% to 143.8 FPS at 2560x1440, and then falls a further 47% to 76.6 FPS at 3840x2160. This steep decline from 1440p to 4K indicates that the rendering load is scaling heavily with pixel count, placing the GeForce RTX 3070 Ti squarely as the limiting component at higher resolutions.

The 1080p to 1440p transition shows a more moderate drop of 32%, suggesting that the Ryzen 5 8400F still holds up well in feeding the GPU. However, the gap between 1440p and 4K at Low settings narrows the frame rate from a highly playable 143.8 FPS to a still-smooth 76.6 FPS, reinforcing that the GPU’s compute and memory bandwidth are what matter most as resolution climbs.

At High settings, the pattern shifts slightly. The system achieves 132.9 FPS at 1080p, 87.9 FPS at 1440p (a 34% reduction), and 52 FPS at 4K (a 41% reduction from 1440p). The 4K figure drops below the 60 FPS threshold, highlighting that this pairing is better suited for high-refresh 1440p gaming than for 4K at high quality. The Ultra preset further stresses the GPU, with 4K falling to 35.3 FPS, a figure that is only 35% of the 1080p result, indicating that the most demanding settings are primarily GPU-bound.

GPU Role

The RTX 3070 Ti is built on the Ampere architecture with 8 GB of GDDR6X memory across a 256-bit bus, providing a bandwidth of 608.3 GB/s. This memory configuration is central to the performance observed in Palworld. At Ultra settings, the 4K average of 35.3 FPS and the 1440p average of 68.2 FPS suggest that the 8 GB capacity is being saturated, likely causing texture streaming and memory allocation overhead that drags down performance relative to the card’s raw compute capabilities.

The GPU’s boost clock of 1770 MHz and base clock of 1575 MHz, paired with 6144 shading units, provide the raw throughput to handle the game’s voxel-based world. The data shows that at 1080p Low, the system reaches 217 FPS, demonstrating that the GPU can operate at very high frame rates when the load is light. However, the drop to 101 FPS at 1080p Ultra (a 53% reduction from Low) indicates that the card’s 96 ROPs and 192 TMUs are heavily taxed by the increased shading and texture work.

The GPU’s benchmark percentile of 74 versus all GPUs, with an average score of 30849, places it in the upper mid-range tier. Its nearest rivals in benchmark scores include the AMD Radeon RX 6700, which sits 0.8% higher, and the AMD Radeon RX 590 GME at 0.3% lower. These close margins in synthetic tests are not reflected in Palworld’s measured FPS, where the RTX 3070 Ti’s memory bandwidth and driver optimization for DirectX 12 Ultimate likely play a more significant role than raw compute scores.

CPU Role

The AMD Ryzen 5 8400F, a Zen 4 processor on the 4 nm process, brings 6 cores and 12 threads to the table. Its boost clock of 4.70 GHz and base clock of 4.20 GHz provide the single-thread performance necessary for Palworld’s game logic and physics simulation. The chip’s 3DMark single-thread score of 951 and Cinebench R23 single-core score of 2943 indicate strong per-core capability, which is critical given that many survival games rely heavily on one or two primary threads.

In Palworld, the CPU’s role is evident in the scaling from Low to Medium settings at 1080p. The system moves from 217 FPS at Low to 173.5 FPS at Medium, a 20% drop that is less steep than the Low-to-Ultra transition. This suggests that the CPU can maintain high frame rates even as the GPU workload increases, but the 12 threads are not a limiting factor until the GPU becomes fully saturated.

The Ryzen 5 8400F’s 16 MB of shared L3 cache and dual-channel DDR5 memory support with 83.2 GB/s bandwidth help ensure that asset streaming from storage to the GPU does not stall. The processor’s benchmark percentile of 82 versus all CPUs, with an average score of 25064, places it in the top fifth of tested chips. Its nearest rivals include the AMD Ryzen 7 2700X, which scores nearly identically with a 0% delta, and the AMD Ryzen 5 7500F, which is 0.3% higher. This indicates that the 8400F offers comparable synthetic performance to older flagship chips, but its newer architecture likely provides better real-world gaming efficiency in titles like Palworld.

Measured FPS Breakdown

At 1920x1080, the data shows a clear progression across settings. Low yields 217 FPS, Medium 173.5 FPS, High 132.9 FPS, and Ultra 101 FPS. The gap between Low and Medium is 43.5 FPS, while the gap between High and Ultra is 31.9 FPS, suggesting diminishing returns as the GPU nears its limits. These numbers indicate that the system is well-suited for high-refresh-rate monitors at 1080p, with even Ultra settings clearing the 100 FPS mark.

Moving to 2560x1440, the averages are 143.8 FPS at Low, 115.1 FPS at Medium, 87.9 FPS at High, and 68.2 FPS at Ultra. The Medium and High settings both remain above 60 FPS, making 1440p a sweet spot for this combination. The Ultra setting at 68.2 FPS is still playable, but the margin above the 60 FPS threshold is thin, and any demanding in-game scenes could push it lower.

At 3840x2160, the performance drops significantly. Low averages 76.6 FPS, which is still smooth, but Medium falls to 62.3 FPS, High to 52 FPS, and Ultra to 35.3 FPS. The Ultra figure is particularly telling, as it falls below 40 FPS, indicating that 4K gaming requires lowering settings to Medium or Low for a consistent experience. The data shows that the 8 GB VRAM on the RTX 3070 Ti is a bottleneck at 4K Ultra, as the frame rate drops more sharply than would be expected from compute limitations alone.

How This Combo Ranks

Among the 1718 tested combinations in the database, this pairing of the AMD Ryzen 5 8400F and NVIDIA GeForce RTX 3070 Ti ranks 680th in Palworld. This places it in the 60th percentile of all systems tested, indicating that while it is not a top-tier enthusiast configuration, it outperforms the majority of setups in this game. The rank reflects a balance between the CPU’s strong single-thread performance and the GPU’s capable but memory-limited architecture.

The ranking suggests that this combo is well-matched for 1440p gaming, where it can deliver high frame rates at High settings, but it falls behind systems with more VRAM or higher-end GPUs at 4K. The data shows that the RTX 3070 Ti’s 8 GB memory is the primary weakness, as the card’s compute power is sufficient to push higher frame rates if memory capacity were not a constraint. The Ryzen 5 8400F, by contrast, does not appear to hold the system back, as evidenced by the high 1080p scores and the CPU’s strong benchmark standing relative to other processors. For users targeting 1080p or 1440p, this combination offers a smooth experience, but 4K enthusiasts will need to compromise on settings.