Fivem

Fivem’s performance with the AMD Ryzen 5 8400F and NVIDIA GeForce RTX 3070 Ti is heavily dictated by resolution and settings, with the data showing a clear transition from a CPU-bound scenario at 1080p to a GPU-bound one at 4K. The combo ranks in the top 38% of all tested configurations, and the measured FPS indicates that while the hardware is capable of high refresh rates at lower resolutions, the 8 GB VRAM and the GPU’s compute limits become the primary bottleneck at higher graphical presets.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and reveals a shift in the limiting component. At 1080p with Low settings, the combo produces 227.9 FPS, but at 4K Low, that figure falls to 83.3 FPS—a reduction of 63.4%. This scaling pattern is typical of a system where the CPU has ample headroom at lower resolutions, but the GPU begins to struggle as pixel count increases.

The data shows a more dramatic drop when moving from 1440p to 4K. At 1440p High, the average is 92.6 FPS, while 4K High yields 54.1 FPS, a 41.6% decrease. For Ultra settings, the drop is even more severe: 73.9 FPS at 1440p falls to 42.8 FPS at 4K, a 42.1% decline. This indicates that the RTX 3070 Ti’s compute resources are saturated at 4K, especially with higher presets, and the 8 GB GDDR6X memory is likely a contributing factor. The scaling from 1080p to 1440p is less punishing, with 1080p Ultra at 112.6 FPS dropping to 73.9 FPS at 1440p Ultra, a 34.4% loss, suggesting that 1440p is a more balanced operating point for this combo in Fivem.

How This Combo Ranks

The AMD Ryzen 5 8400F and NVIDIA GeForce RTX 3070 Ti combination holds rank 689 out of 1792 tested combos in Fivem. This places it in the 61st percentile of all configurations, meaning roughly 38% of tested systems deliver higher average FPS in this specific game. Given the hardware’s individual benchmark percentile scores—the CPU at 82 and the GPU at 74—the in-game rank is slightly lower than either component’s synthetic standing, which implies that Fivem’s engine does not fully leverage the strengths of this pairing.

The CPU’s nearest rivals in synthetic tests include the AMD Ryzen 7 2700X with a deltaPct of 0, and the AMD Ryzen 5 7500F with a deltaPct of 0.3, indicating near-identical average scores. The GPU’s nearest rival is the AMD Radeon RX 6700 with a deltaPct of -0.8, meaning the RTX 3070 Ti is about 0.8% behind in average synthetic score. In Fivem, however, the combo’s rank suggests that the game is more sensitive to the GPU’s memory capacity and the CPU’s single-thread performance than to raw multi-core throughput.

GPU Role

The RTX 3070 Ti features 8 GB of GDDR6X memory on a 256-bit bus, delivering a bandwidth of 608.3 GB/s. The memory clock is listed at 1188 MHz with 19 Gbps effective speed. The GPU’s base clock is 1575 MHz, with a boost clock of 1770 MHz. In Fivem, the impact of this memory configuration is visible in the scaling between presets. At 4K, the gap between Low (83.3 FPS) and Medium (64.8 FPS) is 18.5 FPS, while the gap between Medium and High (54.1 FPS) is 10.7 FPS. This non-linear degradation suggests that the 8 GB VRAM buffer is being filled as texture quality increases, causing a disproportionate performance hit at the higher presets.

The GPU’s compute specifications include 6144 shading units, 192 texture mapping units, and 96 raster output units. Its FP32 performance is 21.75 TFLOPS. The pixel rate is 169.9 GPixel/s, and the texture rate is 339.8 GTexel/s. These figures explain the strong 1080p performance, where the combo easily exceeds 112 FPS on Ultra. However, the 42.8 FPS at 4K Ultra indicates that the GPU is the limiting factor, as the CPU’s 6 cores and 12 threads are likely not fully utilized at that resolution. The GPU’s percentile rank of 74 against all GPUs further confirms that it is a mid-to-high-tier part, but Fivem’s demands at 4K push it to its limits.

FAQ

Q: What is the highest average FPS this combo achieves in Fivem?

A: The highest measured average FPS is 227.9, achieved at 1920x1080 resolution with Low settings.

Q: How does the combo perform at 1440p with Ultra settings?

A: At 2560x1440 with Ultra settings, the combo delivers an average FPS of 73.9.

Q: Is the CPU or GPU more likely to be the bottleneck at 4K?

A: The data indicates the GPU is the bottleneck at 4K, as the FPS drops significantly with higher presets (54.1 FPS at High vs 83.3 FPS at Low), while the CPU’s synthetic single-thread score is strong.

Q: What is the combo’s rank among all tested systems?

A: The combo ranks 689 out of 1792 tested combos in Fivem.

Q: How much faster is 1080p Low compared to 4K Ultra?

A: 1080p Low produces 227.9 FPS, which is 185.1 FPS higher than 4K Ultra’s 42.8 FPS.

Q: Does the GPU have enough VRAM for Ultra settings at 4K?

A: The 8 GB VRAM appears insufficient for 4K Ultra, as the FPS drops to 42.8, suggesting capacity or bandwidth limitations.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings yield 227.9 FPS, Medium drops to 176.5 FPS, High produces 142.6 FPS, and Ultra falls to 112.6 FPS. The scaling from Low to Ultra shows a 50.6% reduction in performance, which is substantial but still leaves the system playable at high refresh rates.

Moving to 2560x1440, the numbers are still strong but show a clear step down. Low settings average 147.4 FPS, Medium 118.5 FPS, High 92.6 FPS, and Ultra 73.9 FPS. The delta between Low and Ultra here is 49.9%, nearly identical to the 1080p scaling, indicating that the GPU is handling the resolution increase proportionally.

At 3840x2160, the performance drops off significantly. Low settings achieve 83.3 FPS, Medium 64.8 FPS, High 54.1 FPS, and Ultra 42.8 FPS. The gap between Low and Ultra is 48.6%, but the absolute numbers are much lower, making 4K gaming only viable on Low or Medium presets if a smooth experience is required. The 1080p Low result of 227.9 FPS is the only measurement that exceeds 200 FPS, confirming that this combo is best suited for high-refresh-rate 1080p or 1440p gaming.

CPU Role

The AMD Ryzen 5 8400F is a 6-core, 12-thread processor based on the Zen 4 architecture, codenamed Phoenix. It has a base clock of 4.20 GHz and a boost clock of 4.70 GHz, with a 65 W TDP. The CPU’s synthetic benchmarks show a single-thread score of 951 in 3dmark and 2943 in Cinebench R23, which are strong numbers that help in Fivem’s CPU-heavy multiplayer scenarios. The multi-threaded scores are also respectable, with Cinebench R23 multi-core at 20851 and 3dmark max threads at 6165.

In Fivem, the CPU’s role is most evident at 1080p Low settings, where the 227.9 FPS result suggests the processor can feed the GPU efficiently. However, the gap between Low and Medium at 1080p (51.4 FPS) is larger than the gap between Medium and High (33.9 FPS), which indicates that the CPU’s single-thread performance is sufficient to maintain high frame rates even as GPU load increases. The CPU’s nearest rival, the AMD Ryzen 7 2700X, has a deltaPct of 0 in average benchmark score, but the 8400F’s newer architecture and higher boost clock likely give it an edge in Fivem’s per-core workload. The 16 MB of shared L3 cache is a modest amount, but the data suggests it does not hinder performance in this game.

Settings Recommendations

For players seeking the highest refresh rates, the 1080p Low preset is the clear choice, delivering 227.9 FPS. This setting is ideal for competitive play or for users with high-refresh-rate monitors. If visual fidelity is more important, the 1080p High preset at 142.6 FPS offers a solid balance, while 1080p Ultra at 112.6 FPS still provides a smooth experience for most displays.

At 1440p, the Medium preset at 118.5 FPS is the recommended sweet spot, as it provides a significant visual improvement over Low (147.4 FPS) while maintaining frame rates above 100. The High preset at 92.6 FPS is also viable for users with 90 Hz or lower refresh rate monitors. For 4K, the data suggests that only Low settings (83.3 FPS) are acceptable for consistent gameplay, as Medium drops to 64.8 FPS and Ultra falls to 42.8 FPS, which may feel stuttery in fast-paced multiplayer.

The measured results indicate that this combo is best utilized at 1080p or 1440p, where the GPU’s 8 GB memory and compute power are sufficient. Pushing to 4K Ultra is not recommended given the 42.8 FPS average, which is below the 60 FPS threshold many players consider playable. The optimal experience for most users will be 1440p Medium or High, balancing visual quality with the high frame rates that Fivem’s multiplayer gameplay benefits from.