Palworld

The AMD Ryzen 5 8400F and AMD Radeon RX 570 combination delivers a playable but constrained experience in Palworld, landing near the bottom of the benchmark charts. With a combo rank of 1624 out of 1718 tested configurations, this pairing sits in the 5th percentile, indicating that most other hardware combinations will outperform it. The data reveals a system where the GPU is the primary bottleneck, yet the CPU’s architecture still shapes the overall performance ceiling in this survival title.

FAQ

Q: What is the overall ranking of this CPU and GPU combo in Palworld?

A: The combination ranks 1624 out of 1718 tested combos, placing it in the bottom 6% of all configurations. This indicates that the vast majority of tested systems will deliver higher frame rates in Palworld.

Q: What is the best average FPS this combo achieves at 1080p?

A: The highest average FPS recorded is 70.6, which occurs at 1920x1080 with Low settings. This is the only setting and resolution combination that breaks the 70 FPS threshold.

Q: How does the CPU compare to its nearest rival in synthetic benchmarks?

A: The Ryzen 5 8400F has an average benchmark score of 25064, which is nearly identical to the AMD Ryzen 7 2700X at 25057, showing a delta of 0%. It is also 0.3% ahead of the AMD Ryzen 5 7500F, which scores 24993.

Q: How does the GPU’s synthetic benchmark score compare to its closest competitor?

A: The Radeon RX 570 scores 30158 on average, which is 0.2% higher than the NVIDIA GeForce RTX 5060 at 30109. It also edges out the AMD Radeon RX 7700 XT by 0.2%, which scores 30097.

Q: What is the frame rate difference between Low and Ultra settings at 1440p?

A: At 2560x1440, Low settings yield an average of 49.6 FPS, while Ultra settings drop to 23.1 FPS. This represents a 53% reduction in performance when moving from the lowest to the highest preset.

Q: Is the CPU or GPU more likely to be the limiting factor at 4K?

A: The data suggests the GPU is the primary limiter. At 3840x2160, all settings produce average FPS below 30, with Ultra dropping to 13.3 FPS. The GPU’s 4 GB VRAM and 224.0 GB/s bandwidth appear insufficient for the resolution’s demands.

CPU Role

The AMD Ryzen 5 8400F is a 6-core, 12-thread processor based on the Zen 4 architecture, codenamed Phoenix. It operates with a base clock of 4.20 GHz and a boost clock of 4.70 GHz, which provides solid single-thread performance for Palworld’s game logic. In synthetic tests, the CPU achieves a Cinebench R23 multicore score of 20851 and a single-core score of 2943, demonstrating strong computational throughput for a desktop chip in this class.

The processor’s 16 MB of shared L3 cache and 83.2 GB/s memory bandwidth with DDR5 support help maintain smooth frame pacing in open-world scenarios. However, the benchmark results in Palworld indicate that the CPU is not the primary constraint at most resolutions. For instance, at 1080p Low, the combo reaches 70.6 FPS, which suggests the CPU can feed the GPU adequately at lower graphical loads. The CPU’s 82nd percentile ranking versus all CPUs further underscores that it is a capable mid-range part, unlikely to be the main source of frame rate drops in this title.

Interestingly, the Ryzen 5 8400F’s nearest rival in synthetic benchmarks is the AMD Ryzen 7 2700X, with a delta of 0%. This means the newer 8000-series chip performs on par with an older high-end part, yet in Palworld, the overall combo rank remains low due to the GPU’s limitations. The CPU’s 4 nm process node and 65 W TDP also indicate efficiency, but these traits do not translate to higher frame rates when the GPU is overwhelmed.

GPU Role

The AMD Radeon RX 570 is a Polaris 20 chip built on GCN 4.0 architecture, featuring 2048 shading units and 32 ROPs. It operates with a base clock of 1168 MHz and a boost clock of 1244 MHz, paired with 4 GB of GDDR5 memory on a 256-bit bus. The memory runs at 1750 MHz, providing 224.0 GB/s of bandwidth, which is a critical factor in a texture-heavy game like Palworld.

The GPU’s synthetic benchmark scores place it at the 74th percentile, with an average score of 30158. Its nearest rival is the NVIDIA GeForce RTX 5060, which it beats by 0.2%. However, these synthetic results do not reflect real-world gaming performance in Palworld, where the 4 GB VRAM capacity becomes a severe limitation. At 4K Ultra, the combo manages only 13.3 FPS, indicating that the GPU cannot handle the memory and compute demands of high-resolution textures.

The RX 570’s 5.095 TFLOPS of FP32 performance and 159.2 GTexel/s texture rate are modest by modern standards. In Palworld, this translates to a maximum of 70.6 FPS at 1080p Low, but the frame rate collapses as resolution and settings increase. The GPU’s end-of-life production status and 150 W TDP suggest it was designed for 1080p gaming, which the data confirms, as anything above that resolution results in sub-30 FPS averages.

How This Combo Ranks

The combo rank of 1624 out of 1718 places this configuration in the bottom 5% of all tested systems for Palworld. This is a stark indicator that the pairing is mismatched for the game’s requirements, with the GPU dragging down the overall experience. The CPU ranks in the 82nd percentile, but the GPU’s 74th percentile is not enough to overcome the graphical demands.

When compared to other combos, the data shows that most systems with even slightly better GPUs will outperform this setup. The RX 570’s nearest rival in synthetic benchmarks, the RTX 5060, has a similar average score, yet in Palworld, the 4 GB VRAM and older architecture likely cause more significant frame rate drops. This suggests that synthetic benchmarks overestimate the RX 570’s gaming capability in modern titles.

The rank also implies that users with this combo will need to make significant compromises to achieve playable frame rates. At 1080p Medium, the average FPS is 59.1, which is acceptable, but the Ultra preset drops to 36.7 FPS. The low rank is primarily due to the GPU’s inability to maintain consistent performance at higher settings, making this a system suited only for low-to-medium presets at 1080p.

Resolution Scaling

The measured FPS data shows a clear pattern of performance degradation as resolution increases. At 1080p Low, the combo achieves 70.6 FPS, but this drops to 49.6 FPS at 1440p Low and further to 29.9 FPS at 4K Low. This represents a 58% reduction in frame rate from 1080p to 4K, indicating that the GPU is the limiting factor.

The scaling is even more pronounced at higher settings. For example, at High settings, 1080p yields 44.5 FPS, 1440p drops to 32.6 FPS, and 4K falls to 19.9 FPS. This 55% drop from 1080p to 4K suggests that the GPU’s memory bandwidth and compute power are insufficient for the increased pixel count. The 4 GB VRAM is likely exhausted at 1440p and 4K, causing severe performance penalties.

The data implies that the CPU is not the bottleneck at higher resolutions. If the CPU were the limiting factor, the frame rate would remain relatively constant across resolutions. Instead, the steep drops indicate that the GPU is overwhelmed, particularly at 4K where even Low settings produce only 29.9 FPS. This makes the RX 570 a clear constraint, and users should avoid resolutions above 1080p for acceptable performance.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings produce an average of 70.6 FPS, which is the only preset to exceed 60 FPS. Medium settings follow with 59.1 FPS, High with 44.5 FPS, and Ultra with 36.7 FPS. The 34 FPS difference between Low and Ultra highlights the GPU’s sensitivity to graphical complexity.

At 2560x1440, all settings see a significant drop. Low settings average 49.6 FPS, Medium 41.1 FPS, High 32.6 FPS, and Ultra 23.1 FPS. The gap between Low and Ultra narrows to 26.5 FPS, but the overall performance is marginal, with only Low and Medium providing near-playable frame rates.

At 3840x2160, the combo struggles to maintain playability. Low settings average 29.9 FPS, Medium 19.4 FPS, High 19.9 FPS, and Ultra 13.3 FPS. Interestingly, Medium and High have nearly identical frame rates, suggesting a bottleneck beyond just settings. The 4K Ultra result of 13.3 FPS is the lowest measured, making this resolution impractical for anything other than screenshots.

Settings Recommendations

Based on the measured data, the optimal experience for this combo is at 1920x1080 with Low settings, which yields 70.6 FPS. This is the only configuration that provides a smooth frame rate above 60 FPS, making it the recommended preset for players who prioritize responsiveness over visual fidelity.

For those who prefer Medium settings, 1080p offers 59.1 FPS, which is still playable and provides a better visual experience. However, the 11.5 FPS drop from Low to Medium suggests diminishing returns, and users should be cautious about pushing higher. At 1440p, only Low settings at 49.6 FPS are recommended, as Medium drops to 41.1 FPS and High falls below 33 FPS.

Ultra settings should be avoided entirely, as they produce sub-40 FPS at 1080p and sub-25 FPS at 1440p. The data indicates that this combo is best suited for 1080p gaming with Low or Medium presets, with the understanding that higher settings will compromise the experience significantly. The 4K resolution is not viable for this pairing, as even Low settings fail to reach 30 FPS.