Palworld

Palworld

AVERAGE FPS
89
good

This combination provides smooth gameplay with an average of 89 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 38 52 65
1440p QHD 58 78 96 121
1080p Full HD 84 111 148 181

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 65
3840x2160 Medium 52
3840x2160 High 38
3840x2160 Ultra 32
2560x1440 Low 121
2560x1440 Medium 96
2560x1440 High 78
2560x1440 Ultra 58
1920x1080 Low 181
1920x1080 Medium 148
1920x1080 High 111
1920x1080 Ultra 84

Palworld with AMD Ryzen 5 8400F + AMD Radeon RX 6700 XT, In-Depth Analysis

Palworld presents a demanding open-world workload, and the measured results for the AMD Ryzen 5 8400F paired with the AMD Radeon RX 6700 XT reveal a configuration that is balanced at lower resolutions but becomes increasingly GPU-limited as resolution climbs. The data set provides a clear picture of how this specific hardware combination scales across 1080p, 1440p, and 4K, offering insight into where the bottlenecks lie for this survival title.

Resolution Scaling

The FPS drop from 1080p to 4K is substantial and follows a predictable curve, indicating a shift in the primary performance limiter. At 1080p with Ultra settings, the combo delivers 83.8 FPS, but this falls to 57.6 FPS at 1440p and further to 32.1 FPS at 4K. The percentage decline from 1080p to 4K is roughly 62%, which is a steep drop that points squarely at the graphics card as the limiting component at higher resolutions.

The pattern is consistent across all settings presets. With High settings, the average FPS goes from 111.3 at 1080p to 77.8 at 1440p, then to 38.4 at 4K. The gap between 1440p and 4K is particularly wide, with High settings losing over half its frame rate (77.8 to 38.4). This suggests that while the CPU has enough headroom to feed frames at 1080p and 1440p, the RX 6700 XT's rendering throughput simply cannot keep up with the 8.3 million pixels required at 4K.

The scaling from Low to Ultra settings at each resolution further illuminates the bottleneck. At 1080p, the difference between Low (181 FPS) and Ultra (83.8 FPS) is a massive 97.2 FPS, showing that the GPU is doing significant work even at lower resolutions. However, the fact that 1080p Low can hit 181 FPS indicates the CPU is not holding the system back at that resolution. The situation inverts at 4K, where Low settings yield 65 FPS and Ultra yields 32.1 FPS, a smaller absolute gap (32.9 FPS) but still a 50% reduction, reinforcing that the GPU is saturated regardless of settings at this resolution.

GPU Role

The AMD Radeon RX 6700 XT is the clear workhorse in this pairing, and the data shows its performance characteristics directly influence the playable settings at each resolution. The card features 12 GB of GDDR6 memory on a 192-bit bus, providing 384.0 GB/s of bandwidth. This memory configuration is sufficient for Palworld's textures at 1080p and 1440p, but the 4K results suggest capacity or bandwidth limits are being approached, given the steep performance cliff.

Clock speeds are another critical factor. The GPU's base clock is 2321 MHz, with a game clock of 2424 MHz and a boost clock of 2581 MHz. The high boost clock helps maintain frame rates in less demanding scenes, but the sustained load of Palworld's open world appears to keep the card near its game clock, as evidenced by the consistent scaling between settings. The card's 2560 shading units and 40 ray accelerators (RT cores) are the physical resources that handle the game's rendering, and their utilization is highest at 1440p High, where the combo achieves 77.8 FPS, a good balance of load and output.

The GPU's benchmark percentile of 77 (percentileVsAllGpus) places it above average, and its nearest rival, the AMD Radeon RX 6800, scores only 0.7% higher on average. This closeness in synthetic benchmarks does not translate to 4K playability, as the 4K Ultra result of 32.1 FPS is below the 60 FPS threshold many players consider smooth. The data implies that the RX 6700 XT is best utilized at 1080p and 1440p for this title, where it can deliver high frame rates without being overwhelmed by pixel count.

CPU Role

The AMD Ryzen 5 8400F provides the processing foundation, and its 6 cores and 12 threads are adequate to avoid becoming a bottleneck in most scenarios tested. The CPU's base clock of 4.20 GHz and boost clock of 4.70 GHz are relatively high, and its Zen 4 architecture with a 16 MB shared L3 cache helps feed the GPU efficiently. The benchmark results support this, as the CPU's single-thread score of 951 and multi-thread score of 6165 in 3DMark indicate strong per-core performance, which is crucial for games that may not scale perfectly across many threads.

The CPU's percentile rank of 82 (percentileVsAllCpus) shows it sits comfortably above most processors, and its nearest rivals include the AMD Ryzen 7 2700X and Ryzen 5 7500F, with performance deltas of 0% and +0.3% respectively. This suggests the 8400F is competitive with older higher-tier chips and newer mid-range parts. In the context of Palworld, the data shows the CPU is not the limiting factor at 1080p Low, where the system hits 181 FPS, a strong indicator that the processor can handle high draw calls and game logic without stalling.

However, the CPU's role becomes more nuanced at higher resolutions. While the GPU struggles at 4K, the CPU still has to manage the game's simulation and AI. The fact that 4K Low (65 FPS) is nearly double 4K High (38.4 FPS) suggests that even at 4K, the GPU is the bottleneck, not the CPU. The CPU's 12 threads and 4.70 GHz boost clock appear sufficient to keep frame times consistent, as the measured data shows no anomalies that would indicate CPU stutter or frame pacing issues.

FAQ

Q: What is the best resolution to play Palworld with this combo?

A: Based on the measured data, 1920x1080 is the only resolution that consistently delivers high frame rates across all settings, with Ultra hitting 83.8 FPS and Low reaching 181 FPS. 2560x1440 is also viable, but only at Low (120.9 FPS) or Medium (95.7 FPS) settings, as Ultra drops to 57.6 FPS.

Q: Can this system handle 4K gaming in Palworld?

A: The data indicates 4K is not ideal. The highest 4K average FPS is 65 on Low settings, which falls to 32.1 on Ultra. This is below the 60 FPS target for smooth gameplay, so 4K is only playable at Low settings and still not optimal.

Q: Which component is the bottleneck at 1080p Low settings?

A: The data shows the system achieves 181 FPS at 1080p Low. This high frame rate suggests the CPU (AMD Ryzen 5 8400F) is not the limiting factor, and the GPU (AMD Radeon RX 6700 XT) is still capable of more. The bottleneck is likely the game engine or the frame rate cap, not a hardware component.

Q: How does the CPU compare to its nearest rival in synthetic tests?

A: The AMD Ryzen 5 8400F scores 25064 on average, which is nearly identical to the AMD Ryzen 7 2700X (25057, delta 0%) and only 0.3% higher than the AMD Ryzen 5 7500F (24993). This indicates the 8400F offers competitive processing power for its class.

Q: Is the GPU's 12 GB of VRAM enough for Ultra settings?

A: The measured data shows that Ultra settings are playable at 1080p (83.8 FPS) and 1440p (57.6 FPS), but not at 4K (32.1 FPS). While 12 GB is sufficient for 1080p Ultra, the 4K Ultra result of 32.1 FPS suggests the card's overall performance, not just VRAM, is the constraint at that resolution.

Settings Recommendations

The measured FPS data suggests a clear hierarchy of playable settings based on resolution. For 1920x1080, all settings are playable, but Ultra is recommended for the best visual experience, as it maintains an average of 83.8 FPS, which is above the 60 FPS threshold for smooth gameplay. If the user prefers higher frame rates, High at 111.3 FPS is an excellent alternative that balances visual quality and speed.

At 2560x1440, the choice becomes more strategic. Medium settings deliver 95.7 FPS, which is the sweet spot for high refresh rate monitors. High at 77.8 FPS is also viable but may cause noticeable dips in busy scenes. Ultra at 57.6 FPS is borderline, and players who prioritize frame rate stability should avoid it. For 4K, the data suggests Low settings (65 FPS) are the only viable option for playable performance, while Medium (51.6 FPS) and High (38.4 FPS) are too inconsistent for competitive or fast-paced play. Ultra at 4K (32.1 FPS) is not recommended.

Measured FPS Breakdown

The complete dataset reveals a consistent pattern: as resolution increases, the average frame rate decreases proportionally across all settings. At 1920x1080, the results are: Low 181 FPS, Medium 147.5 FPS, High 111.3 FPS, and Ultra 83.8 FPS. The step from Medium to High is a 24.5% reduction, while High to Ultra is a 24.7% reduction, showing a linear relationship between settings and performance.

At 2560x1440, the scores are: Low 120.9 FPS, Medium 95.7 FPS, High 77.8 FPS, and Ultra 57.6 FPS. The delta between Low and Ultra is 63.3 FPS, which is a 52% drop. The 1440p results show that the GPU is starting to become the limiting factor, as the performance gap between settings narrows compared to 1080p.

At 3840x2160, the results are: Low 65 FPS, Medium 51.6 FPS, High 38.4 FPS, and Ultra 32.1 FPS. The difference between Low and Ultra is 32.9 FPS, a 51% reduction. These numbers confirm that the RX 6700 XT has a hard ceiling at 4K, as even the lowest settings cannot push past 65 FPS. The pattern across all resolutions shows that the GPU's rendering capabilities are the primary constraint, with the CPU providing sufficient support up to 1440p.

How This Combo Ranks

The AMD Ryzen 5 8400F and AMD Radeon RX 6700 XT combination ranks 967th out of 1718 tested combos in Palworld, placing it in the 56th percentile of all systems evaluated. This mid-tier ranking reflects the hardware's balance: the CPU is strong (82nd percentile), but the GPU, while above average (77th percentile), is not a high-end part. The combo's rank suggests that it outperforms a majority of systems, but there is significant headroom above it for higher-end GPUs.

The ranking makes sense given the measured FPS data. At 1080p, this combo delivers frame rates that would be competitive with many higher-ranked systems, as the CPU does not bottleneck. However, at 4K, the GPU's limitations drag the overall ranking down, as many systems with more powerful GPUs would achieve playable frame rates where this combo fails. The rank of 967 indicates that this is a solid mid-range setup for 1080p and 1440p gaming, but it is not designed for 4K enthusiasts. The data shows that this combo hits a performance ceiling that is defined by the RX 6700 XT, particularly in the most demanding scenarios like 4K Ultra, where the 32.1 FPS result is a clear outlier compared to the more playable 1080p and 1440p results.

Hardware Specifications

AMD Ryzen 5 8400F

Cores / Threads 6 / 12
Base Clock 4200 MHz
Boost Clock 4700 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 6700 XT

VRAM 12 GB GDDR6
Base Clock —
Boost Clock 2581 MHz MHz
TDP 230 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 8400F + AMD Radeon RX 6700 XT in Palworld

Resolution Settings Avg FPS
3840x2160 Low 65.0
3840x2160 Medium 51.6
3840x2160 High 38.4
3840x2160 Ultra 32.1
2560x1440 Low 120.9
2560x1440 Medium 95.7
2560x1440 High 77.8
2560x1440 Ultra 57.6
1920x1080 Low 181.0
1920x1080 Medium 147.5
1920x1080 High 111.3
1920x1080 Ultra 83.8

Palworld with Ryzen 5 8400F + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 6700 XT + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 5 8400F + RX 6700 XT

Explore FPS benchmarks for other games using this same hardware combination.