Palworld

The AMD Ryzen 5 7600 paired with the AMD Radeon RX 570 delivers a decidedly low-end experience in Palworld, placing in the 1643rd position out of 1718 tested combos. The data indicates that this configuration is fundamentally limited by the graphics card, with playable performance only achievable at 1080p on lower settings. While the CPU provides a solid foundation, the GPU's age and memory constraints severely bottleneck the system, making high resolutions and demanding presets impractical.

Resolution Scaling

The performance drop from 1080p to 4K is steep and clearly identifies the GPU as the primary limiting component. At 1080p with High settings, the combo produces an average of 48.3 FPS, but this falls to 31.7 FPS at 1440p and plummets to 17.1 FPS at 4K. This scaling pattern—a reduction of roughly 34% from 1080p to 1440p and a further 46% from 1440p to 4K—is characteristic of a GPU-bound scenario where the pixel throughput requirements outpace the RX 570's capabilities.

The trend persists across all settings presets. With Low settings, the system achieves 71.8 FPS at 1080p, 50.5 FPS at 1440p, and 28.2 FPS at 4K. The moderate preset shows 58.2 FPS at 1080p, 39.8 FPS at 1440p, and 19.6 FPS at 4K. The Ultra preset, which is the most demanding, yields 33.1 FPS at 1080p, 21.5 FPS at 1440p, and just 15.5 FPS at 4K. In every case, the frame rate roughly halves when moving from 1440p to 4K, confirming that the rendering resolution is the dominant factor.

This behavior indicates that the CPU is not the bottleneck at higher resolutions. If the processor were the limiting factor, frame rates would remain relatively flat as resolution increases. Instead, the consistent and significant FPS drops with each step up in resolution point directly to the RX 570's fill rate and memory bandwidth being overwhelmed. The 224.0 GB/s memory bandwidth and 4 GB of GDDR5 VRAM are simply insufficient for the demands of 4K rendering in a modern open-world title like Palworld.

CPU Role

The AMD Ryzen 5 7600 provides a robust foundation for this gaming workload. As a 6-core, 12-thread processor based on the Zen 4 architecture, it has a base clock of 3.80 GHz and a boost clock of 5.10 GHz. Its performance in synthetic benchmarks is strong, with a Cinebench R23 multi-core score of 22992 and a single-core score of 3246. These numbers place the CPU in the 83rd percentile of all tested processors, indicating it has ample headroom for gaming.

The CPU's role in this specific combo appears to be secondary, as the GPU becomes the limiting factor at most settings. However, the processor's single-thread performance is critical for maintaining playable frame rates at lower resolutions. At 1080p with Low settings, the system reaches 71.8 FPS, which is likely near the upper limit of what this GPU can output. The Ryzen 5 7600's high boost clock ensures that it can feed the GPU with enough data to avoid stalling, but the resulting frame rates are still constrained by the graphics card.

The data suggests that the CPU is not a source of major bottlenecking in this configuration. Its average benchmark score of 26617 is nearly identical to its nearest rival, the AMD Ryzen 7 5800X3D, which scores 26574 with a deltaPct of 0.2%. This means the Ryzen 5 7600 is on par with a highly regarded gaming CPU, further confirming that processor performance is not the primary issue. The limiting factor is unequivocally the graphics card.

GPU Role

The AMD Radeon RX 570 is the clear performance ceiling for this combo. This GPU, based on the Polaris 20 chip and GCN 4.0 architecture, has a base clock of 1168 MHz and a boost clock of 1244 MHz. It is equipped with 4 GB of GDDR5 memory on a 256-bit bus, providing a bandwidth of 224.0 GB/s. While this was adequate for its 2017 release, it is a major constraint in Palworld.

The GPU's limits are exposed by the benchmark data. Even at the lowest settings, the RX 570 cannot maintain a consistent 60 FPS at 1440p, dropping to 50.5 FPS. At 4K, performance is effectively unplayable, with all presets falling below 30 FPS. The Ultra preset at 1080p yields only 33.1 FPS, demonstrating that the GPU's 5.095 TFLOPS of FP32 performance and 32 ROPs are insufficient for high-detail rendering.

The GPU's overall performance percentile is 74th, and its average benchmark score of 30158 is remarkably close to its nearest rivals, such as the NVIDIA GeForce RTX 5060, which scores 30109 with a deltaPct of 0.2%. This parity in synthetic tests suggests the RX 570 is a mid-range performer, but in practice, its 4 GB VRAM capacity is a severe handicap. Palworld's open-world environments and texture streaming requirements likely exceed this memory limit, causing stuttering and reduced frame rates, particularly at higher resolutions and settings.

How This Combo Ranks

The combination of the Ryzen 5 7600 and RX 570 ranks 1643rd out of 1718 tested combos in Palworld. This places it in the bottom 5% of all configurations, indicating that it is a very weak match for this game. The ranking reflects the GPU's inability to handle the game's demands, despite the CPU's strong performance.

The CPU's strength does little to boost the overall combo ranking. The Ryzen 5 7600's nearest rival, the Intel Core i9-12900HK, has an average score of 26672 with a deltaPct of -0.2%, meaning the Ryzen 5 7600 is essentially statistically tied with it. This shows the processor is not a weak link. Conversely, the GPU's position in the 74th percentile shows it is below average, and this drags the entire system down.

This ranking is a clear verdict: the system is poorly suited for Palworld. The data shows that even budget-oriented configurations would likely outperform this pairing, as the RX 570 is the primary bottleneck. For any meaningful improvement, a GPU upgrade is mandatory, as the CPU has significant headroom to support a much more powerful graphics card.

Measured FPS Breakdown

The measured FPS data provides a detailed picture of the system's performance across different resolutions and settings. At 1080p, the results are as follows:

• Low: 71.8 FPS
• Medium: 58.2 FPS
• High: 48.3 FPS
• Ultra: 33.1 FPS

The 1080p results are the only ones that approach playability. The Low preset is the only setting that breaks the 60 FPS threshold, while Medium and High are playable but not smooth. The Ultra preset is marginal, dipping to 33.1 FPS, which may be acceptable for some but is not ideal for a fast-paced game.

At 1440p, performance drops significantly:

• Low: 50.5 FPS
• Medium: 39.8 FPS
• High: 31.7 FPS
• Ultra: 21.5 FPS

Only the Low preset at 1440p can be considered playable, and even then, it is below 60 FPS. The Medium and High presets are borderline, while Ultra is not recommended.

At 4K, the results are all below playable thresholds:

• Low: 28.2 FPS
• Medium: 19.6 FPS
• High: 17.1 FPS
• Ultra: 15.5 FPS

None of the 4K settings achieve 30 FPS, making this resolution unusable for this combo. The data clearly shows that the system is only viable at 1080p, and even then, only with lower settings presets.

FAQ

Q: Can this combo run Palworld at 4K?

A: No. The highest average FPS at 4K is 28.2 FPS on Low settings, which is not smooth. All other settings at 4K fall below 20 FPS, making the game unplayable.

Q: What is the best resolution for this system?

A: The only resolution that offers playable frame rates is 1920x1080. At this resolution, the Low preset achieves 71.8 FPS, and the Medium preset achieves 58.2 FPS.

Q: Is the CPU or GPU the main bottleneck?

A: The GPU is the clear bottleneck. The CPU's performance is in the 83rd percentile, while the frame rates drop dramatically with resolution increases, indicating the RX 570 is the limiting factor.

Q: How does the Ryzen 5 7600 compare to its closest rival?

A: The Ryzen 5 7600 has an average benchmark score of 26617, which is virtually identical to the AMD Ryzen 7 5800X3D's score of 26574, a delta of just 0.2%. This shows the CPU is on par with a high-end gaming processor.

Q: Is the RX 570's memory capacity a problem?

A: Yes, the 4 GB of GDDR5 memory is likely insufficient for Palworld's high-resolution textures, contributing to the severe performance drops at 1440p and 4K.

Q: What is the minimum frame rate at 1080p Ultra?

A: The average frame rate at 1080p Ultra is 33.1 FPS, which is below the 60 FPS target for smooth gameplay.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo are at 1080p with the Low preset, which delivers an average of 71.8 FPS. This is the only configuration that provides a consistently smooth experience. The Medium preset at 1080p, with 58.2 FPS, is a viable alternative for users who prioritize visual quality over a strict 60 FPS target.

For users willing to accept lower frame rates, the High preset at 1080p (48.3 FPS) offers a better visual experience, but the 33.1 FPS on Ultra is not recommended due to the significant performance hit. At 1440p, only the Low preset (50.5 FPS) is playable, making it a poor choice for this system. All 4K settings are unplayable and should be avoided.

The data suggests that the user should stick to 1080p. The Low preset provides the best overall experience, balancing frame rate and visual fidelity. If visual quality is more important, the Medium preset is the highest setting that maintains an average above 55 FPS. This system is not suited for high-detail or high-resolution gaming in Palworld, and users should prioritize frame rate over graphical fidelity to ensure a playable experience.