Palworld

Palworld on the AMD Ryzen 7 5700 and AMD Radeon RX 570 combination presents a clear picture of a system constrained heavily by its graphics processor at higher resolutions, while the CPU holds its own at lower settings. The measured frame rates reveal a component that is consistently stretched to its limits, making resolution and settings selection critical for an enjoyable experience.

Resolution Scaling

The transition from 1080p to 4K demonstrates a severe performance cliff that is typical of a GPU-bound scenario. At the "Low" settings preset, the average frame rate drops from 73 FPS at 1920x1080 to 48 FPS at 2560x1440, a 34% reduction, and then plummets to 27 FPS at 3840x2160, a further 44% drop. This pattern shows that the RX 570's rendering pipeline is the primary bottleneck, as the workload on the graphics card scales dramatically with pixel count.

The "High" settings preset tells a similar story but at a much lower performance baseline. Here, the average FPS falls from 46 at 1080p to 30 at 1440p, and finally to a playable-but-struggling 17 FPS at 4K. The delta between Low and High at each resolution is also telling; at 1080p, the difference is 27 FPS (73 vs 46), which indicates that the GPU is already being taxed by higher graphical fidelity, leaving less headroom for resolution scaling.

The data implies that the 4K resolution is effectively out of reach for this combo, even at the lowest settings. The 27 FPS average at 4K Low is below the threshold for smooth gameplay, and the 13 FPS at 4K Ultra confirms that the RX 570's 4 GB of VRAM and 224.0 GB/s memory bandwidth are simply insufficient for the demands of Palworld at that pixel density. The scaling from 1440p to 4K is more punishing than from 1080p to 1440p, suggesting a non-linear increase in memory pressure and shader complexity that overwhelms the GPU. This combo is best suited for 1080p or 1440p gaming, where the CPU can better feed the GPU.

FAQ

Q: What is the best resolution to play Palworld with this hardware?

A: Based on the measured data, 1920x1080 is the only resolution where this combo achieves consistently playable frame rates. The "Medium" preset at 1080p yields an average of 59 FPS, while "Low" hits 73 FPS, indicating the CPU and GPU can maintain a smooth experience at this resolution.

Q: Can this system handle Palworld at 4K resolution?

A: No. The data shows that at 3840x2160, the average frame rate ranges from 13 FPS on "Ultra" to 27 FPS on "Low". All 4K results are below the standard 30 FPS threshold for playability, confirming the GPU is not powerful enough for 4K gaming in this title.

Q: How much of a performance difference is there between the "Low" and "Ultra" presets?

A: At 1080p, the difference is substantial. The "Low" preset averages 73 FPS, while "Ultra" drops to 35 FPS, a reduction of 38 FPS. At 1440p, the gap widens further, with "Low" at 48 FPS and "Ultra" at 23 FPS, showing a 25 FPS difference.

Q: Is the AMD Ryzen 7 5700 CPU a limiting factor in Palworld?

A: The benchmark data suggests the CPU is not the primary constraint. The Ryzen 7 5700 scores 20,655 in Cinebench R23 multicore and has a 78th percentile ranking among all CPUs. The dramatic FPS drops when increasing resolution point to the GPU, not the CPU, as the bottleneck.

Q: What is the performance difference between the "Medium" and "High" presets at 1440p?

A: At 2560x1440, the "Medium" preset averages 39 FPS, while "High" drops to 30 FPS. This 9 FPS difference indicates that the "Medium" preset is a more viable option for maintaining a higher frame rate without a massive visual compromise.

Q: How does this combo rank compared to all other tested combinations?

A: The combo ranks 3543 out of 3711 tested combinations for Palworld. This places it in the bottom 5% of all tested systems, highlighting that it is a lower-performing setup for this specific game.

How This Combo Ranks

The combination of the AMD Ryzen 7 5700 and AMD Radeon RX 570 ranks 3543 out of 3711 tested combos in Palworld, placing it in the 95th percentile of weakest performers. This low ranking is a direct consequence of the GPU's limitations. While the CPU itself is a capable mid-range part, ranking in the 78th percentile among all CPUs, the RX 570's 74th percentile standing among GPUs is not enough to overcome the high demands of this survival title.

The data shows a significant imbalance between the two components in this game. The Ryzen 7 5700, with its 8 cores and 16 threads based on the Zen 3 architecture, provides ample processing power. However, the RX 570, a Polaris 20 chip from the GCN 4.0 architecture, is clearly the anchor. This ranking suggests that to improve performance in Palworld, the GPU would need to be upgraded first, as the CPU has headroom to spare. The combo's poor standing is not a reflection of a faulty CPU, but rather an indication that pairing a strong mid-range CPU with an older, entry-level GPU creates a significant bottleneck in graphically intensive games.

Settings Recommendations

Given the measured FPS data, the optimal settings for this combo are heavily dependent on the user's target resolution and frame rate preference. For a smooth 60 FPS experience at 1080p, the "Low" preset is the only option that delivers, with an average of 73 FPS. However, for a better visual experience, the "Medium" preset at 1080p is the sweet spot, providing an average of 59 FPS, which is still very playable and a 13 FPS improvement over the "High" preset.

At 1440p, the options become more constrained. The "Low" preset yields an average of 48 FPS, which is acceptable for slower-paced gameplay, but the "Medium" preset drops to 39 FPS. Pushing to "High" results in an average of 30 FPS, which is borderline playable but may feel stuttery in action-heavy scenes. For 4K gameplay, none of the presets are recommended, as even the "Low" setting only averages 27 FPS. The best experience per the measured rows is the "Medium" preset at 1080p, as it balances visual fidelity with a frame rate that remains above 50 FPS, avoiding the stutter seen at "High" and "Ultra" settings.

Measured FPS Breakdown

At 1920x1080, the performance envelope is clear. The "Low" preset leads with an average of 73 FPS. The "Medium" preset follows closely with an average of 59 FPS, with a minimum of 50 FPS and a maximum of 68 FPS. The "High" preset sees a significant drop to 46 FPS average. The "Ultra" preset is the most demanding, yielding only an average of 35 FPS. This shows a 38 FPS spread between the lowest and highest settings.

Moving to 2560x1440, all scores take a hit. The "Low" preset averages 48 FPS. "Medium" provides an average of 39 FPS, with a minimum of 33 FPS and a maximum of 45 FPS. "High" drops to an average of 30 FPS. The "Ultra" preset falls to a low average of 23 FPS. The relative performance ordering remains the same, but the gap between "Low" and "Ultra" narrows to 25 FPS as GPU limits are reached.

At 3840x2160, the system's limitations are laid bare. "Low" averages 27 FPS. "Medium" averages 22 FPS, with a min of 18 FPS and a max of 25 FPS. "High" drops to 17 FPS, and "Ultra" bottoms out at 13 FPS. These numbers are consistently below the threshold for comfortable gaming, confirming that 4K is not a viable resolution for this hardware in Palworld.

CPU Role

The AMD Ryzen 7 5700 is a Zen 3 architecture processor with 8 cores and 16 threads, clocked at a base of 3.70 GHz and a boost of 4.60 GHz. Its benchmark scores are robust, with a Cinebench R23 multicore score of 20,655 and a single-core score of 2,916. This suggests the CPU has plenty of headroom for gaming tasks, as its 78th percentile ranking among all CPUs indicates it is a solid performer.

In Palworld, the CPU's role is to manage game logic, physics, and AI, which are typically multi-threaded workloads. The Ryzen 7 5700's 8-core, 16-thread configuration is well-suited for this task, and the data suggests it is not the bottleneck. If the CPU were the limiting factor, we would expect to see frame rates plateau across different resolutions. Instead, we see a steady decline from 1080p to 4K, which points to the GPU being saturated. The CPU's high single-thread performance (2,916 in R23) also helps in scenarios that are less parallelized, ensuring that the game logic does not become a frame-rate limiter before the GPU does. The 16 MB of L3 cache and 51.2 GB/s memory bandwidth are adequate for feeding the GPU at lower resolutions, but they are not the primary constraint in this pairing.

GPU Role

The AMD Radeon RX 570 is the clear limiting factor in this combo. With a base clock of 1168 MHz and a boost of 1244 MHz, it is an older GCN 4.0 architecture chip. Its 4 GB of GDDR5 memory on a 256-bit bus provides 224.0 GB/s of bandwidth, which is insufficient for the high-resolution textures and effects in Palworld at 4K. The GPU's 5.095 TFLOPS of FP32 performance is simply not enough to keep up with the demands of the game at higher settings and resolutions.

The data confirms this GPU-bound scenario. At 1080p, the GPU is the bottleneck, as we see frame rates drop from 73 FPS on "Low" to 35 FPS on "Ultra," showing that the GPU's shading units and ROPs are fully utilized. At 4K, the GPU is overwhelmed, with the "Ultra" preset producing just 13 FPS. The 4 GB VRAM capacity is also a concern; as resolution and texture quality increase, the card likely runs out of memory, causing severe performance degradation. The RX 570's 74th percentile ranking among GPUs is respectable for its age, but it is not enough to handle a modern, demanding title like Palworld at high fidelity. The GPU's 150 W TDP and 450 W suggested PSU are less relevant to performance than its raw compute and memory limitations, which are the true barriers to higher frame rates.