Palworld

# Palworld with AMD Ryzen 5 7400F + Intel Arc B580

The AMD Ryzen 5 7400F paired with the Intel Arc B580 produces a mid-range gaming combination that ranks in the 75th percentile of all tested combos in Palworld, placing it at position 2798 out of 3711. This pairing leverages a 6-core, 12-thread Zen 4 processor with a 32 MB shared L3 cache, alongside a 12 GB GDDR6 GPU with 2560 shading units. The measured frame rates show a system that can handle 1080p and 1440p gaming comfortably, but struggles to maintain playable performance at 4K Ultra settings, where the average drops to 25 FPS—a figure that falls below the threshold for smooth gameplay.

FAQ

Q: What is the overall ranking of this combo in Palworld?

A: The combination ranks 2798 out of 3711 tested combos in Palworld, placing it in the 75th percentile of all configurations measured.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 7400F has an average benchmark score of 32750, which is 0.1% higher than the Intel Core i5-14600T, 0.2% higher than the Intel Core Ultra 7 155H, and 0.3% higher than the AMD Ryzen AI 7 PRO 360. It trails the AMD Ryzen 7 PRO 6850H by 0.2%.

Q: What is the best resolution for this combo in Palworld?

A: At 1080p, the combo delivers 147 FPS on Low settings and 69 FPS on Ultra, while at 1440p it achieves 97 FPS on Low and 46 FPS on Ultra. The 1440p High setting yields 60 FPS, making it a viable target for balanced performance.

Q: Does the GPU bottleneck at 4K?

A: Yes, at 3840x2160 the average FPS drops to 33 on High and 25 on Ultra, indicating the Intel Arc B580 becomes the limiting factor at this resolution. The CPU's 6 cores and 12 threads are sufficient for lower resolutions, but the GPU's 13.67 TFLOPS FP32 compute cannot sustain high frame rates at 4K.

Q: What is the GPU's VRAM capacity and bandwidth?

A: The Intel Arc B580 has 12 GB of GDDR6 memory on a 192-bit bus, providing 456.0 GB/s of bandwidth. The memory clock runs at 2375 MHz, which translates to 19 Gbps effective.

Q: How does the GPU rank among all tested graphics cards?

A: The Intel Arc B580 has a percentile rank of 68 among all GPUs, with an average benchmark score of 23021. It is 0.6% faster than the NVIDIA GeForce RTX 2080 but 0.7% slower than the NVIDIA GeForce RTX 3080.

How This Combo Ranks

The combo's rank of 2798 out of 3711 places it in the middle-to-upper tier of tested configurations. This position reflects a balance between the CPU's 83rd percentile ranking among all processors and the GPU's 68th percentile standing among all graphics cards. The Ryzen 5 7400F scores 21765 in Cinebench R23 multi-core and 3072 in single-core, which are solid mid-range results. The Arc B580's PassMark G3D score of 15748 and 3DMark Steel Nomad DX12 score of 3068 indicate a GPU that performs competitively with older high-end cards like the RTX 2080.

In Palworld specifically, the measured frame rates show that this combo can deliver 147 FPS at 1080p Low, which is well above the 60 FPS threshold for smooth play. However, the 4K Ultra result of 25 FPS demonstrates a clear performance ceiling. The ranking suggests that while the combo is not top-tier, it is far from the bottom, with roughly 25% of tested combinations performing better. The deltaPct values against nearest CPU rivals show negligible differences (ranging from -0.2% to 0.3%), meaning the CPU choice is unlikely to be the differentiating factor in Palworld performance.

Resolution Scaling

The resolution scaling pattern reveals a predictable drop in frame rates as pixel count increases, but the rate of decline varies significantly by settings preset. From 1080p to 1440p, the average FPS decreases by 38% on Low settings (147 to 97), 35% on High (91 to 60), 34% on Medium (119 to 78), and 33% on Ultra (69 to 46). This consistent ~33-38% reduction indicates that the GPU is scaling relatively linearly with pixel count, which is typical for a game that is not heavily CPU-bound at these settings.

The transition from 1440p to 4K shows a more pronounced drop. On Low settings, FPS falls from 97 to 54, a 44% reduction. On High, it drops from 60 to 33, a 45% reduction. Medium goes from 78 to 43 (45% loss), and Ultra from 46 to 25 (46% loss). This steeper decline at 4K suggests that the GPU is running out of compute resources, with the Arc B580's 13.67 TFLOPS FP32 throughput becoming the primary bottleneck. The 4K results, ranging from 25 to 54 FPS depending on settings, indicate that this resolution is only playable on Low settings, and even then, the 54 FPS average is marginal.

The limiting component at 1080p and 1440p appears to be the GPU, as the CPU's 6 cores and 12 threads at boost clocks up to 4.70 GHz are sufficient to feed the graphics card. The fact that FPS scales consistently with resolution rather than showing a CPU plateau suggests Palworld is not heavily multithreaded, and the Ryzen 5 7400F's single-core performance (3072 in Cinebench R23) is adequate for this title.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates. Low settings produce an average of 147 FPS, which is more than double the 60 FPS target for smooth gameplay. Medium settings yield 119 FPS with a minimum of 101 and maximum of 137, showing tight frame pacing. High settings average 91 FPS, and Ultra drops to 69 FPS. These results indicate that 1080p gaming is comfortable across all presets, with even Ultra maintaining playable frame rates.

Moving to 2560x1440, performance remains respectable but requires more careful settings selection. Low settings average 97 FPS, Medium achieves 78 FPS with a range of 67 to 90, High hits 60 FPS exactly, and Ultra falls to 46 FPS. The 1440p High result of 60 FPS is a borderline playable experience, while Medium offers a smoother experience with 78 FPS. For competitive play or high refresh rate monitors, Low settings at 97 FPS would be the preferred choice.

At 3840x2160, the GPU's limitations become apparent. Low settings average 54 FPS, Medium averages 43 FPS with a range of 37 to 50, High drops to 33 FPS, and Ultra falls to 25 FPS. The 4K Medium result of 43 FPS is below the 60 FPS threshold for smooth play, and the minimum of 37 FPS indicates noticeable stuttering. The 4K Low setting, while playable at 54 FPS, still shows that this combo is not ideal for 4K gaming in Palworld. The measured FPS data across all resolutions and settings shows a clear pattern: the combo excels at 1080p, is adequate at 1440p with settings compromises, and struggles at 4K except on the lowest preset.

GPU Role

The Intel Arc B580 plays a critical role in determining Palworld performance, particularly at higher resolutions. With 12 GB of GDDR6 memory and 456.0 GB/s of bandwidth, the GPU has sufficient memory capacity for the game's textures, but the bandwidth becomes a limiting factor at 4K. The memory clock of 2375 MHz (19 Gbps effective) is moderate, and the 192-bit bus width restricts peak bandwidth compared to wider-bus GPUs.

The GPU's 2560 shading units, 160 TMUs, and 80 ROPs provide a compute throughput of 13.67 TFLOPS FP32. This figure, combined with a boost clock of 2670 MHz, explains why the GPU performs well at 1080p but degrades significantly at 4K. The pixel rate of 213.6 GPixel/s and texture rate of 427.2 GTexel/s are mid-range values that align with the observed frame rates. The 20 RT cores are present but not heavily utilized in Palworld, which is not a ray tracing-intensive title.

The GPU's benchmark scores reinforce this analysis. The PassMark G3D score of 15748 and Geekbench Vulkan score of 109672 indicate a mid-range GPU that competes with the RTX 2080 (0.6% faster) and RTX 3080 (0.7% slower). The 3DMark Steel Nomad DX12 score of 3068 places it in a similar performance tier. The 68th percentile ranking among all GPUs means it outperforms roughly two-thirds of tested graphics cards, but it is not a high-end part.

In Palworld, the GPU's 12 GB VRAM is more than sufficient for the game's assets, as evidenced by the lack of texture-related stuttering in the measured FPS data. The bottleneck at 4K is compute and memory bandwidth, not capacity. The GPU's 190 W TDP and 450 W suggested PSU indicate it is a power-efficient design, but the performance ceiling is clear from the data.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and desired frame rate. At 1080p, the High preset delivers 91 FPS, which is a good balance between visual quality and performance. For players with 144 Hz or higher refresh rate monitors, the Low preset at 147 FPS is the best choice, while Ultra at 69 FPS is acceptable for those prioritizing image quality over frame rate. The Medium preset at 119 FPS offers a strong middle ground with a minimum of 101 FPS ensuring no significant drops.

At 1440p, the Medium preset provides the best experience with 78 FPS average and a 67 FPS minimum, which stays above the 60 FPS threshold. The High preset at 60 FPS is exactly at the playable limit but may experience occasional dips below 60 FPS in demanding scenes. The Low preset at 97 FPS is recommended for competitive play, while Ultra at 46 FPS is not advisable due to sub-60 FPS performance.

At 4K, only the Low preset at 54 FPS is playable, and even then, the experience is marginal. The Medium preset at 43 FPS with a 37 FPS minimum will cause noticeable stuttering, making it unsuitable for smooth gameplay. For 4K gaming, players should consider lowering the resolution to 1440p or accepting the Low preset with reduced visual fidelity. The data clearly shows that this combo is best suited for 1080p and 1440p gaming, with the Medium preset at 1440p offering the most balanced experience across all measured configurations.

CPU Role

The AMD Ryzen 5 7400F provides a solid foundation for Palworld, with 6 cores and 12 threads based on the Zen 4 architecture. The base clock of 3.70 GHz and boost clock of 4.70 GHz are competitive, and the 32 MB shared L3 cache helps with game data locality. The CPU's 5 nm process and 65 W TDP make it efficient, while the 83.2 GB/s memory bandwidth and dual-channel DDR5 support ensure adequate data throughput.

In synthetic benchmarks, the CPU scores 21765 in Cinebench R23 multi-core and 3072 in single-core, placing it in the 83rd percentile among all processors. The nearest rivals show that the CPU is well-positioned: it is 0.1% faster than the Intel Core i5-14600T, 0.2% faster than the Intel Core Ultra 7 155H, and 0.3% faster than the AMD Ryzen AI 7 PRO 360. It trails the AMD Ryzen 7 PRO 6850H by only 0.2%, indicating that all these CPUs perform nearly identically in average benchmark scores.

In Palworld, the CPU's role is secondary to the GPU at 1080p and 1440p, as evidenced by the consistent FPS scaling with resolution changes. The 6 cores and 12 threads are sufficient for the game's multithreading, which appears to be limited based on the performance data. The single-core performance, measured at 3072 in Cinebench R23, is adequate for the game's main thread, and the boost clock of 4.70 GHz provides sufficient single-threaded throughput.

However, at 4K, the CPU is not the bottleneck—the GPU is. The frame rates at 4K are uniformly low across all settings, indicating that the Arc B580 cannot maintain high FPS regardless of CPU capabilities. The CPU's 83rd percentile ranking and competitive benchmark scores confirm that it is not holding back the combo in Palworld. The PassMark scores support this: multithread score of 25645, single-thread score of 3689, and physics score of 1660 all indicate a capable processor that handles the game's demands without issue.