Archeage

The AMD Ryzen 5 7400F paired with the Intel Arc B580 is a combination that lands in the middle of the pack for ArcheAge, and the measured data shows a system that behaves predictably across resolutions and settings. This is a 6-core, 12-thread Zen 4 processor on the AM5 socket, paired with a 12 GB GDDR6 graphics card built on Intel’s Xe2-HPG Battlemage architecture. For an MMORPG like ArcheAge, which launched in 2014, this pairing produces playable frame rates at 1080p and 1440p, but it struggles at 4K, particularly on higher settings. The data indicates a clear pattern: the GPU becomes the limiting factor as resolution climbs, while the CPU provides consistent headroom for most scenarios. Let’s break down exactly what the benchmark results show, starting with the combo’s overall standing.

How This Combo Ranks

The measured data places this specific CPU and GPU pairing at rank 2091 out of 2761 tested combos for ArcheAge. That is a percentile position of roughly 75.7%, meaning this combo outperforms about three-quarters of all tested configurations in this game, but it is far from the top. The rank reflects a balance between the Ryzen 5 7400F’s solid multi-threaded capability and the Arc B580’s mid-tier rasterization performance. For context, the CPU alone sits in the 83rd percentile among all tested CPUs, while the GPU sits in the 68th percentile among all GPUs. The combo’s rank is lower than the CPU’s individual percentile, which suggests that in ArcheAge, the graphics card is dragging the overall result down more than the processor is pulling it up.

In practical terms, this is not a combo that will dominate leaderboards, but it is also not a weak link. The data shows that the Arc B580’s average benchmark score of 23021 places it in the same performance neighborhood as the AMD Radeon RX 580 2048SP (average score 23061, delta -0.2%), the NVIDIA GeForce RTX 2080 (average score 22895, delta 0.6%), and the NVIDIA GeForce RTX 3080 (average score 23172, delta -0.7%). That is a wide range of historical GPUs, but the delta percentages are all within about 1% of each other, indicating that the Arc B580 is a consistent performer at this level. The CPU’s nearest rivals include the Intel Core i5-14600T (average score 32707, delta 0.1%), the Intel Core Ultra 7 155H (average score 32697, delta 0.2%), and the AMD Ryzen AI 7 PRO 360 (average score 32662, delta 0.3%), all of which are within a fraction of a percent of the 7400F’s average score of 32750.

The combo rank of 2091 out of 2761 means that in ArcheAge specifically, this pairing is neither a standout nor a disappointment. It sits comfortably in the upper-middle tier. The data suggests that if you are aiming for consistent 1080p or 1440p play, this combo will deliver, but if you expect 4K Ultra performance, you will be looking at the lower end of the rankings. The gap between the CPU’s individual percentile (83rd) and the combo’s overall rank (75.7th percentile) is a direct result of the GPU’s lower standing. In a game like ArcheAge, which is not known for extreme CPU demands, the balance tips toward the GPU once resolutions increase.

GPU Role

The Intel Arc B580 is the component that dictates most of the visual performance in this pairing. It features 12 GB of GDDR6 memory on a 192-bit bus, providing a memory bandwidth of 456.0 GB/s. The base clock and boost clock are both set to 2670 MHz, which is a modest clock speed for a modern GPU, but the architecture compensates with raw throughput. The card has 2560 shading units, 160 texture mapping units, and 80 raster output pipelines, along with 20 ray tracing cores. Its FP32 performance is rated at 13.67 TFLOPS, and the pixel rate is 213.6 GPixel/s, with a texture rate of 427.2 GTexel/s.

In ArcheAge, the GPU’s role is most apparent when you look at the frame rate scaling across settings. At 1080p, the Arc B580 produces an average of 124 FPS on Low settings, which drops to 111 FPS on Medium, 75 FPS on High, and 51 FPS on Ultra. That is a steep decline from Low to Ultra, but the card handles 1080p Medium and High with ease. The 12 GB VRAM buffer is more than sufficient for an MMORPG from 2014, even at higher resolutions, so memory capacity is not a limiting factor here. The bandwidth of 456.0 GB/s ensures that texture streaming and draw calls do not become bottlenecks in crowded zones.

The GPU’s benchmark scores reinforce its mid-tier positioning. In PassMark, it scores 15748 in G3D and 7729 in GPU compute. In 3DMark Steel Nomad (DX12), it scores 3068, and in Geekbench, it scores 92821 in OpenCL and 109672 in Vulkan. These numbers place the Arc B580 in the 68th percentile among all GPUs, which aligns with its measured performance in ArcheAge. The nearest rival data shows it trading blows with older high-end cards like the RTX 2080 and RTX 3080, but the delta percentages are tiny—less than 1% in either direction. This means that in synthetic benchmarks, the Arc B580 is effectively a peer of those cards, but in a real-world game like ArcheAge, the results are more nuanced. At 4K, for instance, the card falls to 20 FPS on Ultra settings, which is unplayable, but at 1440p High, it manages 51 FPS, which is borderline acceptable for an MMORPG.

Resolution Scaling

The measured FPS data shows a clear and consistent drop as resolution increases from 1080p to 1440p to 4K. At 1080p High, the combo averages 75 FPS. Moving to 1440p High, that drops to 51 FPS, a reduction of 32%. At 4K High, the average falls to 29 FPS, which is another 43% drop from 1440p. This scaling pattern indicates that the GPU is the primary limiting component at higher resolutions. The CPU, with its 6 cores and 12 threads boosting to 4.70 GHz, is not the bottleneck here; the frame rate loss is too steep to be explained by processor limitations.

Look at the Low settings for a clearer picture. At 1080p Low, the combo hits 124 FPS. At 1440p Low, it drops to 84 FPS, a 32% decrease. At 4K Low, it falls to 48 FPS, another 43% drop. The percentage reductions are nearly identical across settings, which is a hallmark of GPU-bound scaling. If the CPU were the limiting factor, you would expect the frame rate to stay relatively flat as resolution increases, because the processor would be doing the same amount of work regardless of pixel count. Instead, the data shows a linear relationship between resolution and frame rate, confirming that the Arc B580’s rendering throughput is what caps performance.

The Medium settings provide additional insight. At 1080p Medium, the average is 111 FPS, with a minimum of 94 and a maximum of 127. At 1440p Medium, the average drops to 75 FPS, with a minimum of 63 and a maximum of 86. At 4K Medium, the average is 43 FPS, with a minimum of 36 and a maximum of 49. The minimum frame rates at 1440p and 4K are still above 30 FPS, which means that even in demanding scenes, the combo does not dip into unplayable territory, but the 4K Medium result is marginal. The data suggests that this combo is best suited for 1080p, where it can push high frame rates even on Ultra, and 1440p, where it handles Medium to High settings comfortably. At 4K, the only viable option is Low settings, and even then, the 48 FPS average is not smooth enough for competitive play.

Measured FPS Breakdown

The measured FPS data is comprehensive, covering four resolutions and four settings each. Starting with 1920x1080, the combo achieves its best results. On Low settings, the average FPS is 124, which is well above the refresh rate of most standard monitors. On Medium, the average is 111 FPS, with a minimum of 94 and a maximum of 127, indicating consistent performance without major stutters. On High, the average drops to 75 FPS, which is still smooth for an MMORPG. On Ultra, the average is 51 FPS, which is playable but noticeably less fluid than the lower settings.

Moving to 2560x1440, the performance takes a step down. Low settings yield an average of 84 FPS, which is still good for 1440p. Medium settings average 75 FPS, with a minimum of 63 and a maximum of 86, showing that the combo can hold near-60 FPS even in demanding scenes. High settings average 51 FPS, which is on the edge of playability for some users. Ultra settings drop to 35 FPS, which is a significant decrease and suggests that the GPU is struggling with the increased pixel count and shader complexity.

At 3840x2160, the results are largely disappointing. Low settings average 48 FPS, which is the only setting that approaches playability at 4K. Medium settings average 43 FPS, with a minimum of 36 and a maximum of 49, meaning that the frame rate can dip into the 30s during intense moments. High settings average 29 FPS, which is below the threshold for smooth gameplay. Ultra settings average 20 FPS, which is essentially a slideshow. The data clearly shows that 4K is not this combo’s intended territory, and users should stick to 1080p or 1440p for a satisfying experience.

The minimum and maximum FPS values for Medium settings provide a window into frame time consistency. At 1080p, the range is 94 to 127 FPS, a spread of 33 FPS. At 1440p, the range is 63 to 86 FPS, a spread of 23 FPS. At 4K, the range is 36 to 49 FPS, a spread of 13 FPS. The narrowing spread at higher resolutions indicates that the GPU is becoming more consistently saturated, which reduces the variability but also lowers the average. For an MMORPG with large player gatherings and dynamic world events, frame time consistency is important, and the data suggests that 1440p Medium offers the best balance of average FPS and stability.

CPU Role

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 architecture, codenamed Raphael. It has a base clock of 3.70 GHz and a boost clock of 4.70 GHz, with a 65 W TDP. The CPU features 64 KB of L1 cache per core, 1 MB of L2 cache per core, and a 32 MB shared L3 cache. It supports DDR5 memory on a dual-channel bus, providing a memory bandwidth of 83.2 GB/s. The processor is built on a 5 nm process at TSMC, with 6,570 million transistors on a 71 mm² die.

In ArcheAge, the CPU’s role is to handle game logic, NPC AI, and network synchronization, which are all single-threaded to some degree, but the 12 threads also help with background tasks and asset streaming. The benchmark data shows that the 7400F is more than adequate for this game. Its Cinebench R23 multi-core score is 21765, and its single-core score is 3072, which puts it in the 83rd percentile among all CPUs. The PassMark single-thread score is 3689, and the multi-thread score is 25645. These numbers indicate a processor that can handle both single-threaded and multi-threaded workloads with ease.

The nearest rival data for the CPU shows that it is essentially tied with the Intel Core i5-14600T (delta 0.1%), the Intel Core Ultra 7 155H (delta 0.2%), and the AMD Ryzen AI 7 PRO 360 (delta 0.3%), while being slightly ahead of the AMD Ryzen 7 PRO 6850H (delta -0.2%). These sub-1% differences mean that in synthetic benchmarks, the 7400F is indistinguishable from its peers. In ArcheAge, the CPU’s performance is unlikely to be the limiting factor, as evidenced by the resolution scaling data. The frame rate drops from 1080p to 4K are far too large to be attributed to the processor.

The CPU’s 12 threads are particularly useful for an MMORPG, where multiple background processes (such as voice chat, streaming, or web browsers) can compete for resources. The 32 MB of L3 cache provides a decent buffer for game data, and the 83.2 GB/s memory bandwidth ensures that the CPU can feed the GPU without starving it. The 7400F has no integrated graphics, so the Arc B580 is doing all the rendering work, which is expected for a dedicated gaming setup. The CPU’s 65 W TDP and 5 nm process also mean it runs cool and efficient, which is a plus for long gaming sessions in crowded zones.

FAQ

Q: Is this combo capable of running ArcheAge at 1080p with high settings?

A: Yes. The measured data shows an average of 75 FPS at 1920x1080 with High settings. This is smooth and well above the 60 FPS threshold for most players.

Q: What is the best resolution and setting combination for this pairing?

A: Based on the data, 2560x1440 with Medium settings offers the best balance, averaging 75 FPS with a minimum of 63 and a maximum of 86. This provides good visual quality without sacrificing frame rate stability.

Q: Can this combo handle 4K gaming in ArcheAge?

A: Not really. At 3840x2160, the highest average FPS is 48 on Low settings. Medium drops to 43 FPS, High to 29 FPS, and Ultra to 20 FPS. 4K is only playable on Low, and even then, it is marginal.

Q: How does the Intel Arc B580 compare to its nearest GPU rivals?

A: The Arc B580’s average benchmark score of 23021 is nearly identical to the AMD Radeon RX 580 2048SP (23061, delta -0.2%), the NVIDIA GeForce RTX 2080 (22895, delta 0.6%), the NVIDIA GeForce RTX 3080 (23172, delta -0.7%), and the NVIDIA P106-100 (23249, delta -1%). All deltas are within 1%.

Q: Is the Ryzen 5 7400F a bottleneck for the Arc B580 in this game?

A: No. The data shows that frame rates scale heavily with resolution, which indicates GPU-bound performance. The CPU’s 6 cores and 12 threads, boosting to 4.70 GHz, provide ample headroom for ArcheAge’s CPU demands.

Q: What is the CPU’s performance percentile compared to the GPU’s?

A: The Ryzen 5 7400F is in the 83rd percentile among all CPUs, while the Intel Arc B580 is in the 68th percentile among all GPUs. This gap explains why the combo’s overall rank (2091 out of 2761) is lower than the CPU’s individual standing.