Palworld

Palworld pairs the AMD Ryzen 5 5600 with the AMD Radeon RX 9070 in a combination that ranks 563rd out of 1,718 tested configurations, placing it in the top third of all combos. The data shows a system that delivers strong 1080p performance, remains highly capable at 1440p, and only begins to struggle at 4K with maximum settings. This is a balanced pairing where the GPU is the primary driver of frame rates at higher resolutions, while the CPU’s six cores and twelve threads provide ample headroom for the game’s survival mechanics.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600 brings six cores and twelve threads to this pairing, operating at a base clock of 3.50 GHz and a boost clock of 4.40 GHz. This Zen 3 architecture, built on a 7 nm process, offers a 32 MB shared L3 cache, which is beneficial for the open-world traversal and creature management systems in Palworld. The CPU’s 65 W TDP and dual-channel DDR4 memory support (with a 51.2 GB/s memory bandwidth) are typical for a mid-range desktop part, and its 79th percentile ranking among all CPUs indicates it is a competent performer.

Benchmark results for the Ryzen 5 5600 show a single-thread score of 882 in 3DMark and a multi-thread score of 5,659 at max threads. In Cinebench R23, it achieves 2,584 points single-core and 18,309 points multi-core. These figures suggest that the CPU is not a bottleneck at 1080p, where the game’s frame rates are exceptionally high. However, the data shows that as resolution increases, the CPU’s influence wanes. The measured FPS at 1080p Low (234 FPS) versus 4K Low (84.9 FPS) demonstrates that the GPU is handling the increased pixel workload, while the CPU maintains a consistent foundation. The Ryzen 5 5600’s performance is within 0.6% of the Intel Xeon D-1746TER and 0.9% behind the Intel Core i7-11700F, confirming it is a solid, but not exceptional, processor for this game.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the best resolution for this combo to achieve high frame rates?

A: The data indicates 1080p is the sweet spot, with average FPS ranging from 113.2 at Ultra to 234 at Low. Even at 1440p, the combo delivers over 72 FPS at Ultra, while 4K drops below 50 FPS at High settings.

Q: How does the combo rank among all tested configurations?

A: This pairing ranks 563rd out of 1,718 tested combos, placing it in the top 33% of all systems tested for Palworld.

Q: Is the CPU or GPU more likely to be the limiting factor at high settings?

A: The GPU is the limiting factor at higher resolutions. The frame rate drops from 143.6 FPS at 1080p High to 50.6 FPS at 4K High, a reduction of 93 FPS, which is far larger than what the CPU alone would cause. The CPU’s 3DMark max-thread score of 5,659 shows it can keep up with the GPU’s output.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 1440p, the difference is significant: the combo achieves 154.6 FPS on Low and 72.5 FPS on Ultra, a drop of 82.1 FPS. This indicates that Ultra settings place a heavy load on the GPU.

Q: How does the RX 9070’s benchmark score compare to its nearest rivals?

A: The RX 9070 has an average benchmark score of 34,780, which is 0.2% lower than the NVIDIA A2 (34,866) and 0.3% higher than the NVIDIA Quadro GV100 (34,677). This shows it sits in a competitive middle ground.

Q: Does the combo maintain playable frame rates at 4K?

A: Yes, but only at lower settings. At 4K Medium, it achieves 67.5 FPS, and at 4K High, it drops to 50.6 FPS. At 4K Ultra, it falls to 40.9 FPS, which may be less desirable for smooth gameplay.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the Ryzen 5 5600 and RX 9070 achieves a rank of 563 out of 1,718 tested combos in Palworld. This places the system in the upper third of all configurations, indicating a strong overall performance level. The ranking reflects a balance between the CPU’s mid-tier positioning (79th percentile among CPUs) and the GPU’s similarly strong standing (79th percentile among GPUs). The data suggests that this combo outperforms a majority of systems, likely due to the GPU’s high memory bandwidth and the CPU’s sufficient multi-threading capabilities.

The gap between this combo and the top performers is notable but not extreme. With a rank of 563, it is ahead of roughly 1,155 other tested combos. The measured frame rates support this ranking: at 1080p, the combo is capable of exceeding 230 FPS on Low settings, which is a high bar for many systems. At 1440p, it remains above 70 FPS even on Ultra, which is a demanding setting. The combo’s performance is consistent with its rank, showing no major weaknesses in either CPU or GPU-bound scenarios.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the combo delivers its highest frame rates. On Low settings, it averages 234 FPS, which drops to 188 FPS on Medium and 143.6 FPS on High. Ultra settings still produce a respectable 113.2 FPS. This resolution shows the GPU is fully utilized, with the CPU providing enough headroom to avoid bottlenecking.

Moving to 2560x1440, the frame rates remain strong but show a clear scaling trend. Low settings yield 154.6 FPS, Medium drops to 127.6 FPS, and High averages 98.4 FPS. Ultra settings fall to 72.5 FPS, which is still smooth for most players. The data shows a roughly 34% reduction from 1080p to 1440p across all settings, indicating the GPU is handling the additional pixel load effectively.

At 3840x2160, the combo begins to show its limits. Low settings produce 84.9 FPS, Medium drops to 67.5 FPS, and High averages 50.6 FPS. Ultra settings are the most demanding, yielding only 40.9 FPS. These numbers indicate that while 4K is playable at lower settings, the GPU’s 16 GB of memory and 644.6 GB/s bandwidth are not enough to maintain high frame rates at maximum graphical fidelity.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The frame rate scaling from 1080p to 4K is steep and consistent across all settings. At Low, the drop is from 234 FPS to 84.9 FPS, a reduction of 64%. At Medium, it falls from 188 FPS to 67.5 FPS, a 64% drop as well. High settings see a decline from 143.6 FPS to 50.6 FPS, a 65% reduction, while Ultra falls from 113.2 FPS to 40.9 FPS, a 64% decrease.

This uniform scaling pattern indicates that the GPU is the limiting component at higher resolutions. The percentage drop is nearly identical regardless of settings, which suggests the CPU is not the bottleneck. The RX 9070’s 36.13 TFLOPS of FP32 performance and 322.6 GPixel/s pixel rate are being fully taxed at 4K. The CPU’s role remains constant, as evidenced by its stable performance in synthetic benchmarks, but the GPU’s workload increases exponentially with resolution. The data shows that for 4K gaming, the combo would benefit from a more powerful GPU, while the Ryzen 5 5600 is adequate for the task.

Settings Recommendations — which preset gives the best experience per the measured rows

For the best balance of visual quality and performance, the Medium preset at 1440p is the recommended choice. The data shows 127.6 FPS at this setting, which is well above the 60 FPS threshold for smooth gameplay, while still providing a significant visual upgrade over Low. At 1080p, High settings are ideal, offering 143.6 FPS, which is both visually rich and highly responsive.

For players prioritizing maximum frame rates, Low settings at 1080p are the clear winner, delivering 234 FPS, which is beneficial for competitive play or fast-paced exploration. At 4K, Medium settings (67.5 FPS) are preferable over High (50.6 FPS) or Ultra (40.9 FPS), as they maintain a playable frame rate while retaining some graphical fidelity. Ultra settings are only recommended for 1080p, where the combo still achieves 113.2 FPS, but at higher resolutions, the performance cost is too high. The data suggests that High settings at 1440p (98.4 FPS) are a solid alternative for those who want better visuals than Medium without the performance penalty of Ultra.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 9070 is a powerful component in this pairing, built on the RDNA 4.0 architecture with a 4 nm process. It features 16 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 644.6 GB/s. The GPU’s boost clock is 2520 MHz, with a game clock of 2070 MHz, and it draws a TDP of 220 W. The 128 ROPs and 224 TMUs contribute to a pixel rate of 322.6 GPixel/s and a texture rate of 564.5 GTexel/s, which are key metrics for rendering Palworld’s detailed environments.

The GPU’s 56 RT cores and 3,584 shading units enable advanced effects, but the data shows that at 4K, the GPU is the limiting factor. The memory bandwidth is sufficient for 1080p and 1440p, but at 4K, the demands outpace what the GPU can deliver, particularly at Ultra settings. The RX 9070’s benchmark scores, such as 25,381 in Passmark G3D and 6,290 in 3DMark Steel Nomad, place it in the 79th percentile among all GPUs. Its nearest rival, the NVIDIA A2, is only 0.2% faster, confirming that this GPU is a high-performance part that pairs well with the Ryzen 5 5600 for most gaming scenarios.