Palworld

Palworld presents an interesting optimization challenge for the AMD Ryzen 5 4600G and NVIDIA GeForce RTX 4080 pairing. The benchmark data reveals a system where the high-end GPU is often waiting on the older CPU, but the sheer power of the RTX 4080 still delivers excellent frame rates across most settings. The measured results show a clear hierarchy of performance that favors higher resolutions to balance the load, but the CPU's limitations become apparent at 1080p.

Settings Recommendations

For the best experience, the Medium preset at 2560x1440 emerges as the most balanced configuration from the measured data. This setting provides an average of 169 FPS, which is 39 FPS higher than the High preset at the same resolution. The Medium preset also offers a minimum FPS of 144, ensuring that frame pacing remains smooth during demanding scenes, which is crucial for a survival game where sudden combat or base-building can cause dips.

At 1920x1080, the Medium preset is the definitive choice for high-refresh-rate displays, delivering an average of 232 FPS with a minimum of 197 FPS. While the Low preset pushes the average to 250 FPS, the visual quality reduction is substantial for only an 18 FPS gain. The High preset drops to 198 FPS, making Medium the sweet spot for both fluidity and visual fidelity. The Ultra preset at this resolution yields 150 FPS, which is playable, but the performance cost relative to Medium is significant.

For 4K gaming, the High preset is the recommended starting point, achieving 72 FPS on average. This is the only setting at 3840x2160 that stays comfortably above the 60 FPS threshold. The Medium preset offers 94 FPS but with a minimum of 80 FPS, which is acceptable, but High provides a better balance of visual quality and frame rate stability. The Ultra preset at 55 FPS falls below the ideal smoothness threshold corrected for a high-refresh monitor, making it less desirable despite the visual upgrade.

The data suggests that the Low preset is rarely optimal for this combo. At 1080p, it provides a marginal 18 FPS uplift over Medium, while at 1440p, the gain is 40 FPS over Medium, but this comes at a steep visual cost. The performance headroom is better spent on higher settings, as the RTX 4080 has ample power to handle the increased graphical load without compromising playability at 1440p and below.

GPU Role

The NVIDIA GeForce RTX 4080 is the dominant component in this pairing, and its capabilities are clearly reflected in the measured FPS. With a boost clock of 2505 MHz and 16 GB of GDDR6X memory on a 256-bit bus, the card provides substantial bandwidth and compute power. The benchmark results show that the GPU is capable of pushing frame rates well over 200 FPS at 1080p, indicating it is not the limiting factor at lower resolutions.

The GPU's 76 RT cores and 304 Tensor cores are relevant for Palworld's potential future updates, but the current data shows a rasterization-heavy workload. The card's FP32 performance of 48.74 TFLOPS allows it to handle the game's complex environments and numerous on-screen entities. The 16 GB VRAM is particularly beneficial for the Ultra preset at 4K, where memory capacity can be a bottleneck for lesser cards, but here it ensures the scene data is readily accessible.

The GPU's performance percentile of 86 places it in the top tier of all tested graphics cards. Its average benchmark score of 54247 is within 0.1% of the RTX 4080 SUPER, indicating that this card is performing at its expected level. The data shows that the RTX 4080's role is to provide a massive performance ceiling, but the CPU often prevents it from being fully utilized at lower resolutions.

The measured FPS scaling from 1080p to 4K demonstrates the GPU's ability to maintain high frame rates even under significant resolution load. At High settings, the FPS drops from 198 at 1080p to 130 at 1440p, a 34% reduction, and then to 72 at 4K, a further 45% reduction. This scaling is typical for a high-end GPU, showing that it is the primary driver of performance at higher resolutions.

Resolution Scaling

The FPS data reveals a predictable pattern of performance degradation as resolution increases, but the degree of the drop varies by settings preset. From 1920x1080 to 2560x1440, the average FPS decreases by 31% at Low settings (from 250 to 209), by 27% at Medium (from 232 to 169), by 34% at High (from 198 to 130), and by 34% at Ultra (from 150 to 99). This consistent scaling indicates that the GPU is handling the increased pixel count efficiently.

The transition from 2560x1440 to 3840x2160 shows a more significant drop. At Low settings, the FPS falls by 44% (from 209 to 116), at Medium by 44% (from 169 to 94), at High by 45% (from 130 to 72), and at Ultra by 44% (from 99 to 55). The 4K resolution demands a substantial amount of pixel throughput, and the RTX 4080's bandwidth of 716.8 GB/s is being taxed, but the card still delivers playable frame rates at all settings except Ultra.

The scaling pattern suggests that the limiting component shifts with resolution. At 1080p, the large FPS gaps between settings (e.g., 250 vs 150 at Ultra) indicate that the CPU is constraining the GPU, as the GPU is capable of much higher frame rates but is bottlenecked by the Ryzen 5 4600G's single-thread performance. At 4K, the FPS differences between settings are more evenly distributed, showing that the GPU becomes the primary bottleneck due to the sheer rendering load.

This behavior is typical for a high-end GPU paired with an older mid-range CPU. The data shows that the combo is best utilized at 1440p or 4K, where the GPU's workload is high enough to mitigate the CPU's limitations)Skip to content. At 1080p, the CPU limits the maximum FPS, but the RTX 4080 still ensures that the frame rate remains high enough for competitive play.

Measured FPS Breakdown

The complete measured FPS dataset provides a detailed view of the combo's capabilities across all tested configurations. At 1920x1080 with Low settings, the average FPS is 250, which is the highest recorded for any setting. The Medium preset yields 232 FPS with a minimum of 197 and a maximum of 267, showing consistent performance. High settings achieve 198 FPS, while Ultra drops to 150 FPS.

At 2560x1440, the performance scales down appropriately. Low settings average 209 FPS, Medium averages 169 FPS with a minimum of 144 and a maximum of 195, High averages 130 FPS, and Ultra averages 99 FPS. The minimum FPS of 144 at Medium settings is notable, as it ensures that even the lowest frame rates are above the standard 144Hz refresh rate, providing a smooth experience.

The 3840x2160 results show the most variation. Low settings average 116 FPS, Medium averages 94 FPS with a minimum of 80 and a maximum of 108, High averages 72 FPS, and Ultra averages 55 FPS. The Ultra preset at 4K is the only configuration that falls below the 60 FPS threshold, indicating that this setting is too demanding for a consistently smooth experience.

The data also reveals a consistent FPS hierarchy across all resolutions: Low > Medium > High > Ultra. The gap between Medium and High is relatively smaller at 1080p (232 vs 198, a 17% difference) compared to 4K (94 vs 72, a 30% difference), suggesting that the CPU's influence diminishes as the GPU workload increases. The Medium preset's min FPS values are particularly strong, never dropping below 144 FPS at 1440p and 197 FPS at 1080p.

How This Combo Ranks

The combination of the AMD Ryzen 5 4600G and NVIDIA GeForce RTX 4080 ranks 391 out of 3711 tested combos in Palworld. This places it in the top 10.5% of all configurations, which is a strong result given the CPU's age. The high ranking is primarily driven by the GPU's exceptional performance, which compensates for the CPU's mid-range capabilities.

This ranking indicates that the combo is well-suited for high-refresh-rate gaming at 1440p and solid 4K gaming. The percentile rank of 391 out of 3711 means that most tested combos perform worse in Palworld, but there are 390 combinations that achieve higher frame rates. These higher-ranked combos likely feature more modern CPUs with better single-thread performance, which are less likely to bottleneck the RTX 4080 at lower resolutions.

The CPU's percentile of 71 and GPU's percentile of 86 highlight the mismatch in this pairing. The GPU is in the top 14% of all GPUs, while the CPU is only in the top 29% of all CPUs. This imbalance is the primary reason why the combo does not rank higher. In a game like Palworld, which is likely CPU-bound in certain scenarios, the Ryzen 5 4600G's limitations prevent the combo from achieving the very top tier of performance.

Despite this, the 391st rank is respectable. It shows that the combo delivers a performance level that is well above average, and the RTX 4080 ensures that the experience is still excellent in most situations. The data suggests that upgrading the CPU would yield a significant improvement in rank, particularly at 1080p where the CPU bottleneck is most pronounced.

CPU Role

The AMD Ryzen 5 4600G is a 6-core, 12-thread processor based on the Zen 2 architecture, with a base clock of 3.70 GHz and a boost clock of 4.20 GHz. Its 8 MB of shared L3 cache and dual-channel DDR4 memory support are typical for its generation. The CPU's average benchmark score of 17507 places it at the 71st percentile, and it performs within 1% of rivals like the AMD Ryzen 3 PRO 5355GE and Intel Core 7 150U.

In Palworld, the CPU's role is to handle game logic, physics, and AI calculations. The measured FPS data shows that the CPU is a limiting factor at lower resolutions. At 1080p, the FPS difference between Low and Ultra settings is 100 FPS (250 vs 150), which is a large gap that cannot be explained by GPU load alone. This indicates that the CPU is struggling to feed the GPU with enough frames at higher settings, where the game's simulation complexity increases.

The CPU's single-thread performance is a critical weakness. With a 3DMark single-thread score of 726 and a Cinebench R23 single-core score of 1919, the Ryzen 5 4600G is not competitive with newer processors. Palworld, like many survival games, likely relies heavily on single-threaded performance for its main game loop. This causes the frame rate to be capped by the CPU's ability to process game logic, rather than the GPU's rendering power.

The multi-threaded performance is more robust, with a Cinebench R23 multi-core score of 13593 and a PassMark multi-thread score of 15992. This helps in scenarios with many simultaneous entities, but the game's primary bottleneck remains single-thread speed. The data shows that at 4K, the CPU's influence diminishes, as the GPU takes over as the primary bottleneck, but the CPU still prevents the FPS from reaching the levels seen with faster processors.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: The data shows that 2560x1440 offers the best balance of visual quality and performance. At Medium settings, the combo achieves an average of 169 FPS with a minimum of 144 FPS, providing a smooth experience on high-refresh-rate monitors. While 1080p offers higher frame rates, the CPU bottleneck limits the gains, making 1440p the sweet spot.

Q: Does the RTX 4080's 16 GB VRAM matter for Palworld?

A: Yes, the 16 GB of GDDR6X memory is a significant asset, especially at higher resolutions. The data shows that the Ultra preset at 4K, which is the most demanding configuration, still achieves 55 FPS. The ample VRAM ensures that the game's textures and assets are stored locally, preventing stuttering that can occur with less memory.

Q: Why is the Ultra preset at 4K only 55 FPS?

A: The Ultra preset at 3840x2160 is the most demanding setting tested, and the 55 FPS average indicates that the GPU is heavily loaded. This is the only configuration that falls below the 60 FPS threshold, suggesting that the combination of high resolution and maximum settings is too much for consistent smoothness. Lowering to High settings increases the average to 72 FPS.

Q: Is the CPU a bottleneck for this GPU in Palworld?

A: Yes, the benchmark results indicate a CPU bottleneck at lower resolutions. At 1080p, the FPS difference between Low (250 FPS) and Ultra (150 FPS) is 100 FPS, which is unusually large and suggests the CPU is limiting the GPU's output. The CPU's single-thread score of 1919 in Cinebench R23 is a key indicator of this limitation.

Q: How does this combo compare to other tested configurations?

A: This combo ranks 391 out of 3711 tested combos in Palworld, placing it in the top 10.5%. The GPU's high performance percentile (86) and the CPU's mid-range percentile (71) show that the combo benefits greatly from the RTX 4080, but the CPU prevents it from reaching the highest ranks.

Q: What is the recommended preset for 1080p gaming?

A: For 1080p, the Medium preset is recommended. It provides an average of 232 FPS with a minimum of 197 FPS, which is ideal for high-refresh-rate displays. The Low preset offers slightly more FPS (250), but the visual quality reduction is not worth the small performance gain. The High and Ultra presets provide lower frame rates (198 and 150 FPS) with diminishing visual returns.