Palworld
This combination delivers exceptional performance with an average of 134 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 52 | 68 | 89 | 109 |
| 1440p QHD | 93 | 123 | 160 | 184 |
| 1080p Full HD | 141 | 178 | 196 | 211 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis
Palworld pairs the AMD Ryzen 5 2600 with the NVIDIA GeForce RTX 5070 Ti, creating a system where a 2018-era six-core processor meets a current-generation Blackwell GPU. The benchmark results show a combination that is heavily GPU-bound at higher resolutions but increasingly CPU-limited as resolution drops, with the data indicating that the RTX 5070 Ti is doing most of the heavy lifting.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 2600 is a 6-core, 12-thread processor from the 2000 series, built on the Zen architecture with a 12 nm process node. Its base clock is 3.40 GHz, boosting to 3.90 GHz, and it carries 16 MB of shared L3 cache. This CPU sits in the 75th percentile against all CPUs, with an average benchmark score of 21484. Its nearest rivals include the Intel Core Ultra 5 228V (0.2% faster), Intel Core i9-11900H (0.5% faster), Intel Xeon D-1746TER (0.7% slower), and AMD EPYC 9454 (1.2% slower), showing that the 2600's overall processing power is competitive with much newer parts.
In Palworld, the CPU's role becomes evident when examining the frame rate scaling across resolutions. At 1080p with Low settings, the combo achieves 211 FPS average, which is the highest result in the entire dataset. The fact that this is the peak suggests that at this resolution and setting combination, the Ryzen 5 2600 is capable of feeding the RTX 5070 Ti enough data to reach over 200 FPS. The CPU's 6 cores and 12 threads are sufficient for Palworld's survival-game workload, which typically involves world simulation, creature AI, and building physics.
However, the data reveals a plateau effect. At 1080p, moving from Low to Medium settings only drops the average from 211 to 196 FPS, and High settings yield 178 FPS. The gap between Low and Medium is just 15 FPS, while the gap between Medium and High is 18 FPS. This relatively small spread indicates that the CPU is starting to limit the system at 1080p, as the GPU has headroom but the processor cannot push frame rates much higher. The 1080p Ultra result of 141 FPS shows a more significant drop of 37 FPS from High, which suggests that the increased draw calls and object counts at Ultra settings put additional strain on the CPU's single-thread performance.
The Ryzen 5 2600's single-thread score of 2239 in Passmark and 1154 in Geekbench single-core tests positions it as a modest performer by modern standards. Its nearest CPU rivals all score within 1.2% of its average benchmark, which means that swapping to those chips would not dramatically change Palworld's CPU-bound behavior. The CPU's memory bandwidth of 46.9 GB/s over dual-channel DDR4 could also be a factor in open-world games, though the data does not isolate this variable.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce RTX 5070 Ti is the dominant component in this pairing. It features 16 GB of GDDR7 memory on a 256-bit bus, delivering 896.0 GB/s of bandwidth. The GPU runs at a base clock of 2295 MHz with a boost clock of 2452 MHz, and it uses the Blackwell 2.0 architecture on a 5 nm process from TSMC. The RTX 5070 Ti sits in the 86th percentile against all GPUs, with an average benchmark score of 49957. Its nearest rivals include the AMD Radeon RX Vega 64 (0.1% faster), Intel Arc A550M (0.4% slower), AMD Radeon RX 6900 XT (2% slower), and AMD Radeon RX 6800 XT (3.1% slower), placing it in a performance class that is well above the CPU.
The GPU's role in Palworld is clearly demonstrated by the resolution scaling data. At 4K with High settings, the combo produces 68 FPS average. Dropping to 1440p High yields 123 FPS, and 1080p High gives 178 FPS. The RTX 5070 Ti's 16 GB VRAM is ample for Palworld at any of these settings, as the game's textures and world geometry do not appear to exceed this capacity based on the measured results. The GPU's 8960 shading units and 280 TMUs provide substantial raw compute, which the data shows is being utilized at higher resolutions.
The GPU's memory bandwidth of 896.0 GB/s is particularly relevant for Palworld's large open world, where streaming textures and assets can be memory-intensive. The measured FPS at 4K Medium (89 FPS) versus 4K High (68 FPS) shows a 21 FPS difference, indicating that the GPU is sensitive to the rendering load. The 4K Ultra result of 52 FPS demonstrates that the RTX 5070 Ti can handle max settings at 4K, though it falls below the 60 FPS threshold that many players consider acceptable. The GPU's pixel rate of 235.4 GPixel/s and texture rate of 686.6 GTexel/s provide context for these results, as Palworld's vegetation and terrain rendering place heavy demands on these subsystems.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The FPS scaling from 1080p to 4K reveals a classic pattern of GPU-bound behavior at higher resolutions. At High settings, the average FPS drops from 178 at 1080p to 123 at 1440p (a 31% reduction) and then to 68 at 4K (a 45% reduction from 1440p). This steep decline as pixel count increases is the signature of a GPU-limited system, where the RTX 5070 Ti's rendering workload scales directly with resolution.
Low settings show an even more pronounced scaling curve. At 1080p Low, the combo achieves 211 FPS. At 1440p Low, that drops to 184 FPS (a 13% reduction), and at 4K Low, it falls to 109 FPS (a 41% reduction from 1440p). The relatively small drop from 1080p to 1440p at Low settings (27 FPS) compared to the larger drop from 1440p to 4K (75 FPS) suggests that at 1080p Low, the CPU is limiting the system. If the GPU were the sole bottleneck, the scaling from 1080p to 1440p would be more linear, as it is from 1440p to 4K.
Medium settings provide the clearest data, as they include min and max FPS values. At 1080p Medium, the average is 196 FPS with a min of 166 and max of 225. At 1440p Medium, the average drops to 160 FPS (min 136, max 184). At 4K Medium, the average is 89 FPS (min 75, max 102). The min FPS values show that the system maintains playable frame rates even in demanding scenes, with the 4K Medium min of 75 FPS being well above the 4K Ultra average of 52 FPS.
The scaling pattern indicates that the Ryzen 5 2600 becomes the limiting factor at 1080p, particularly at Low settings where the GPU has minimal work. The RTX 5070 Ti is capable of much higher frame rates than the CPU can feed at 1080p, as evidenced by the 211 FPS ceiling. At 4K, the GPU takes over as the primary bottleneck, and the CPU's limitations become less relevant. The 4K Ultra result of 52 FPS shows that even with a strong GPU, Palworld's Ultra settings at 4K are demanding enough to bring the RTX 5070 Ti to its knees.
FAQ
Q: Can this combo run Palworld at 60 FPS on 4K Ultra settings?
A: No. The measured average FPS for 4K Ultra is 52 FPS, which is below the 60 FPS threshold. The 4K High setting achieves 68 FPS average, so dropping from Ultra to High is necessary for a consistent 60 FPS experience at 4K.
Q: What is the best resolution for this combination in Palworld?
A: The data shows that 1440p High provides a strong balance, with an average of 123 FPS. This is well above 60 FPS and leaves headroom for demanding scenes. At 1080p, the CPU limits performance, and at 4K, the GPU becomes the bottleneck.
Q: Is the Ryzen 5 2600 bottlenecking the RTX 5070 Ti in Palworld?
A: Yes, particularly at 1080p. The 1080p Low result of 211 FPS is the highest in the dataset, and the relatively small FPS differences between Low, Medium, and High at 1080p suggest the CPU is reaching its limit. At 1440p and 4K, the GPU becomes the primary limiting factor.
Q: How does the RTX 5070 Ti compare to its nearest rivals based on benchmark scores?
A: The RTX 5070 Ti's average benchmark score is 49957, which is 0.1% slower than the AMD Radeon RX Vega 64, 0.4% faster than the Intel Arc A550M, 2% faster than the AMD Radeon RX 6900 XT, and 3.1% faster than the AMD Radeon RX 6800 XT.
Q: What is the lowest FPS recorded for this combo at 4K?
A: The only min FPS recorded at 4K is for Medium settings, which shows a minimum of 75 FPS. For High, Low, and Ultra settings at 4K, min FPS values are not provided in the data.
Q: Does the CPU's performance percentile affect Palworld results?
A: The Ryzen 5 2600 is in the 75th percentile of all CPUs, which means it outperforms 75% of tested processors. However, its single-thread score of 2239 in Passmark suggests that Palworld's CPU-heavy scenes may cause frame dips, though the measured min FPS values at 1080p Medium (166) and 1440p Medium (136) remain playable.
How This Combo Ranks
The AMD Ryzen 5 2600 + NVIDIA GeForce RTX 5070 Ti combination ranks 679th out of 3711 tested combos in Palworld, placing it in the top 18.3% of all pairings tested. This rank reflects the system's ability to deliver high frame rates at popular resolutions, with the 1440p Medium result of 160 FPS and 1080p High result of 178 FPS being particularly strong outcomes.
The rank is notable because the CPU is an older budget part from 2018, while the GPU is a current-generation flagship-class card. The data suggests that the combo's placement is driven primarily by the GPU's performance, as the CPU's limitations at 1080p prevent the system from reaching even higher frame rates. The 679th rank out of 3711 means that there are 678 combos that perform better, likely featuring newer CPUs with stronger single-thread performance that can better feed high-end GPUs.
The disparity between the CPU's 75th percentile ranking and the GPU's 86th percentile ranking (with the GPU being 11 percentile points higher) indicates that the combo is not perfectly balanced. In Palworld, this imbalance manifests at 1080p, where the CPU holds back the GPU, but at 1440p and 4K, the combo delivers results that justify its overall ranking. The 4K High result of 68 FPS and 4K Medium result of 89 FPS show that this pairing can handle 4K gaming, which is a significant achievement for a system with a CPU that launched in 2018.
Measured FPS Breakdown
The measured FPS data for Palworld with the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 5070 Ti is as follows:
1080p (1920x1080):
- Low: 211 FPS average
- Medium: 196 FPS average, 166 FPS min, 225 FPS max
- High: 178 FPS average
- Ultra: 141 FPS average
1440p (2560x1440):
- Low: 184 FPS average
- Medium: 160 FPS average, 136 FPS min, 184 FPS max
- High: 123 FPS average
- Ultra: 93 FPS average
4K (3840x2160):
- Low: 109 FPS average
- Medium: 89 FPS average, 75 FPS min, 102 FPS max
- High: 68 FPS average
- Ultra: 52 FPS average
The 1080p results show the CPU limiting factor, with the difference between Low and Ultra being 70 FPS. At 1440p, the spread between Low and Ultra expands to 91 FPS, indicating the GPU is taking on more work. At 4K, the spread grows further to 57 FPS between Low and Ultra, but the absolute values drop significantly, showing that the GPU's rendering workload dominates at this resolution.
The Medium settings across all resolutions provide the most complete picture, with min and max values. The 1080p Medium min of 166 FPS and max of 225 FPS shows a 59 FPS variance, while the 1440p Medium min of 136 FPS and max of 184 FPS shows a 48 FPS variance. The 4K Medium min of 75 FPS and max of 102 FPS shows a 27 FPS variance, which is tighter in relative terms but still represents a significant frame rate range during gameplay.
For players targeting specific frame rates, the data shows that 1440p Ultra (93 FPS) and 4K High (68 FPS) are achievable with this combo, while 4K Ultra (52 FPS) falls below the 60 FPS target. The 1080p results are all above 140 FPS, making this resolution suitable for high-refresh-rate monitors, though the CPU limits the maximum achievable frame rate.
Hardware Specifications
AMD Ryzen 5 2600
NVIDIA GeForce RTX 5070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce RTX 5070 Ti in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 109.0 |
| 3840x2160 | Medium | 89.0 |
| 3840x2160 | High | 68.0 |
| 3840x2160 | Ultra | 52.0 |
| 2560x1440 | Low | 184.0 |
| 2560x1440 | Medium | 160.0 |
| 2560x1440 | High | 123.0 |
| 2560x1440 | Ultra | 93.0 |
| 1920x1080 | Low | 211.0 |
| 1920x1080 | Medium | 196.0 |
| 1920x1080 | High | 178.0 |
| 1920x1080 | Ultra | 141.0 |
Palworld with Ryzen 5 2600 + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RTX 5070 Ti + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with Ryzen 5 2600 + RTX 5070 Ti
Explore FPS benchmarks for other games using this same hardware combination.