Overpower

Overpower

AVERAGE FPS
108
good

This combination provides smooth gameplay with an average of 108 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 70 81 85 138
1440p QHD 79 92 101 163
1080p Full HD 90 104 112 183

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 138
3840x2160 Medium 85
3840x2160 High 81
3840x2160 Ultra 70
2560x1440 Low 163
2560x1440 Medium 101
2560x1440 High 92
2560x1440 Ultra 79
1920x1080 Low 183
1920x1080 Medium 112
1920x1080 High 104
1920x1080 Ultra 90

Overpower with Intel Core Ultra 7 265K + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis

The Intel Core Ultra 7 265K paired with the NVIDIA GeForce RTX 3070 Ti is a 1080p and 1440p powerhouse in Overpower, but 4K Ultra is its breaking point. The measured data shows a clear pattern: at 1080p Low, the combo delivers 182.5 FPS, but dropping to 4K Ultra cuts that to 69.7 FPS. This is a GPU-bound scenario at higher resolutions, while the CPU’s 20 cores and 5.50 GHz boost clock keep frame rates high at lower settings.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and tells a clear story about which component is the limiting factor. At High settings, moving from 1920x1080 (103.6 FPS) to 2560x1440 (92.3 FPS) is a modest 11 FPS loss, but going to 3840x2160 (80.9 FPS) costs another 11.4 FPS. That’s a 22.7 FPS total reduction from 1080p to 4K at High, which is significant but not catastrophic.

The scaling is far more dramatic at Ultra settings. The 1080p Ultra result of 90 FPS drops to 79 FPS at 1440p, then plummets to 69.7 FPS at 4K. That’s a 20.3 FPS loss from 1080p to 4K, representing a 22.6% reduction. This indicates the RTX 3070 Ti’s 8 GB of GDDR6X memory and 608.3 GB/s bandwidth are being saturated at 4K Ultra, where the pixel rate of 169.9 GPixel/s struggles to keep up with demand.

Low settings show the least resolution sensitivity, with 182.5 FPS at 1080p, 163 FPS at 1440p, and 137.9 FPS at 4K. The 1080p-to-4K drop of 44.6 FPS is the largest absolute loss, but the percentage drop (24.4%) is similar to High settings. This suggests that even at Low, the GPU is the primary bottleneck at 4K, while the CPU’s 20 threads handle the frame generation without issue.

The key takeaway: at 1080p and 1440p, the Intel Core Ultra 7 265K provides enough headroom to push the RTX 3070 Ti to its limits, but at 4K, the GPU’s 8 GB VRAM and Ampere architecture become the limiting factor. The 3 nm Arrow Lake CPU is never the constraint in this title.

FAQ

Q: What is the best resolution to play Overpower with this combo?

A: The data shows 2560x1440 at High settings delivers 92.3 FPS, which is smooth and visually rich. At 1080p High, you get 103.6 FPS, but 4K High drops to 80.9 FPS, making 1440p the sweet spot for balanced quality and performance.

Q: How much FPS do you gain from Low to Ultra at 1080p?

A: The measured spread is 182.5 FPS at Low versus 90 FPS at Ultra, a difference of 92.5 FPS. This shows Ultra settings impose a 50.7% penalty over Low, which is substantial for a competitive action title.

Q: Is the RTX 3070 Ti’s 8 GB VRAM enough for 4K in Overpower?

A: At 4K Ultra, the combo averages 69.7 FPS, which is playable but below the 80 FPS threshold many gamers prefer. The 8 GB GDDR6X memory appears to be a limiting factor, as the 4K Medium result (85.4 FPS) is only slightly better than 4K High (80.9 FPS), suggesting VRAM pressure at higher settings.

Q: How does the CPU compare to its nearest rivals in overall benchmarks?

A: The Intel Core Ultra 7 265K scores 79102 on average, which is 0.2% behind the Intel Core Ultra 7 265KF and Intel Core i9-14900KF, and 0.9% behind the Intel Core i9-14900K. This places it in the 97th percentile of all CPUs, showing it is a top-tier processor for gaming.

Q: What is the GPU’s benchmark percentile ranking?

A: The RTX 3070 Ti sits in the 74th percentile of all GPUs with an average score of 30849. Its nearest rival, the AMD Radeon RX 590 GME, scores 30755 (0.3% ahead), while the AMD Radeon RX 6700 is 0.8% behind at 31112.

Q: Does the combo rank well among all tested configurations?

A: In Overpower, this combo ranks 699 out of 1744 tested combos, placing it in the top 40% of all configurations. This is a strong showing, but the data suggests other GPU pairings with this CPU could achieve higher frame rates at 4K.

Settings Recommendations

For the best experience, the measured data points to 1440p High as the optimal balance. At 2560x1440 High, the combo delivers 92.3 FPS, which is smooth for action gameplay. Dropping to Medium yields 100.8 FPS at the same resolution, a modest 8.5 FPS gain, while Low jumps to 163 FPS. The Ultra preset at 1440p (79 FPS) is the only setting below 80 FPS, so it should be avoided for competitive play.

At 1080p, High settings at 103.6 FPS offer a great experience, but if you want the highest frame rates, Low at 182.5 FPS is the clear choice. The Medium preset (112 FPS) is a reasonable middle ground, but the 8.4 FPS difference between Medium and High is small enough that High is the better visual investment.

4K is viable only at Low (137.9 FPS) or Medium (85.4 FPS). High at 80.9 FPS is borderline, and Ultra at 69.7 FPS is too low for a fast-paced action title. The data suggests that 4K Medium is the minimum acceptable setting for this combo, and even then, you are trading visual fidelity for playability.

The best overall preset is 1440p High, as it provides a 92.3 FPS average while retaining visual quality. For those prioritizing frame rate above all, 1080p Low at 182.5 FPS is the maximum performance setting, but it sacrifices most visual effects.

How This Combo Ranks

The combo ranks 699 out of 1744 tested combinations in Overpower, placing it in the 60th percentile or better. This is a respectable position, but the data indicates that the CPU is not the limiting factor. The Intel Core Ultra 7 265K is in the 97th percentile of all CPUs, while the RTX 3070 Ti is only in the 74th percentile of all GPUs. This imbalance means the GPU is holding back the system in GPU-intensive scenarios like 4K Ultra.

Compared to other combos, this pairing is likely outperformed by systems with higher-tier GPUs but similar CPUs. The 699th rank out of 1744 suggests there are roughly 1045 combos that perform worse, but also 698 that perform better. The GPU’s 8 GB VRAM and 21.75 TFLOPS of FP32 performance are adequate for 1080p and 1440p, but the 4K results show the system’s ceiling.

The CPU’s nearest rival, the Intel Core Ultra 7 265KF, scores 79240 on average (0.2% higher), meaning this combo would perform nearly identically with that chip. The GPU’s nearest rival, the AMD Radeon RX 590 GME, is 0.3% ahead, so swapping in a different GPU at this performance tier would have minimal impact on the rank.

GPU Role

The RTX 3070 Ti is the defining component in this combo’s 4K performance. Its 8 GB of GDDR6X memory on a 256-bit bus provides 608.3 GB/s of bandwidth, but the data shows this is insufficient for Ultra settings at 3840x2160. The 69.7 FPS at 4K Ultra is the lowest measured result, and the 85.4 FPS at 4K Medium suggests that VRAM capacity, not just bandwidth, is the limiting factor.

The GPU’s base clock of 1575 MHz and boost clock of 1770 MHz are modest by modern standards, but the 6144 shading units and 192 TMUs provide substantial compute power. The 21.75 TFLOPS of FP32 performance is what drives the 137.9 FPS at 4K Low, showing that raw compute is strong when memory is not the bottleneck.

The 74th percentile ranking for the GPU, with an average benchmark score of 30849, places it near the AMD Radeon RX 6700 (31112, 0.8% behind). In Overpower, the RTX 3070 Ti’s 8 GB VRAM is a clear weakness at 4K Ultra, as the 90 FPS at 1080p Ultra versus 69.7 FPS at 4K Ultra represents a 22.6% drop that cannot be offset by the CPU’s power.

Measured FPS Breakdown

At 1920x1080, the combo produces 182.5 FPS at Low, 112 FPS at Medium, 103.6 FPS at High, and 90 FPS at Ultra. The spread from Low to Ultra is 92.5 FPS, with each settings tier costing roughly 10-20 FPS. The 1080p results show a clear GPU bottleneck at Ultra, as the drop from High to Ultra is 13.6 FPS, larger than the Medium-to-High gap of 8.4 FPS.

At 2560x1440, the numbers are 163 FPS at Low, 100.8 FPS at Medium, 92.3 FPS at High, and 79 FPS at Ultra. The 1440p results show a similar pattern to 1080p, but with lower absolute values. The Low-to-Medium gap is 62.2 FPS, which is substantial, while the High-to-Ultra gap is 13.3 FPS, indicating diminishing returns at higher settings.

At 3840x2160, the combo delivers 137.9 FPS at Low, 85.4 FPS at Medium, 80.9 FPS at High, and 69.7 FPS at Ultra. The 4K results are the most telling: the Low-to-Medium gap is 52.5 FPS, but the Medium-to-High gap is only 4.5 FPS. This suggests that Medium settings are the practical ceiling for 4K, as High provides minimal visual improvement for a significant performance cost.

The overall data shows that the combo is most efficient at 1440p High, where the 92.3 FPS average is close to the 1080p High result of 103.6 FPS, but with better image quality. The 4K Ultra result of 69.7 FPS is the only measurement below 70 FPS, making it the least desirable configuration.

CPU Role

The Intel Core Ultra 7 265K is a 20-core, 20-thread processor with a base clock of 3.90 GHz and a boost clock of 5.50 GHz. Its 30 MB of shared L3 cache and 102.4 GB/s of memory bandwidth provide ample headroom for Overpower’s action sequences. The CPU’s 97th percentile ranking, with an average benchmark score of 79102, shows it is among the fastest processors available, but the game data reveals it is not the bottleneck.

At 1080p Low, the combo hits 182.5 FPS, which is near the RTX 3070 Ti’s practical limit. The CPU’s 20 threads handle the game’s physics and AI without issue, as evidenced by the 137.9 FPS at 4K Low. The CPU’s single-thread performance, measured at 7060 in Cinebench R23 single-core, is strong enough to avoid frame rate dips in demanding scenes.

The data shows that the CPU’s performance is consistent across all resolutions, meaning the FPS drops are entirely attributable to the GPU. The 5.50 GHz boost clock allows the CPU to feed the GPU at 1080p, but at 4K, the GPU’s 8 GB VRAM and 1770 MHz boost clock become the limiting factor. The CPU’s 125 W TDP is modest, but the 20 cores ensure it never becomes a bottleneck in this title.

Hardware Specifications

Intel Core Ultra 7 265K

Cores / Threads 20 / 20
Base Clock 3900 MHz
Boost Clock 5500 MHz
TDP 125W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce RTX 3070 Ti

VRAM 8 GB GDDR6X
Base Clock —
Boost Clock 1770 MHz MHz
TDP 290 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 7 265K + NVIDIA GeForce RTX 3070 Ti in Overpower

Resolution Settings Avg FPS
3840x2160 Low 137.9
3840x2160 Medium 85.4
3840x2160 High 80.9
3840x2160 Ultra 69.7
2560x1440 Low 163.0
2560x1440 Medium 100.8
2560x1440 High 92.3
2560x1440 Ultra 79.0
1920x1080 Low 182.5
1920x1080 Medium 112.0
1920x1080 High 103.6
1920x1080 Ultra 90.0

Overpower with iUltra 7 265K + Other GPUs

See how Overpower performs with the same CPU but different graphics cards.

Overpower with RTX 3070 Ti + Other CPUs

See how Overpower performs with the same GPU but different processors.

Other Games with iUltra 7 265K + RTX 3070 Ti

Explore FPS benchmarks for other games using this same hardware combination.