Overpower

# Overpower with Intel Core Ultra 7 265K + NVIDIA GeForce RTX 5060

The Intel Core Ultra 7 265K paired with the NVIDIA GeForce RTX 5060 delivers a consistent 60-164 FPS experience across Overpower's four settings presets and three resolutions, with the data revealing a system that scales predictably but shows its limitations at higher visual fidelity. This combination ranks 1643rd out of 3713 tested GPU-CPU pairings in Overpower, placing it in the upper-middle tier of the benchmark database.

Resolution Scaling

The measured FPS data shows a clear and consistent pattern: as resolution increases from 1920x1080 to 3840x2160, average frame rates drop by roughly 23-28% at each step, depending on the preset. At Low settings, the system delivers 164 FPS at 1080p, drops to 146 FPS at 1440p, and falls to 124 FPS at 4K — a total reduction of 24.4% from 1080p to 4K. This relatively modest scaling gap suggests the CPU remains a strong contributor even at lower resolutions, though the GPU increasingly becomes the bottleneck as pixel count rises.

The High preset tells a similar story: 95 FPS at 1080p, 85 FPS at 1440p, and 72 FPS at 4K. The percentage drop from 1080p to 4K here is 24.2%, almost identical to the Low setting's scaling. Medium settings show 102 FPS at 1080p, 91 FPS at 1440p, and 77 FPS at 4K, with a 24.5% total reduction. Ultra settings compress the range further: 79 FPS at 1080p, 70 FPS at 1440p, and 60 FPS at 4K — a 24.1% drop from top to bottom.

What's revealing is that the scaling penalty is nearly uniform across all presets, hovering around 24%. This consistency indicates that the RTX 5060's 8 GB GDDR7 memory and 128-bit bus are not suddenly overwhelmed at 4K; rather, the frame rate declines track a predictable rendering-load curve. The data implies that Overpower is not unusually memory-hungry at higher resolutions, and the GPU's 448.0 GB/s bandwidth appears sufficient to feed the rendering pipeline without abrupt cliffs. However, the fact that 4K Ultra lands at exactly 60 FPS average suggests the combination is hitting a practical ceiling — barely playable for smooth action, but not dipping below that threshold.

How This Combo Ranks

With a combo rank of 1643 out of 3713 tested pairings, this system sits at the 55.7th percentile of all CPU-GPU combinations tested in Overpower. That places it squarely in the upper-middle range — not a top-tier enthusiast setup, but comfortably ahead of more than half of the database's tested configurations. The ranking implies that users with this pairing can expect solid, if not spectacular, performance relative to the broader hardware landscape.

The GPU's individual percentile ranking at 72nd among all GPUs is notably higher than the combo's overall percentile, suggesting the CPU is holding the pairing back somewhat in this title. The Intel Core Ultra 7 265K, with its 20 cores and 20 threads, posts a 94th percentile score across all CPUs in general benchmarks, but its average benchmark score of 70879 places it in a tight cluster with rivals. The nearest rival, the Intel Xeon 6511P, scores 71051 (a -0.2% delta), while the Intel Xeon Platinum 8270 scores 71370 (-0.7%). The AMD Ryzen 7 9700F trails at 69996 (1.3% delta), and the Intel Core i7-14700KF sits at 70163 (1% delta). These minuscule deltas — all within 1.3% — indicate that the 265K's CPU performance is not a differentiator in this game; instead, the RTX 5060's mid-pack GPU showing likely defines the combo's overall position.

GPU Role

The RTX 5060's specifications explain much of its behavior in Overpower. Built on the Blackwell 2.0 architecture with a 5 nm process, the GPU packs 3840 shading units, 120 texture mapping units, and 48 raster output units. Its 30 RT cores and 120 tensor cores provide modern feature support, but the 8 GB GDDR7 memory on a 128-bit bus with 448.0 GB/s bandwidth is the key constraint for this title. The 1750 MHz memory clock (28 Gbps effective) and 2497 MHz boost clock deliver a theoretical FP32 throughput of 19.18 TFLOPS, which translates to playable frame rates at all tested settings.

The GPU's benchmark profile shows a 72nd percentile ranking among all GPUs, with an average benchmark score of 26331. Its nearest rivals in the database — the AMD Radeon 860M (26401, -0.3%), NVIDIA GeForce MX550 (26421, -0.3%), and AMD Radeon RX 5700 XT 50th Anniversary (26553, -0.8%) — all cluster within a single percentage point. Notably, the AMD Radeon RX 6750 XT scores 26011, putting the RTX 5060 1.2% ahead. This tight grouping suggests that Overpower's rendering workload does not heavily favor any particular GPU architecture; the RTX 5060's performance is representative of its class rather than exceptional.

The 8 GB memory capacity appears sufficient at 1080p and 1440p across all presets, as frame rates remain stable without severe min-FPS drops in the Medium settings where min/max data was recorded. At 4K Ultra, the average of 60 FPS suggests the GPU is nearing its fill-rate limits, but the absence of min-FPS data for most 4K rows makes it difficult to assess stutter behavior.

Measured FPS Breakdown

At 1920x1080, the system delivers its strongest performance across all presets. Low settings average 164 FPS, which is the highest measured figure in the entire dataset. Medium settings average 102 FPS with a min of 87 and max of 118, indicating smooth frame pacing. High settings average 95 FPS, while Ultra drops to 79 FPS. The spread from Low to Ultra at 1080p is 85 FPS, showing that Overpower's preset scaling has a substantial impact on frame rates when resolution is not the limiting factor.

Moving to 2560x1440, the numbers scale down predictably. Low settings average 146 FPS, Medium averages 91 FPS (min 77, max 105), High averages 85 FPS, and Ultra averages 70 FPS. The delta between Low and Ultra shrinks to 76 FPS, reflecting the increased pixel burden on the GPU. The Medium preset's min FPS of 77 at 1440p is worth noting — it indicates that even at this mid-tier preset, occasional dips occur that could be noticeable on high-refresh-rate displays.

At 3840x2160, the system's limits become apparent. Ultra settings average exactly 60 FPS, which is the minimum playable threshold for many action games. High settings average 72 FPS, Medium averages 77 FPS (min 66, max 89), and Low jumps to 124 FPS. The Low preset's 124 FPS at 4K is surprisingly strong, suggesting that Overpower's low settings substantially reduce rendering complexity (likely texture detail and shadow quality) rather than just resolution-dependent effects. The Medium preset's min FPS of 66 at 4K shows that even moderate settings can cause frame dips below the average, though the 66 FPS floor remains acceptable.

Settings Recommendations

Based on the measured rows, the Medium preset at 2560x1440 offers the best balance of visual fidelity and performance for most users. The 91 FPS average with a 77 FPS minimum keeps frame times stable, and the 105 FPS maximum shows headroom for less demanding scenes. At 1080p, Medium at 102 FPS (min 87, max 118) is equally compelling, providing a smooth experience on standard 144 Hz monitors. For players prioritizing frame rate over visuals, Low at 1080p delivers 164 FPS, which exceeds the capabilities of all but the fastest refresh-rate displays.

At 4K, the choice depends on tolerance for reduced settings. Ultra at 60 FPS is technically playable but leaves no margin for demanding scenes; Medium at 77 FPS (min 66, max 89) is the safer pick for 4K users who want consistent performance. High at 72 FPS sits between these two, but the lack of min/max data for that preset makes its stability uncertain. The data suggests that 4K Ultra is a marginal experience, while 4K Medium provides a more comfortable cushion above the 60 FPS threshold.

FAQ

Q: Can this system run Overpower at 4K Ultra settings?

A: Yes, but only at an average of 60 FPS, which leaves no headroom for complex scenes. The Medium preset at 4K averages 77 FPS with a 66 FPS minimum, making it the better recommendation for consistent 4K play.

Q: What is the highest frame rate this combination achieves?

A: The maximum measured average is 164 FPS at 1920x1080 with Low settings. The highest recorded max FPS is 118, observed at 1080p Medium.

Q: How does this combo rank relative to other tested systems in Overpower?

A: It ranks 1643rd out of 3713 tested combinations, placing it in the upper-middle tier. The RTX 5060's 72nd-percentile GPU ranking is higher than the combo's overall percentile, suggesting the CPU slightly limits the pairing.

Q: Does the 8 GB VRAM cause issues at higher resolutions?

A: The data does not indicate VRAM-related stutters or crashes. The Medium preset shows min FPS of 66 at 4K, which is stable. The 448.0 GB/s bandwidth appears sufficient for Overpower's demands.

Q: What CPU rival is closest to the Intel Core Ultra 7 265K in performance?

A: The Intel Xeon 6511P is the nearest rival with an average benchmark score of 71051, just 0.2% ahead of the 265K's 70879. The Intel Xeon Platinum 8270 is 0.7% ahead, while the AMD Ryzen 7 9700F trails by 1.3%.

Q: Is there a measurable difference between Low and Ultra presets at 1080p?

A: Yes, the gap is substantial: 164 FPS on Low versus 79 FPS on Ultra, a difference of 85 FPS. This indicates that Overpower's preset scaling heavily impacts rendering load beyond just resolution changes.

CPU Role

The Intel Core Ultra 7 265K is a 20-core, 20-thread processor built on the Arrow Lake architecture at a 3 nm process node. Its base clock of 3.90 GHz boosts to 5.50 GHz, and it carries 30 MB of shared L3 cache along with 3 MB of L2 cache per core. The CPU's 94th-percentile ranking across all processors, with an average benchmark score of 70879, indicates strong general-purpose performance. In Overpower, the CPU's role becomes evident when examining the resolution scaling data.

At 1080p Low, the system hits 164 FPS, which is high enough that CPU limitations could theoretically cap performance. However, the consistent ~24% drop from 1080p to 4K across all presets suggests the CPU is not a bottleneck at any resolution — if it were, the scaling would flatten at higher resolutions as the GPU became the sole limiter. Instead, the linear degradation points to the RTX 5060 being the primary constraint throughout.

The CPU's nearest rival comparisons show negligible performance deltas, meaning the 265K is not giving this combo any meaningful advantage over alternative processors. The 20 cores and 20 threads are more than sufficient for Overpower's action-game workload, and the 5.50 GHz boost clock ensures strong single-thread performance. The CPU's DDR5 memory support with 102.4 GB/s bandwidth also provides ample data throughput for the GPU, though the 128-bit GPU memory bus remains the more restrictive path. In this pairing, the CPU is clearly not the limiting component — the benchmark data consistently points to the GPU as the determining factor for frame rates, particularly at higher resolutions and presets.