Archeage

Archeage

AVERAGE FPS
91
good

This combination provides smooth gameplay with an average of 91 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 28 40 65 71
1440p QHD 52 73 111 121
1080p Full HD 73 112 165 183

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 71
3840x2160 Medium 65
3840x2160 High 40
3840x2160 Ultra 28
2560x1440 Low 121
2560x1440 Medium 111
2560x1440 High 73
2560x1440 Ultra 52
1920x1080 Low 183
1920x1080 Medium 165
1920x1080 High 112
1920x1080 Ultra 73

Archeage with Intel Core Ultra 7 265K + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis

Archeage, a 2014 MMORPG, exhibits a pronounced sensitivity to resolution and graphics settings when paired with the Intel Core Ultra 7 265K and NVIDIA GeForce RTX 3070 Ti. The measured frame rates across the tested configurations reveal a system where the graphics card becomes the primary constraint at higher resolutions, while the processor's substantial thread count ensures headroom at lower ones. The data indicates a performance curve that degrades predictably with increased pixel count, but the degree of that degradation is heavily modulated by the chosen preset.

Resolution Scaling

The transition from 1080p to 4K produces a dramatic reduction in average frame rates, underscoring the RTX 3070 Ti’s workload at higher pixel densities. At the High preset, the measured average FPS drops from 112.4 at 1920x1080 to 73.2 at 2560x1440, and finally to 39.9 at 3840x2160. This represents a 64.5% performance loss from 1080p to 4K, a steep decline that clearly points to the GPU as the limiting component at the highest resolution. The scaling is not linear; the step from 1440p to 4K costs roughly 45% of the 1440p frame rate, whereas the step from 1080p to 1440p costs about 35%, indicating that the render target’s pixel count is outpacing the GPU’s bandwidth and shading capabilities.

At the Low preset, the same resolution steps show a different pattern. The average FPS at 1080p is 182.8, which falls to 120.8 at 1440p and 70.6 at 4K. The 1080p-to-1440p drop is 34%, but the 1440p-to-4K drop is 41.5%. While the GPU still dominates the scaling, the absolute frame rates at 1080p and 1440p suggest that the CPU is capable of feeding the GPU enough data to maintain high performance, but the GPU still becomes the bottleneck as the pixel count rises. The Ultra preset, by contrast, collapses much earlier: 72.7 FPS at 1080p, 52.0 at 1440p, and just 28.0 at 4K. This shows that the highest settings impose a rendering cost that overwhelms the GPU even at 1080p, making the resolution scaling less about the CPU and more about the sheer fill-rate and pixel-shading demands of Ultra.

The data suggests that for this combination, 1440p is the practical ceiling for maintaining a smooth experience on High or lower settings. At 4K, even the Medium preset (64.6 FPS) and Low preset (70.6 FPS) struggle to hit 60 FPS averages, and High falls to 39.9 FPS. This is a clear sign that the RTX 3070 Ti’s 8 GB GDDR6X memory and 608.3 GB/s bandwidth, while capable at lower resolutions, are not sufficient to sustain high frame rates at 4K in this title without significant preset compromises.

CPU Role

The Intel Core Ultra 7 265K is a 20-core, 20-thread processor based on the Arrow Lake architecture, with a base clock of 3.90 GHz and a boost clock of 5.50 GHz. Its benchmark results are strong, with a Cinebench R23 multi-core score of 50009 and a single-core score of 7060, placing it in the 97th percentile of all CPUs. In Archeage, the CPU’s role is evident in the frame rate headroom observed at lower resolutions. At 1080p Low, the system achieves 182.8 FPS, which is a high value that suggests the processor is not the primary limiter; the GPU is still doing the majority of the work, but the CPU is keeping up with the game’s draw calls and physics updates.

The processor’s 30 MB of shared L3 cache and dual-channel DDR5 memory support (102.4 GB/s bandwidth) likely contribute to the smooth delivery of data to the GPU. However, the measured FPS at 1440p and 4K shows that the CPU’s influence diminishes as the resolution increases. For instance, at 1440p High, the system hits 73.2 FPS, which is a 35% drop from 1080p High, and at 4K High, it drops to 39.9 FPS. This scaling pattern is classic GPU-bound behavior, where the CPU’s performance ceiling is far above what the GPU can deliver at higher pixel counts.

Compared to its nearest rivals, the 265K holds its own. The data shows it is 0.2% behind the Intel Core Ultra 7 265KF and 0.2% behind the Intel Core i9-14900KF in average benchmark score, and 0.9% behind the Intel Core i9-14900K. These minuscule deltas indicate that the 265K’s multi-threaded performance is effectively on par with those high-end parts, which means in Archeage, the CPU is unlikely to be the differentiating factor between these combos at any resolution. The 20 cores and 20 threads are more than sufficient for an MMORPG that may have many player characters on screen, but the bottleneck remains firmly on the GPU side for most of the measured configurations.

GPU Role

The NVIDIA GeForce RTX 3070 Ti, based on the Ampere architecture and GA104 chip, has 6144 shading units, 192 texture mapping units, and 96 ROPs. Its 8 GB of GDDR6X memory runs at 19 Gbps effective, providing 608.3 GB/s of bandwidth. The GPU’s benchmark scores are solid, with a Passmark G3D score of 23356 and a 3DMark Steel Nomad DX12 score of 3478, placing it in the 74th percentile of all GPUs. In Archeage, the GPU’s role is dominant, as evidenced by the sharp FPS drops when moving from 1080p to 4K.

At 1080p, the GPU is clearly the limiting factor at Ultra, where it only manages 72.7 FPS. This is a substantial drop from the High preset’s 112.4 FPS, indicating that the Ultra settings likely increase shadow complexity, texture filtering, and post-processing effects that tax the shading units and memory bandwidth. The 8 GB VRAM capacity is not likely exceeded at 1080p, but the 256-bit bus width and 608.3 GB/s bandwidth are strained by higher quality textures and effects. At 1440p, the same pattern holds: High produces 73.2 FPS, but Ultra drops to 52.0 FPS, a 29% reduction. At 4K, the GPU’s limitations become severe, with Ultra at 28.0 FPS and High at 39.9 FPS, both well below playable thresholds for most users.

The GPU’s relative performance versus its nearest rivals is noteworthy. The data shows the RTX 3070 Ti is 0.3% ahead of the AMD Radeon RX 590 GME, 0.8% behind the AMD Radeon RX 6700, and 0.9% behind the NVIDIA Quadro M5000 in average benchmark score. These small deltas are surprising given the architectural differences, but they suggest that in pure aggregate benchmarks, the 3070 Ti is not dramatically faster than these older or lower-tier cards. In Archeage, this means the GPU’s raw compute and memory bandwidth are just adequate for 1440p gaming but insufficient for 4K at higher presets. The pixel rate of 169.9 GPixel/s and texture rate of 339.8 GTexel/s are the key specs that determine how quickly the GPU can fill the screen, and the measured FPS at 4K indicates those rates are being saturated.

How This Combo Ranks

The combination of the Intel Core Ultra 7 265K and NVIDIA GeForce RTX 3070 Ti ranks 670th out of 1727 tested combos in Archeage, placing it in the top 38.8% of all configurations. This is a respectable position, but not a top-tier one, reflecting the GPU’s mid-range status in the current market. The rank suggests that while the CPU is high-performing (97th percentile), the GPU’s 74th percentile score drags the overall combo down, as the game is heavily GPU-bound at the resolutions tested.

Compared to other combos that might pair the 265K with a stronger GPU, this pairing would likely fall short in 4K scenarios, but it remains competitive at 1080p and 1440p. The data shows that the combo’s frame rates are sufficient for smooth gameplay at 1080p High (112.4 FPS) and 1440p High (73.2 FPS), but the 4K High result of 39.9 FPS is below the 60 FPS threshold that many users consider acceptable. The rank of 670 out of 1727 indicates that there are many faster combinations, but also a significant number that are slower, making this a middle-of-the-pack performer for Archeage specifically.

The combo’s ranking is likely influenced by the fact that Archeage, as a 2014 MMORPG, may not be highly optimized for multi-core processors, but the 265K’s strong single-core performance (Cinebench R23 single-core score of 7060) helps maintain high frame rates at lower resolutions. The GPU’s 8 GB memory and 608.3 GB/s bandwidth are adequate for 1440p, but not for 4K, which is a common limitation for this class of graphics card. Overall, this combo is a balanced mid-range setup that excels at 1080p and handles 1440p well, but it is not built for 4K gaming at high or ultra settings.

Settings Recommendations

Based on the measured frame rates, the optimal experience for this combo depends on the target resolution. At 1920x1080, the High preset delivers 112.4 FPS, which is well above the 60 FPS threshold and provides a smooth, visually rich experience. The Medium preset offers 164.9 FPS, which is a significant boost for competitive play, but the visual fidelity loss may not be worth it for most users. The Low preset at 1080p (182.8 FPS) is excessive for a game like Archeage, unless the user has a very high refresh rate monitor (e.g., 165Hz or higher) and wants to maximize responsiveness. Ultra at 1080p (72.7 FPS) is playable but not ideal, as the frame rate is close to the edge of what some users would consider smooth.

At 2560x1440, the High preset is the best choice, producing 73.2 FPS, which is comfortably above 60 FPS and offers a good balance of visual quality and performance. The Medium preset (111.1 FPS) is also viable for users who prefer higher frame rates, but the visual downgrade from High is noticeable in an MMORPG where textures and draw distance matter. The Low preset (120.8 FPS) is only recommended for those chasing maximum frame rates on a high-refresh display. Ultra at 1440p (52.0 FPS) should be avoided, as it falls below 60 FPS and introduces stutter in combat-heavy scenes.

At 3840x2160, the data clearly shows that this combo is not suited for high or ultra settings. The High preset (39.9 FPS) and Ultra preset (28.0 FPS) are both below playable thresholds for most users. The Medium preset (64.6 FPS) is borderline playable, but it requires a significant visual compromise, and the Low preset (70.6 FPS) is the only setting that maintains a frame rate above 60 FPS. For 4K users, the recommendation is to stick with Low or Medium settings, but even then, the experience may not be optimal due to the GPU’s memory bandwidth limitations. The best overall experience for this combo is 1080p High or 1440p High, where the frame rates are high enough to ensure smooth gameplay without sacrificing visual quality.

Hardware Specifications

Intel Core Ultra 7 265K

Cores / Threads 20 / 20
Base Clock 3900 MHz
Boost Clock 5500 MHz
TDP 125W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce RTX 3070 Ti

VRAM 8 GB GDDR6X
Base Clock —
Boost Clock 1770 MHz MHz
TDP 290 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 7 265K + NVIDIA GeForce RTX 3070 Ti in Archeage

Resolution Settings Avg FPS
3840x2160 Low 70.6
3840x2160 Medium 64.6
3840x2160 High 39.9
3840x2160 Ultra 28.0
2560x1440 Low 120.8
2560x1440 Medium 111.1
2560x1440 High 73.2
2560x1440 Ultra 52.0
1920x1080 Low 182.8
1920x1080 Medium 164.9
1920x1080 High 112.4
1920x1080 Ultra 72.7

Archeage with iUltra 7 265K + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RTX 3070 Ti + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with iUltra 7 265K + RTX 3070 Ti

Explore FPS benchmarks for other games using this same hardware combination.