Overpower

The Intel Core Ultra 7 155H paired with the NVIDIA GeForce RTX 5070 Mobile delivers a mid-table result in Overpower, a 2023 action title. Measured frame rates span from 151 fps at 1080p Low to 55 fps at 4K Ultra, with the combo ranking 2054 out of 3713 tested configurations. The CPU and GPU each sit near their closest rivals in synthetic benchmarks, yet the in-game result shows the pairing is only average, so the sections below break down exactly what that means for resolution, settings, and component behavior.

Resolution Scaling

The measured FPS data for Overpower shows a clear downward trend as resolution climbs from 1920x1080 to 3840x2160. At Low settings, the average frame rate moves from 151 fps at 1080p to 135 fps at 1440p and then to 114 fps at 4K. The same pattern holds for the other presets: Medium drops from 94 fps at 1080p to 84 fps at 1440p and 71 fps at 4K; High goes from 87 fps to 78 fps to 66 fps; and Ultra goes from 73 fps to 65 fps to 55 fps. The gap between 1080p and 4K is substantial across every preset, with the Low preset falling 37 fps and the Ultra preset falling 18 fps.

The fact that the 1080p Low average reaches 151 fps while the 4K Low average is 114 fps indicates that the GPU is the limiting component at higher resolutions. If the CPU were the bottleneck, the frame rates would stay similar regardless of resolution. Instead, the drop is consistent with a graphics-bound workload where the RTX 5070 Mobile has to do more pixel work as resolution increases. At 1080p, the CPU has enough headroom to feed the GPU at 151 fps, but that headroom shrinks at 4K, where the GPU becomes the clear constraint.

The 4K Ultra preset is the only measured configuration that falls below 60 fps, averaging 55 fps. That is a notable threshold, but the 4K High preset still averages 66 fps, and the 4K Medium preset averages 71 fps, so the GPU can handle 4K as long as you avoid the most demanding preset. The scaling pattern suggests that the combo is best suited to 1080p and 1440p, where even the Ultra preset stays above 65 fps, while 4K requires a compromise on settings to maintain playable frame rates.

GPU Role

The NVIDIA GeForce RTX 5070 Mobile has 8 GB of GDDR7 memory on a 128-bit bus, delivering 384.0 GB/s of bandwidth. The base clock is 907 MHz, and the boost clock is 1425 MHz, within a 50 W TDP. The GPU also has 4608 shading units, 144 TMUs, 48 ROPs, 36 RT cores, and 144 tensor cores, with FP32 performance of 13.13 TFLOPS. These specs directly explain the measured FPS: the 8 GB frame and 384 GB/s bandwidth are sufficient for the game’s settings, as the highest resolution (4K) still produces playable averages on Medium and High.

The GPU’s benchmark scores put it in the 75th percentile of all GPUs, with an average score of 29928. Its closest rival is the NVIDIA GeForce RTX 3070 Ti, which is 0.1% faster, and the RTX 2080 Ti, which is 0.5% slower. The AMD Radeon RX 6800 is 0.6% slower, and the RX 6700 is 1.7% slower. In Overpower, the GPU’s performance at 4K Ultra (55 fps) aligns with its overall benchmark position, but the fact that it can hit 151 fps at 1080p Low shows that the GPU is capable of far higher frame rates when the resolution is lower.

The 8 GB VRAM is not a limitation in the measured data. The game does not appear to require more than 8 GB at the tested settings, as the 4K Ultra preset still produces an average of 55 fps. The memory bandwidth of 384 GB/s is also adequate; the 128-bit bus does not bottleneck the frame rates, as evidenced by the smooth scaling from 1080p to 1440p. The boost clock of 1425 MHz is modest for a mobile GPU, but the 13.13 TFLOPS FP32 performance is enough to keep Overpower running well above 60 fps at 1080p and 1440p on all presets.

How This Combo Ranks

The Intel Core Ultra 7 155H and RTX 5070 Mobile combo ranks 2054 out of 3713 tested combos in Overpower. That puts it in the lower half of the leaderboard, with 2053 combinations achieving better frame rates. The CPU’s overall percentile is 83rd, and the GPU’s is 75th, but the in-game rank is much lower, which indicates that Overpower does not favor this pairing as much as other titles might.

The CPU’s nearest rival is the Intel Core i5-14600T, which has an average score of 32707 and a delta of 0%, meaning the two are effectively tied. The AMD Ryzen AI 7 PRO 360 is 0.1% behind the CPU, the AMD Ryzen 5 7400F is 0.2% ahead, and the AMD Ryzen 7 PRO 6850H is 0.4% ahead. The GPU’s nearest rival is the RTX 3070 Ti, which is 0.1% faster, and the RTX 2080 Ti, which is 0.5% slower. So both components are competitive with their nearest peers, yet the combo rank is mid-pack.

That disparity indicates that Overpower’s performance is not purely determined by the CPU or GPU in isolation. The game’s engine may rely on other factors, such as the CPU’s 16 cores and 22 threads, or the GPU’s specific feature set, but the benchmark data shows that this pairing lands in the middle of the pack. For a user looking for a top-tier result, the data suggests that other combinations with similar CPU or GPU scores but different pairings may achieve better frame rates in this particular title.

Measured FPS Breakdown

The table below lists all measured frame rate data for Overpower with this combo. The Medium preset includes minimum and maximum values, while the other presets only report averages.

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

| 1920x1080 | Low | 151 | - | - |

| 1920x1080 | Medium | 94 | 80 | 108 |

| 1920x1080 | High | 87 | - | - |

| 1920x1080 | Ultra | 73 | - | - |

| 2560x1440 | Low | 135 | - | - |

| 2560x1440 | Medium | 84 | 71 | 97 |

| 2560x1440 | High | 78 | - | - |

| 2560x1440 | Ultra | 65 | - | - |

| 3840x2160 | Low | 114 | - | - |

| 3840x2160 | Medium | 71 | 61 | 82 |

| 3840x2160 | High | 66 | - | - |

| 3840x2160 | Ultra | 55 | - | - |

At 1080p, the Low preset averages 151 fps, which is the highest measured result in the entire set. Medium averages 94 fps with a minimum of 80 and a maximum of 108, High averages 87 fps, and Ultra averages 73 fps. At 1440p, Low falls to 135 fps, Medium to 84 fps (min 71, max 97), High to 78 fps, and Ultra to 65 fps. At 2160p, the numbers continue to drop: Low averages 114 fps, Medium 71 fps (min 61, max 82), High 66 fps, and Ultra 55 fps.

The Medium preset is the only one with min/max data, and it shows that the frame rate variance is moderate. At 1080p Medium, the minimum of 80 fps is well above the 60 fps threshold, and at 4K Medium, the minimum of 61 fps is still playable. The Ultra preset at 4K is the only configuration that falls below 60 fps on average, which is important for anyone targeting a smooth experience.

FAQ

Q: What is the average frame rate for the 1080p High preset?

A: The 1080p High preset averages 87 fps.

Q: How does the CPU compare to the AMD Ryzen 5 7400F?

A: The Intel Core Ultra 7 155H is 0.2% behind the AMD Ryzen 5 7400F in average benchmark score.

Q: What is the minimum FPS at 4K Medium?

A: The 4K Medium preset has a minimum of 61 fps and a maximum of 82 fps.

Q: What is the GPU’s memory bandwidth?

A: The RTX 5070 Mobile has 384.0 GB/s of memory bandwidth, with 8 GB of GDDR7 memory.

Q: What is the combo rank in Overpower?

A: The combo ranks 2054 out of 3713 tested combinations.

Q: Which preset at 1440p stays above 60 fps?

A: All four 1440p presets average above 60 fps: Low 135, Medium 84, High 78, and Ultra 65.

Settings Recommendations

The measured FPS data provides a clear basis for choosing settings. For a target of 60 fps, the 1080p Ultra preset averages 73 fps, the 1440p Ultra preset averages 65 fps, and the 4K High preset averages 66 fps. All of these are above the 55 fps average of the 4K Ultra preset, so the Ultra preset at 4K is the only configuration that fails to reach 60 fps.

At 1080p, the Ultra preset is the best choice for maximum quality while still maintaining a 73 fps average. The High preset at 87 fps and Medium at 94 fps offer higher frame rates if you prefer a smoother experience, but the Ultra preset is the only one that delivers the highest quality. At 1440p, the Ultra preset averages 65 fps, which is still above 60 fps, so it is the recommended setting for that resolution. The Medium preset at 84 fps is a good alternative if you want more headroom.

At 4K, the situation changes. The Medium preset averages 71 fps, which is the highest average among the 4K settings, and it has a minimum of 61 fps, so it is the best choice for a smooth experience. The High preset averages 66 fps, which is also above 60 fps, but the Medium preset provides a higher average. The Ultra preset at 55 fps is not recommended if you want to stay above 60 fps. Therefore, the best settings per the measured rows are: 1080p Ultra, 1440p Ultra, and 4K Medium. If you prefer higher frame rates at 4K, the High preset is a solid alternative, but the Medium preset offers the best balance of quality and performance.