Overpower

The Intel Core Ultra 5 125H paired with the AMD Radeon 890M is a combination that lands near the bottom of the performance hierarchy for Overpower, ranking 2804th out of 2980 tested combos. The benchmark data indicates this is an integrated-graphics solution that can handle the game at lower settings and resolutions, but it is fundamentally limited by the GPU at higher graphical presets. The measured frame rates across all resolutions and settings never exceed 64 FPS, highlighting a system that is best suited for 1080p gaming with compromises on visual fidelity.

Resolution Scaling

The performance drop from 1920x1080 to 3840x2160 is substantial and clearly points to the GPU as the primary limiting component in this configuration. At Low settings, the average frame rate falls from 64 FPS at 1080p to 57 FPS at 1440p, a reduction of 7 FPS, and then further down to 48 FPS at 4K. This represents a 25% decrease in performance from the lowest to the highest resolution tested at Low settings.

The scaling pattern becomes more pronounced at higher settings. With Medium settings, the average FPS drops from 40 at 1080p to 36 at 1440p and then to 30 at 4K. The High preset shows a similar trajectory: 37 FPS at 1080p, 33 FPS at 1440p, and 28 FPS at 4K. The Ultra settings, which are the most demanding, produce 31 FPS at 1080p, 27 FPS at 1440p, and just 23 FPS at 4K.

The data suggests that the Radeon 890M's 1024 shading units and 32 ROPs are simply overwhelmed as the pixel count increases. The 5.939 TFLOPS of FP32 compute is insufficient to maintain playable frame rates at 4K on any preset above Low. The resolution scaling indicates that the GPU is the bottleneck; the Intel Core Ultra 5 125H, with its 14 cores and 18 threads, is not the constraint here, as the frame rate differences are directly proportional to the rendering load placed on the integrated graphics.

At 1080p, the difference between Low and Ultra settings is 33 FPS (64 down to 31), showing that the GPU has some headroom at the lowest resolution but quickly saturates as the graphical load increases. The move from 1080p to 1440p at Low settings only costs 7 FPS, but the same resolution jump at Ultra settings costs only 4 FPS, suggesting that the GPU is already near its limit at 1440p Ultra. The steepest relative drop occurs when moving from 1440p to 4K at Medium settings, where the average FPS drops from 36 to 30, a 16.7% reduction.

GPU Role

The AMD Radeon 890M is based on the RDNA 3.5 architecture on a 4 nm process from TSMC, with a boost clock of 2900 MHz. The GPU's memory is system-shared, meaning its bandwidth is system-dependent, which is a critical factor for this game's performance. The data shows the GPU's average benchmark score is 9210, placing it in the 45th percentile of all GPUs. This is a mid-range integrated solution, not a discrete gaming card.

The GPU's performance in Overpower reflects its compute capabilities. With 1024 shading units and a pixel rate of 92.80 GPixel/s, the card can produce decent frame rates at 1080p with lower presets. The 64 texture units and 185.6 GTexel/s texture rate help maintain image quality at moderate settings. However, the 32 ROPs limit the fill rate, which becomes a constraint at higher resolutions and settings.

The nearest rivals for the Radeon 890M in the database are the AMD Radeon Vega 8, the NVIDIA GeForce GTX 960, the NVIDIA GeForce GTX 465, and the NVIDIA GeForce GTX 850M. The Radeon 890M's average score is 0.1% below the Vega 8, 0.7% below the GTX 960, 0.9% below the GTX 465, and 1% below the GTX 850M. These are all older or lower-tier parts, confirming the 890M is not a high-performance gaming GPU.

The integrated nature of the 890M means it shares system memory with the CPU, and the "System Shared" memory type and bandwidth are dependent on the overall system configuration. In Overpower, this shared memory architecture likely contributes to the performance limitations observed at higher settings, where the memory bandwidth demands increase. The GPU's 15 W TDP and IGP slot width indicate it is designed for efficiency rather than maximum performance, and the measured FPS data bears this out.

How This Combo Ranks

In the database of tested hardware combinations for Overpower, the Intel Core Ultra 5 125H with the AMD Radeon 890M ranks 2804th out of 2980 combos. This places it in the bottom 6% of tested systems, indicating that the vast majority of other hardware configurations deliver better performance in this game. The rank is a direct reflection of the measured FPS data, which shows the combo struggling to maintain high frame rates even at 1080p.

The CPU itself is not the weak link in this pairing. The Intel Core Ultra 5 125H has an average benchmark score of 27507, placing it in the 79th percentile of all CPUs. Its nearest rivals are the AMD Ryzen 7 5800 (0.1% faster), the Intel Core i5-12600K (0.3% faster), the AMD Ryzen 7 5700X (0.3% faster), and the AMD Ryzen 3 PRO 5355G (0.5% slower). These are all solid desktop processors, and the 125H holds its own against them in general compute tasks.

However, in Overpower, the combo's rank is dragged down by the GPU's performance. The Radeon 890M's 45th percentile ranking among all GPUs, combined with its low average score of 9210, means it cannot keep pace with discrete graphics solutions. The combo rank of 2804 is a clear signal that this system is not intended for high-end gaming, and the measured FPS data confirms that users should expect modest performance.

The deltaPct values for the GPU's rivals are all negative, ranging from -0.1% to -1%, indicating that the Radeon 890M is slightly slower than its closest competitors in the database. This further reinforces the notion that this is a budget-oriented integrated GPU, and its placement in the combo ranking for Overpower reflects its limitations in a demanding action game.

Measured FPS Breakdown

The measured FPS data provides a complete picture of what to expect from this combo across all tested resolutions and settings. At 1920x1080, the system achieves an average of 64 FPS on Low settings, which is the only configuration that exceeds the 60 FPS threshold. The Medium preset drops to 40 FPS, High to 37 FPS, and Ultra to 31 FPS. The Medium setting shows a minimum of 34 FPS and a maximum of 46 FPS, indicating some frame-time variance.

Moving to 2560x1440, the performance degrades across the board. Low settings produce an average of 57 FPS, which is still playable but with less headroom. Medium averages 36 FPS with a range of 30 to 41 FPS, High averages 33 FPS, and Ultra drops to 27 FPS. At this resolution, no setting achieves 60 FPS, and even Low settings are close to the edge of smooth gameplay.

At 3840x2160, the system is clearly out of its depth. Low settings manage an average of 48 FPS, which is playable but not smooth. Medium drops to 30 FPS with a range of 26 to 35 FPS, High averages 28 FPS, and Ultra falls to 23 FPS. These numbers indicate that 4K gaming is not viable with this hardware, as even the lowest settings produce sub-50 FPS averages.

The data also reveals that the gap between Low and Ultra settings narrows as resolution increases. At 1080p, the difference is 33 FPS (64 to 31). At 1440p, the difference is 30 FPS (57 to 27). At 4K, the difference is 25 FPS (48 to 23). This suggests that the GPU is becoming the limiting factor at higher resolutions, where the CPU's ability to feed it frames is less relevant. The only measured row with both minimum and maximum FPS values is the Medium preset at each resolution, providing a range of 12 FPS at 1080p (34-46), 11 FPS at 1440p (30-41), and 9 FPS at 4K (26-35).

FAQ

*Q: What is the highest average FPS this combo can achieve in Overpower?*

A: The highest measured average FPS is 64, achieved at 1920x1080 resolution with Low settings. No other configuration reaches 60 FPS or above.

*Q: Is this combo capable of 4K gaming in Overpower?*

A: The data shows that at 3840x2160, the average FPS ranges from 23 on Ultra settings to 48 on Low settings. These frame rates are below the threshold for smooth gameplay, indicating 4K gaming is not recommended with this hardware.

Q: How does the Radeon 890M compare to its nearest rivals?

A: The Radeon 890M's average benchmark score of 9210 is 0.1% lower than the AMD Radeon Vega 8, 0.7% lower than the NVIDIA GeForce GTX 960, 0.9% lower than the NVIDIA GeForce GTX 465, and 1% lower than the NVIDIA GeForce GTX 850M.

Q: What is the performance difference between Low and Ultra settings at 1080p?

A: At 1920x1080, the average FPS drops from 64 on Low settings to 31 on Ultra settings, a difference of 33 FPS. This represents a 48.4% reduction in average frame rate.

*Q: What is the combo's rank among all tested systems for Overpower?*

A: The combo ranks 2804th out of 2980 tested combinations, placing it in the bottom 6% of all configurations in the database for this game.

Q: Does the CPU or GPU limit performance in this game?

A: The benchmark results indicate the GPU is the limiting component. The Intel Core Ultra 5 125H ranks in the 79th percentile of all CPUs, while the AMD Radeon 890M ranks in the 45th percentile of all GPUs. The FPS scaling with resolution and settings is consistent with GPU-bound performance.

Settings Recommendations

Based on the measured FPS data, the optimal configuration for this combo in Overpower is the Low preset at 1920x1080, which delivers an average of 64 FPS. This is the only setting that provides a smooth, consistently playable experience, as it exceeds the 60 FPS threshold. The Medium preset at 1080p produces an average of 40 FPS, which is playable but may exhibit noticeable stuttering in fast-paced action scenes.

For users who prioritize visual quality over raw frame rate, the Medium preset at 1920x1080 is a reasonable compromise, offering an average of 40 FPS with a minimum of 34 FPS. The High and Ultra presets at 1080p, which average 37 FPS and 31 FPS respectively, are less recommended due to the diminishing returns in visual fidelity relative to the frame rate cost.

At 2560x1440, the Low preset is the only viable option, with an average of 57 FPS. While this is close to 60 FPS, it may not be consistently smooth. The Medium preset at 1440p averages 36 FPS, which is on the edge of playability. The High and Ultra presets at 1440p, averaging 33 FPS and 27 FPS, are not recommended for a responsive gaming experience.

The 3840x2160 resolution should be avoided entirely with this hardware. Even the Low preset at 4K only averages 48 FPS, and the Medium, High, and Ultra presets drop to 30 FPS, 28 FPS, and 23 FPS respectively. These frame rates are too low for an action game like Overpower, where responsiveness is critical.

The data suggests that the ideal experience is achieved by running the game at 1920x1080 with Low settings. This configuration provides the highest average FPS of 64 and ensures the game remains fluid. If a user is willing to accept lower frame rates, the Medium preset at 1080p offers a balance of performance and visual quality, but the Low preset remains the safest choice for consistent gameplay. The benchmark results clearly indicate that this combo is best utilized at lower resolutions and settings, and pushing beyond these limits results in a subpar experience.