Overpower

Overpower, the 2023 action title, presents a demanding workload that clearly separates the performance of the Intel Core i7-14700KF and NVIDIA GeForce RTX 5060 combination. The measured frame rates across resolutions and settings reveal a system that is heavily influenced by graphics load, with the CPU's substantial headroom only becoming apparent at lower graphical presets. This analysis breaks down the benchmark data to show where this combo excels and where its limitations lie.

Resolution Scaling

The transition from 1080p to 4K in Overpower demonstrates a classic GPU-bound scaling pattern, but with a significant twist. At 1080p with Low settings, the combo achieves an average of 161.1 FPS. Moving to 1440p Low drops the average to 147.8 FPS, a reduction of 13.3 FPS. The jump to 4K Low results in 125.3 FPS, which is 35.8 FPS lower than the 1080p result. This indicates that even at Low settings, the resolution increase places a heavy burden on the RTX 5060.

The scaling becomes much more aggressive with higher graphical presets. At Ultra settings, the frame rate plummets from 76.9 FPS at 1080p to 68.8 FPS at 1440p, and finally to a demanding 56.4 FPS at 4K. The data shows that the performance drop from 1080p to 4K is a stark 20.5 FPS at Ultra settings, compared to the 35.8 FPS drop at Low settings. This suggests that while the GPU is the primary limiting factor at 4K, the CPU's role diminishes as the resolution increases, with the graphics card's pixel throughput and memory bandwidth becoming the sole arbiters of performance.

The gap between Low and Ultra settings at the same resolution is also telling. At 1080p, the difference is 84.2 FPS (161.1 vs 76.9), while at 4K, the difference shrinks to 68.9 FPS (125.3 vs 56.4). This compression of the performance envelope at higher resolutions confirms that the system is not CPU-limited in this title; rather, the RTX 5060's capabilities are being saturated. The 8 GB of VRAM and 128-bit memory bus are likely contributing factors to the steep drop-off when moving to 4K, as the higher pixel count demands more memory capacity and bandwidth than the card can efficiently provide.

How This Combo Ranks

In the grand scheme of tested hardware combinations for Overpower, this pairing of the Core i7-14700KF and RTX 5060 holds a rank of 891 out of 1744 combos. This places it in the middle of the pack, a surprising result given the strength of the individual components. The rank suggests that while the CPU is a top-tier performer, the GPU's mid-range positioning holds the combo back from achieving a higher standing in this specific game's benchmark database.

The CPU's individual benchmark percentile is 96, meaning it outperforms 96% of all tested CPUs. This is a clear indicator of its immense processing power, with a Cinebench R23 multi-core score of 44557 and a single-core score of 6290. However, the GPU's percentile is lower at 73, and its average benchmark score of 30109 places it in direct competition with the AMD Radeon RX 7700 XT, which has a deltaPct of 0. The RTX 5060's performance is nearly identical to that rival, and it is only 0.6% ahead of the NVIDIA GeForce RTX 5070 Mobile.

This data reveals a significant imbalance. The CPU is not the bottleneck, as its nearest rivals, such as the Intel Core i7-14700K and AMD Ryzen 9 9950X, have average scores within a -0.4% to 0.3% deltaPct of the 14700KF. The combo's mid-pack rank is therefore a direct consequence of the GPU's performance ceiling. In a game like Overpower, which scales heavily with graphics settings, the CPU's 20 cores and 28 threads are largely idle while the GPU struggles to maintain high frame rates at 4K, dragging the overall combo ranking down.

GPU Role

The NVIDIA GeForce RTX 5060 is the decisive factor in this combo's Overpower performance. Its 8 GB of GDDR7 memory on a 128-bit bus provides a bandwidth of 448.0 GB/s. This configuration is sufficient for 1080p and 1440p gaming but becomes a liability at 4K. The benchmark data supports this, as the average FPS at 4K Ultra is just 56.4, which is below the 60 FPS threshold often considered the minimum for smooth gameplay.

The GPU's clock speeds, with a base of 2280 MHz and a boost of 2497 MHz, are respectable for its class. However, the sheer workload of Overpower at high resolutions overwhelms the 3840 shading units. The card's FP32 performance of 19.18 TFLOPS is a theoretical maximum that is rarely achieved in real-world gaming. The Passmark G3D score of 20891, which places it at a 73rd percentile, is a more realistic indicator of its gaming prowess.

The RTX 5060's performance is essentially tied with the AMD Radeon RX 7700 XT, as indicated by the 0 deltaPct in their average benchmark scores. This means users should expect similar frame rates from these two cards in Overpower, with neither having a clear advantage. The GPU's 145 W TDP and 300 W suggested PSU are modest, but they do not translate into exceptional performance in this title. The data clearly shows that the GPU is the limiting component, as increasing the resolution from 1080p to 4K at any settings level results in a significant FPS drop, highlighting the card's inability to keep up with the CPU's potential.

FAQ

Q: What is the average frame rate at 1080p with High settings?

A: The combo achieves an average of 94.3 FPS at 1920x1080 with High settings.

Q: How does the CPU compare to its nearest rival in synthetic benchmarks?

A: The Intel Core i7-14700KF has an average benchmark score of 70104, which is virtually identical to the Intel Core i7-14700K's score of 70074, resulting in a 0 deltaPct.

Q: Is the RTX 5060 capable of running Overpower at 4K Ultra settings smoothly?

A: No, the data shows an average of 56.4 FPS at 3840x2160 with Ultra settings, which is below the 60 FPS standard for smooth gameplay.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the average FPS drops from 147.8 at Low settings to 68.8 at Ultra settings, a difference of 79 FPS.

Q: What is the combo's overall ranking among tested configurations?

A: This combo ranks 891 out of 1744 tested combos in Overpower.

Q: Which GPU is a direct performance rival to the RTX 5060 based on benchmark scores?

A: The AMD Radeon RX 7700 XT has a matching average benchmark score of 30097, showing a 0 deltaPct compared to the RTX 5060's 30109.

Measured FPS Breakdown

The following table details the exact average FPS results from the benchmark data for Overpower.

| Resolution | Settings | Avg FPS |

| :--------- | :------- | :------ |

| 3840x2160 | High | 68.4 |

| 3840x2160 | Low | 125.3 |

| 3840x2160 | Medium | 76.3 |

| 3840x2160 | Ultra | 56.4 |

| 2560x1440 | High | 82.2 |

| 2560x1440 | Low | 147.8 |

| 2560x1440 | Medium | 89.7 |

| 2560x1440 | Ultra | 68.8 |

| 1920x1080 | High | 94.3 |

| 1920x1080 | Low | 161.1 |

| 1920x1080 | Medium | 98.4 |

| 1920x1080 | Ultra | 76.9 |

The data shows a clear hierarchy where 1080p Low is the only configuration that breaks the 160 FPS mark. For users with 1440p monitors, the Medium preset offers a good balance at 89.7 FPS, while those targeting 4K will need to stick to Low settings to achieve 125.3 FPS. The Ultra preset at 4K is the most demanding, yielding a 56.4 FPS average. This breakdown confirms that the RTX 5060 is best suited for 1080p and 1440p gaming, with 4K requiring significant compromises in visual fidelity to maintain playable frame rates.