Overpower

The Intel Core i7-14700K paired with the NVIDIA GeForce RTX 3080 delivers a robust 1080p and 1440p gaming experience in Overpower, but the data reveals a clear shift in bottleneck behavior as resolution climbs. At 1080p, the system achieves a 204.3 FPS average on Low settings, indicating that the CPU's strong single-threaded performance is capable of feeding the GPU effectively. However, the scaling from 1080p to 4K is steep: the Ultra preset drops from 100.2 FPS at 1080p to 74.3 FPS at 4K, a reduction of 25.9 FPS. This pattern suggests that while the CPU is sufficient for high-refresh-rate 1080p play, the GPU becomes the limiting factor at higher resolutions, particularly when graphical demands increase.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data shows a consistent performance hierarchy across all resolutions, with Low settings always producing the highest frame rates and Ultra the lowest. At 1080p, the spread between Low and Ultra is 104.1 FPS (204.3 vs 100.2), demonstrating that the GPU has ample headroom to render at higher settings. Moving to 1440p, the same spread narrows to 96.9 FPS (184.1 vs 87.2), while at 4K it tightens further to 80.6 FPS (154.9 vs 74.3). This narrowing spread indicates that as pixel count increases, the GPU's workload grows, making the graphics card the primary performance limiter.

The transition from 1080p to 1440p on High settings shows a drop from 120.7 FPS to 108.2 FPS, a 12.5 FPS decline. From 1440p to 4K on High, the drop is more pronounced: 108.2 FPS to 87.1 FPS, a 21.1 FPS reduction. This acceleration in performance loss at 4K is typical of a GPU-bound scenario, where the RTX 3080's 10 GB GDDR6X memory and 760.3 GB/s bandwidth are being taxed by higher pixel throughput. The data suggests that for competitive play at 1080p, the CPU's 20 cores and 28 threads are more than adequate, but for 4K gaming, the GPU's capabilities define the experience.

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core i7-14700K is a 20-core, 28-thread processor based on the Raptor Lake architecture, with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. In Overpower, the CPU's influence is most apparent at 1080p Low settings, where the 204.3 FPS average suggests that the processor can keep up with the GPU's output without becoming a bottleneck. The CPU's benchmark scores support this: a Cinebench R23 multi-core score of 44534 and a single-core score of 6287 indicate strong multi-threaded and single-threaded capability, both relevant for a game that likely scales across multiple cores.

The CPU's 33 MB of shared L3 cache and 2 MB per-core L2 cache help reduce latency, which is beneficial for maintaining consistent frame pacing in action games. Compared to its nearest rivals, the i7-14700K sits within 0.3% of the AMD EPYC 9115 and 0.5% ahead of the AMD Ryzen 9 9950X in average benchmark score, though these differences are negligible in real-world gaming. The CPU's 96th percentile ranking among all CPUs indicates it is a top-tier performer, and in Overpower, this translates to 1080p frame rates that exceed 200 FPS on Low settings, showing that the processor is not the limiting factor at lower resolutions.

How This Combo Ranks — use comboRankInGame vs other tested combos

This specific combination of the Intel Core i7-14700K and NVIDIA GeForce RTX 3080 ranks 491st out of 1744 tested combos in Overpower, placing it in the top 28.1% of all configurations. This ranking reflects a balanced pairing where the CPU and GPU complement each other well, though it does not break into the top tier of results. The RTX 3080's individual benchmark percentile is 80th among all GPUs, while the CPU's percentile is 96th, suggesting that the GPU is the weaker link in this pairing. This is consistent with the resolution scaling data, where the GPU becomes the primary constraint at 4K. The combo's rank indicates that while it is a strong performer, there are 490 other configurations that achieve higher average frame rates in this game, likely those with more powerful GPUs. The data shows that this combo is well-suited for high-refresh-rate 1440p gaming, but it is not optimized for maximum 4K performance.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the highest average FPS this combo achieves in Overpower?

A: The highest measured average FPS is 204.3, achieved at 1920x1080 resolution with Low settings.

Q: How much performance is lost when moving from 1080p to 4K on Ultra settings?

A: The average FPS drops from 100.2 at 1080p to 74.3 at 4K on Ultra settings, a loss of 25.9 FPS.

Q: Is this CPU or GPU combo better suited for 1440p or 4K gaming in Overpower?

A: The data shows it is better suited for 1440p, where it achieves 108.2 FPS on High settings, compared to 87.1 FPS at 4K on the same settings.

Q: How does the RTX 3080's performance compare to its nearest rival in synthetic benchmarks?

A: The RTX 3080 has an average benchmark score of 35787, which is 0.2% lower than the AMD Radeon Pro Duo's 35860 and 0.9% lower than the AMD Radeon RX 7900 GRE's 36101.

Q: What is the lowest average FPS recorded for this combo in Overpower?

A: The lowest average FPS is 74.3, achieved at 3840x2160 resolution with Ultra settings.

Q: Does the CPU's benchmark performance align with its in-game results?

A: Yes, the CPU's 96th percentile ranking and strong Cinebench scores (44534 multi-core, 6287 single-core) align with the high 1080p Low setting frame rate of 204.3 FPS, indicating the CPU is not a bottleneck at lower resolutions.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 3080 is built on the Ampere architecture with a GA102 chip, featuring 8704 shading units and 68 RT cores. Its memory configuration includes 10 GB of GDDR6X on a 320-bit bus, delivering 760.3 GB/s of bandwidth. In Overpower, the GPU's role becomes increasingly critical as resolution and settings increase. At 4K Ultra, the average FPS drops to 74.3, which is 54.9% lower than the 1080p Low result of 204.3 FPS. This significant drop highlights the GPU's workload at high pixel counts and demanding settings. The GPU's 80th percentile ranking among all GPUs indicates it is a solid performer, but its memory capacity of 10 GB may be a limiting factor in texture-heavy scenes at 4K. The boost clock of 1710 MHz and base clock of 1440 MHz provide adequate processing power, as evidenced by the Passmark G3D score of 25086. The GPU's FP32 performance of 29.77 TFLOPS supports smooth rendering in action sequences, but the data shows that at 4K Ultra, the RTX 3080 is the primary bottleneck, not the CPU.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS data, the optimal settings depend on the target resolution and desired frame rate. For 1080p gaming, the High preset at 120.7 FPS offers a strong balance between visual quality and performance, while Ultra at 100.2 FPS is viable for those prioritizing image quality. At 1440p, the High preset at 108.2 FPS provides a smooth experience, while Medium at 115.2 FPS slightly improves frame rates with a minor visual trade-off; the Ultra preset at 87.2 FPS is still playable but approaches the lower end of high-refresh-rate territory. For 4K, the Medium preset at 94.2 FPS is the recommended choice, as it delivers over 90 FPS while maintaining reasonable visual fidelity. The Low preset at 154.9 FPS is available for maximum performance, but the Medium setting offers a better balance. The Ultra preset at 74.3 FPS is best avoided for competitive play, but it remains an option for slower-paced sessions. Overall, the data suggests that High settings at 1080p and 1440p, and Medium at 4K, provide the best experience per the measured rows.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the measured average FPS values are: Low 204.3, Medium 129.7, High 120.7, and Ultra 100.2. The difference between Low and Medium is 74.6 FPS, indicating a significant performance cost for the first step up in settings. The gap between Medium and High is 9.0 FPS, and between High and Ultra is 20.5 FPS, showing diminishing returns as settings increase.

At 2560x1440, the average FPS values are: Low 184.1, Medium 115.2, High 108.2, and Ultra 87.2. The gap between Low and Medium is 68.9 FPS, while the gap between Medium and High is 7.0 FPS. The High to Ultra drop is 21.0 FPS, which is the largest step in this resolution, suggesting that Ultra settings impose a notable load on the GPU.

At 3840x2160, the average FPS values are: Low 154.9, Medium 94.2, High 87.1, and Ultra 74.3. The Low to Medium gap is 60.7 FPS, and the Medium to High gap is 7.1 FPS. The High to Ultra drop is 12.8 FPS, which is less severe than at lower resolutions, but the overall frame rates are lower. Across all resolutions, the Low setting consistently provides the highest FPS, while Ultra provides the lowest, with the differences between settings becoming more compressed at 4K due to GPU limitations.