Overpower

FAQ

Q: What is the strongest preset for this CPU and GPU combo in Overpower?

A: Based on measured FPS, the High preset delivers the most balanced experience, with 150.5 FPS at 1080p, 132.9 FPS at 1440p, and 112.1 FPS at 4K. It outperforms Medium by roughly 8-10 FPS at each resolution while staying far ahead of Ultra.

Q: How does the RTX 5070 Ti compare to its closest GPU rival in raw benchmark scores?

A: The RTX 5070 Ti posts an average benchmark score of 52,086, which is statistically identical to the RTX 4080 at 52,085—a delta of 0%. It also edges out the RTX A1000 by 2.5% while trailing the Radeon Pro W6600M by 2.5%.

Q: What is the CPU's multithreaded performance relative to its nearest rivals?

A: The Core i5-14600KF scores 49,367 on average, placing it 0.4% behind the Core i5-14600K and 0.5% ahead of the EPYC 4345P. It leads the Ryzen 9 5950X by 0.6% and the Xeon Gold 5318H by 1.4%.

Q: Can this combo handle 4K gaming at playable frame rates?

A: Yes. At 4K, the High preset yields 112.1 FPS, Medium 122 FPS, and Low 198.1 FPS. Even Ultra stays above 90 FPS at 93.6, so all presets are comfortably playable at 4K.

Q: How much performance is gained by dropping from 4K to 1080p?

A: At High settings, moving from 4K to 1080p increases average FPS from 112.1 to 150.5—a 34% improvement. At Low settings, the jump is from 198.1 to 259.4 FPS, a 31% gain, indicating the GPU remains the primary limiter even at lower resolutions.

Q: What is the combo's overall ranking among tested configurations?

A: This combo ranks 137th out of 1,744 tested combinations, placing it in the top 8% of all systems benchmarked in Overpower.

Settings Recommendations

The data clearly favors the High preset as the optimal configuration for this hardware pairing. At 1080p, High delivers 150.5 FPS, which is only 12.5 FPS below Medium's 163 FPS but a substantial 27.1 FPS above Ultra's 123.4 FPS. The gap between High and Ultra widens at higher resolutions: at 1440p, High hits 132.9 FPS versus Ultra's 111.1 FPS, and at 4K the difference grows to 18.5 FPS (112.1 vs. 93.6).

Choosing Medium over High yields marginal gains—only 12.5 FPS at 1080p, 13.9 FPS at 1440p, and 9.9 FPS at 4K—while sacrificing visual fidelity. The Low preset offers massive frame rates (259.4 FPS at 1080p) but likely strips too much graphical detail for a modern action title. Ultra is the only preset that dips below 100 FPS at 4K (93.6), suggesting it pushes the GPU harder than necessary for smooth gameplay.

For competitive play or high-refresh monitors, High at 1440p (132.9 FPS) provides an excellent balance. For 4K displays, High remains the sweet spot at 112.1 FPS, keeping frame times consistent without the overhead of Ultra. The benchmark results indicate that High is the ceiling for maximizing both visual quality and frame rate headroom across all tested resolutions.

Resolution Scaling

The FPS scaling from 1080p to 4K reveals a GPU-bound workload with predictable degradation. At High settings, the frame rate drops from 150.5 FPS at 1080p to 132.9 FPS at 1440p (an 11.7% loss) and further to 112.1 FPS at 4K (a 25.5% loss from 1080p). This pattern—roughly 12% per resolution step—is characteristic of a system where the RTX 5070 Ti's rendering throughput is the limiting factor.

At Low settings, the scaling is more aggressive: 259.4 FPS at 1080p falls to 230.7 FPS at 1440p (11% loss) and 198.1 FPS at 4K (23.6% loss). The consistency of these percentage drops across presets suggests that resolution scaling is independent of graphical complexity—the GPU's pixel throughput dictates the frame rate regardless of shader load.

Notably, the gap between 1440p and 4K is consistently smaller than the gap between 1080p and 1440p in absolute terms. For example, at Medium settings, 1080p yields 163 FPS, 1440p yields 146.8 FPS (a 16.2 FPS drop), and 4K yields 122 FPS (a 24.8 FPS drop from 1440p). This indicates that 4K resolution demands disproportionately more memory bandwidth and pixel fill, which the 896.0 GB/s bandwidth and 235.4 GPixel/s pixel rate handle capably but not effortlessly.

Measured FPS Breakdown

At 1080p, the full preset range spans from 259.4 FPS (Low) down to 123.4 FPS (Ultra). The Medium preset delivers 163 FPS, while High sits at 150.5 FPS. This 136 FPS spread between Low and Ultra demonstrates the GPU's substantial headroom at this resolution—even Ultra maintains triple-digit frame rates.

Moving to 1440p, the results scale predictably: Low produces 230.7 FPS, Medium 146.8 FPS, High 132.9 FPS, and Ultra 111.1 FPS. The ordering remains identical to 1080p, with each preset losing roughly 10-15% of its 1080p performance. The Ultra preset at 1440p still clears 100 FPS, making it viable for high-refresh 1440p monitors.

At 4K, the hierarchy holds: Low achieves 198.1 FPS, Medium 122 FPS, High 112.1 FPS, and Ultra 93.6 FPS. This is the only resolution where Ultra falls below 100 FPS, and even then it remains playable. The 4K Low figure of 198.1 FPS is particularly notable—it exceeds the 1080p Ultra result by 74.7 FPS, showing that the GPU can deliver high frame rates at 4K when graphical settings are reduced.

The data shows no anomalies or unexpected inversions across the 12 measured configurations. Each resolution shows consistent preset scaling, and each preset shows consistent resolution scaling, confirming the benchmark methodology captured a stable, repeatable performance profile.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the clear performance driver in this pairing. Its 16 GB of GDDR7 memory on a 256-bit bus delivers 896.0 GB/s of bandwidth, which directly supports the 4K performance observed—the 112.1 FPS at 4K High would be impossible with insufficient memory throughput. The GPU's 43.94 TFLOPS of FP32 compute and 686.6 GTexel/s texture rate explain why even Ultra settings at 1440p maintain 111.1 FPS.

The GPU's benchmark scores place it in the 87th percentile of all GPUs, with an average score of 52,086. Its nearest rival, the RTX 4080, scores identically (52,085, 0% delta), confirming that this is a top-tier graphics card. The 2.5% lead over the RTX A1000 and 2.5% deficit to the Radeon Pro W6600M further contextualize its position—it trades blows with the previous generation's flagship while offering modern Blackwell 2.0 features.

Clock speeds of 2295 MHz base and 2452 MHz boost provide the raw throughput needed for the high frame rates seen at 1080p, where the GPU is less pixel-bound. The 300 W TDP and 700 W suggested PSU indicate this is a power-hungry part, but the benchmark results justify the requirement. The 70 ray tracing cores and 280 tensor cores suggest future-proofing for titles with advanced lighting, though Overpower's measured results do not specifically isolate ray tracing performance.

CPU Role

The Intel Core i5-14600KF provides ample processing headroom for Overpower, as evidenced by the consistent frame rates across all resolutions. Its 14 cores and 20 threads, with a base clock of 3.50 GHz and boost of 5.30 GHz, ensure that even the highest FPS figures (259.4 at 1080p Low) are not CPU-limited. The 24 MB of shared L3 cache and 2 MB per-core L2 cache reduce memory latency for game logic and physics calculations.

In synthetic benchmarks, the CPU scores 32,889 in Cinebench R23 multi-core and 4,643 in single-core, placing it in the 93rd percentile of all CPUs. Its average benchmark score of 49,367 puts it within 0.5% of the EPYC 4345P and 0.4% of the Core i5-14600K, showing that it performs at the top of its class. The 125 W TDP and unlocked multiplier make it an enthusiast-friendly part, though the benchmark data does not include overclocking results.

The CPU's role becomes apparent when examining the 1080p Low result of 259.4 FPS—at such high frame rates, any CPU bottleneck would manifest as inconsistent scaling. Instead, the smooth progression from Low to Ultra at each resolution indicates the 14600KF keeps pace with the GPU's output. The PassMark single-thread score of 4,273 and multi-thread score of 38,697 confirm strong per-core performance, which is critical for games that rely on a few heavily loaded threads.

How This Combo Ranks

This configuration ranks 137th out of 1,744 tested combos in Overpower, placing it in the top 7.9% of all systems. This is an exceptional result for a mid-range CPU paired with a high-end GPU, suggesting that the i5-14600KF does not hold back the RTX 5070 Ti in this title. The ranking reflects the GPU's dominance in the pairing, as the 5070 Ti's 87th percentile GPU performance outweighs the CPU's 93rd percentile standing.

The rank of 137 out of 1,744 means this combo outperforms roughly 1,607 other configurations, including many with more expensive CPUs or older flagship GPUs. Given that the GPU's closest rival (RTX 4080) scores identically in synthetic benchmarks, this combo likely trades positions with similar RTX 4080 builds depending on CPU choice. The 0.4% CPU performance delta to the i5-14600K suggests that swapping to the K variant would yield negligible real-world gains in Overpower.

The combination's strength lies in its balance: the CPU's 5.30 GHz boost clock prevents bottlenecking at high frame rates, while the GPU's 16 GB VRAM and 896.0 GB/s bandwidth handle 4K textures without compromise. For users targeting 1440p high-refresh or 4K 60+ FPS gameplay, this combo ranks among the most capable tested, with only 136 configurations ahead of it—likely featuring higher-end GPUs like the RTX 5090 or multi-GPU setups that are impractical for most users.