Overpower

How This Combo Ranks

The AMD Ryzen 9 5950X paired with the NVIDIA GeForce RTX 5070 Ti lands at rank 374 out of 3713 tested combinations in Overpower. That places this pairing comfortably inside the top 10% of all tested configs, with roughly 90% of recorded combos ranked below it. The position reflects a balanced pairing where neither component is dramatically underperforming relative to the other. The CPU sits at the 91st percentile among all tested processors, while the GPU is at the 86th percentile among all tested graphics cards, so the combo's rank is consistent with both parts being high-tier but not absolute top-tier hardware. The data shows a system that should handle the game without major compromise, though there are clear patterns in the measured frames that reveal where the bottleneck shifts depending on settings and resolution.

GPU Role

The RTX 5070 Ti brings 16 GB of GDDR7 memory on a 256-bit bus, with memory clocked at 1750 MHz and an effective data rate of 28 Gbps. That yields a memory bandwidth of 896.0 GB/s, which is substantial for a game like Overpower that appears to be sensitive to both raw throughput and memory capacity at higher resolutions. The GPU's base clock is 2295 MHz with a boost clock of 2452 MHz, and it packs 8960 shading units, 280 texture mapping units, and 96 raster output units. The 70 RT cores and 280 tensor cores indicate the card is well-equipped for any ray tracing or DLSS workloads the game might throw at it, though the measured data here does not isolate those features.

The GPU's benchmark profile shows a PassMark G3D score of 32974 and a 3DMark Steel Nomad DX12 score of 6604. Its nearest rivals in the aggregate GPU benchmark list include the AMD Radeon RX Vega 64 with a delta of -0.1%, the Intel Arc A550M at +0.4%, the AMD Radeon RX 6900 XT at -2%, and the AMD Radeon RX 6800 XT at +3.1%. These deltas are small, meaning the RTX 5070 Ti is trading blows with a range of previous-generation high-end cards in synthetic tests. In Overpower specifically, the GPU's role becomes more pronounced as resolution climbs, which the resolution scaling section will detail. At 4K Ultra, the average FPS drops to 93, while at 1080p Low it reaches 230, indicating the GPU is heavily taxed at the high end.

Resolution Scaling

The measured FPS data shows a clear and consistent pattern as resolution increases from 1920x1080 to 3840x2160. At Low settings, the average frame rate goes from 230 FPS at 1080p to 193 FPS at 4K, a drop of 37 FPS or roughly 16%. At Medium settings, the drop is from 159 FPS at 1080p to 121 FPS at 4K, a reduction of 38 FPS or about 24%. High settings show a decline from 148 FPS at 1080p to 112 FPS at 4K, which is 36 FPS lower or about 24%. Ultra settings see the steepest relative drop: 123 FPS at 1080p falls to 93 FPS at 4K, a loss of 30 FPS or roughly 24%.

The fact that the percentage drop is fairly consistent across settings — hovering around 16% for Low and 24% for everything else — suggests the GPU is the limiting component when moving to 4K. The CPU, with its 16 cores and 32 threads, has enough headroom to keep feeding the GPU at lower resolutions, but the GPU's pixel throughput becomes the constraint as the resolution grows. At 1080p Low, the system is likely CPU-bound or at least balanced, since 230 FPS is well beyond what most displays can show. At 4K Ultra, the GPU is clearly the bottleneck, with the frame rate dropping to 93 FPS. The 1440p results sit neatly between the two extremes: Low hits 221 FPS, Medium 142, High 132, and Ultra 109. For a game like Overpower, this scaling behavior indicates that users with 1440p displays should have no trouble maintaining high frame rates, while 4K users will need to make settings trade-offs to keep things smooth.

FAQ

Q: What is the overall rank of this CPU/GPU combination in Overpower?

A: The combo ranks 374th out of 3713 tested combinations, placing it in the top 10% of all recorded configs.

Q: How does the RTX 5070 Ti compare to its nearest GPU rivals in synthetic benchmarks?

A: The RTX 5070 Ti's average benchmark score of 49957 is 0.1% below the AMD Radeon RX Vega 64, 0.4% above the Intel Arc A550M, 2% below the AMD Radeon RX 6900 XT, and 3.1% above the AMD Radeon RX 6800 XT.

Q: What is the highest average FPS recorded for this combo, and at what settings?

A: The highest average FPS is 230, achieved at 1920x1080 with Low settings.

Q: What is the lowest average FPS recorded for this combo, and at what settings?

A: The lowest average FPS is 93, achieved at 3840x2160 with Ultra settings.

Q: Does the CPU hold back the GPU at any resolution?

A: The data indicates the CPU is not a major limiting factor. At 1080p Low, the system reaches 230 FPS, and the CPU's 16 cores and 32 threads provide ample headroom. The frame rate drops consistently with resolution, pointing to the GPU as the primary constraint at 4K.

Q: What is the CPU's percentile rank among all tested processors?

A: The AMD Ryzen 9 5950X sits at the 91st percentile among all CPUs tested, with an average benchmark score of 51947.

Settings Recommendations

Looking at the measured FPS rows, the Medium preset offers the best balance of visual quality and performance. At 1920x1080, Medium averages 159 FPS with a minimum of 135 and a maximum of 183, which is only 11 FPS below High and 36 FPS above Ultra. At 2560x1440, Medium hits 142 FPS average with a 121 minimum and 163 maximum, still well above the 109 FPS of Ultra. Even at 3840x2160, Medium maintains 121 FPS average with a 103 minimum and 139 maximum, which is the only 4K preset that stays above the 100 FPS mark. High settings at 4K drop to 112 FPS average, and Ultra falls to 93, so Medium is the clear winner for those targeting high refresh rates at any resolution.

If the user prioritizes maximum visual fidelity, Ultra is playable at 1080p with 123 FPS average, but at 1440p it drops to 109 FPS and at 4K to 93 FPS, which may feel less smooth on high refresh displays. Low settings push frame rates to 230 FPS at 1080p, 221 at 1440p, and 193 at 4K, but the visual trade-offs are likely too steep for a game that appears to scale well with graphics quality. The data suggests that Medium is the "sweet spot" preset, offering a 24% performance boost over High at 4K while still maintaining a solid visual baseline. For competitive play where frame rate is king, Low at 1080p delivers the highest possible headroom, but for most users, Medium provides the best overall experience across all three resolutions.

CPU Role

The AMD Ryzen 9 5950X is a 16-core, 32-thread processor based on the Zen 3 architecture (Vermeer), built on TSMC's 7 nm process. It has a base clock of 3.40 GHz and a boost clock of 4.90 GHz, with 64 MB of L3 cache and 512 KB of L2 cache per core. The CPU supports DDR4 memory with dual-channel configuration and a memory bandwidth of 51.2 GB/s, and it uses the AMD Socket AM4 platform with PCIe Gen 4 (20 lanes). The 105W TDP and unlocked multiplier make it a flexible part for overclocking, though the measured results here reflect stock behavior.

In synthetic benchmarks, the 5950X scores 26017 in Cinebench R23 multicore and 1614 in single-core, with a Geekbench multicore score of 15233 and single-core of 2083. Its PassMark multithread score is 45424, and the single-thread score is 3470. The CPU's average benchmark score is 51947, which places it at the 91st percentile among all CPUs. Its nearest rivals in the benchmark database are the Intel Core Ultra 5 235HX with a delta of -0.2%, the AMD EPYC 8124P at -0.3%, the Intel Core i9-13900F at +0.4%, and the Intel Core i7-14700 at -0.7%. These deltas are all within 1%, meaning the 5950X is effectively tied with a group of modern high-end processors in aggregate performance.

For Overpower, the CPU's role is most visible at lower resolutions and settings. At 1080p Low, the system hits 230 FPS, which is likely near the upper bound of what the CPU can feed to the GPU. The 16-core, 32-thread configuration ensures that even heavily threaded game logic won't saturate the processor, and the high boost clock of 4.90 GHz handles single-threaded tasks well. The data shows no signs of CPU-induced frame drops, as the minimum FPS values at Medium settings are proportionally close to the averages across all resolutions. The CPU's 91st percentile ranking reinforces that it is not the weak link in this pairing.

Measured FPS Breakdown

Starting at 1920x1080, the lowest resolution tested, the combo delivers its highest frame rates. Low settings produce an average of 230 FPS, Medium averages 159 FPS with a minimum of 135 and maximum of 183, High averages 148 FPS, and Ultra averages 123 FPS. The gap between Low and Medium is 71 FPS, which is substantial, while the step from Medium to High is only 11 FPS and from High to Ultra is 25 FPS. This suggests that the visual quality difference between Medium and High is relatively small in terms of performance cost, while Low is a significant compromise for a large frame rate gain.

Moving to 2560x1440, the frame rates scale down proportionally. Low averages 221 FPS, Medium averages 142 FPS with a minimum of 121 and maximum of 163, High averages 132 FPS, and Ultra averages 109 FPS. The drop from 1080p to 1440p is roughly 4% at Low, 11% at Medium, 11% at High, and 11% at Ultra. The consistency of the 11% drop across Medium, High, and Ultra indicates a predictable GPU-bound scaling pattern.

At 3840x2160, the highest resolution tested, the frame rates show the GPU's workload most clearly. Low averages 193 FPS, Medium averages 121 FPS with a minimum of 103 and maximum of 139, High averages 112 FPS, and Ultra averages 93 FPS. The drop from 1440p to 4K is 13% at Low, 15% at Medium, 15% at High, and 15% at Ultra. The minimum FPS at 4K Medium is 103, which is still above the 100 FPS threshold for smooth gameplay, while the Ultra preset falls below 100 FPS on average. The data across all resolutions shows that the combo is capable of high refresh rate gaming at 1080p and 1440p, and can maintain playable frame rates at 4K with settings adjustments.