Overpower

The Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 5060 delivers a solid 1080p and 1440p experience in Overpower, but the data reveals a clear performance ceiling at 4K. This combination ranks 850th out of 1744 tested combos for this title, placing it in the upper half of the database. The benchmark results show a system that is well-balanced at lower resolutions, where the GPU is the primary driver, but increasingly CPU-limited as pixel count rises.

Resolution Scaling

The measured FPS data shows a predictable decline as resolution increases, but the rate of that decline tells an interesting story about system balance. At Ultra settings, the frame rate drops from 77.3 FPS at 1920x1080 to 66.4 FPS at 2560x1440, a reduction of approximately 14%. Moving to 3840x2160, the average falls further to 60.7 FPS, which is a 21% drop from the 1080p figure. This scaling pattern suggests the GPU is the limiting factor at 4K, as the frame rate penalty is substantial.

However, the Low settings row reveals a different dynamic. At 1920x1080 Low, the system achieves 159.5 FPS. At 2560x1440 Low, it reaches 148.2 FPS, only a 7% reduction. At 3840x2160 Low, it maintains 121.2 FPS, which is a 24% drop from 1080p. The relatively small penalty between 1080p and 1440p at Low settings indicates the CPU can keep pace with the GPU's output at these lower graphical loads. The larger 4K penalty at Low settings implies the GPU’s 8 GB VRAM and 128-bit memory bus become strained when pushing higher pixel counts, even with minimal graphical detail.

The data implies that 1440p is the sweet spot for this combo. The gap between 1080p and 1440p at High settings is only 8.7 FPS (92.4 to 83.7), suggesting the GPU still has headroom. At 4K, the Ultra preset drops below 60 FPS, which is a critical threshold for smooth gameplay in an Action title. The resolution scaling pattern shows diminishing returns from 1080p to 1440p, but a steep cliff when jumping to 4K.

GPU Role

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture with a 5 nm process from TSMC. It features 3840 shading units, 120 texture mapping units, and 48 raster output pipelines. The GPU operates at a base clock of 2280 MHz and boosts to 2497 MHz. With 30 RT cores and 120 tensor cores, the card is equipped for ray tracing and DLSS workloads. The FP32 performance is rated at 19.18 TFLOPS, which is identical to its FP16 rating, indicating a 1:1 ratio.

The memory subsystem is a potential bottleneck. The card has 8 GB of GDDR7 memory on a 128-bit bus, yielding a bandwidth of 448.0 GB/s. The memory clock runs at 1750 MHz, with 28 Gbps effective transfer rate. At 4K Ultra, the frame rate drops to 60.7 FPS, which aligns with the VRAM capacity being pushed to its limits. The 8 GB allocation is modest for 3840x2160 rendering, and the 128-bit bus limits how quickly textures can be streamed. The data shows that at 4K High (73.2 FPS) and 4K Medium (79.8 FPS), the card performs better than at Ultra, suggesting that memory bandwidth and capacity are more critical than raw shader throughput at higher resolutions.

The GPU's pixel rate is 119.9 GPixel/s, and its texture rate is 299.6 GTexel/s. These figures support the 1080p and 1440p results, where fill-rate demands are lower. The card's Passmark G3D score of 20891 places it in the 73rd percentile of all GPUs, and its average benchmark score of 30109 is nearly identical to the AMD Radeon RX 7700 XT, which scores 30097 with a 0% deltaPct. This near-parity suggests the RTX 5060 competes directly with that card in raw compute, though game-specific results may vary.

Settings Recommendations

The measured FPS rows provide clear guidance on preset selection. At 1920x1080, all presets deliver playable frame rates, with Low hitting 159.5 FPS and Ultra reaching 77.3 FPS. The jump from Medium (102.9 FPS) to High (92.4 FPS) is a 10.5 FPS cost, while High to Ultra costs another 15.1 FPS. For competitive play at 1080p, Low or Medium presets offer the highest headroom.

At 2560x1440, the situation is more nuanced. High settings yield 83.7 FPS, which is smooth for most Action games. Ultra drops to 66.4 FPS, still playable but with less margin. Medium provides 93.1 FPS, which is a good balance of visual fidelity and performance. The data suggests that 1440p High is the optimal choice, as it maintains a comfortable frame rate while retaining most graphical features. The 4K resolution demands compromise: Ultra averages 60.7 FPS, which is borderline, while High (73.2 FPS) and Medium (79.8 FPS) are safer bets. Low at 4K (121.2 FPS) is an option for maximum responsiveness, but it sacrifices too much visual quality.

The measured data shows that the Ultra preset at 1440p and above incurs a significant penalty. The frame rate difference between 1440p High and 1440p Ultra is 17.3 FPS, which is a larger gap than between 1440p Medium and 1440p High (9.4 FPS). This indicates the Ultra preset enables effects that disproportionately strain the GPU.

How This Combo Ranks

The combination of the Intel Core i5-14600KF and NVIDIA GeForce RTX 5060 ranks 850th out of 1744 tested combos in this game. This places the pairing in the 51st percentile of all systems tested, meaning it outperforms slightly more than half of the configurations in the database. The rank reflects the system's moderate standing; it is not a top-tier setup, but it is far from a weak one.

The CPU itself ranks in the 93rd percentile of all CPUs, with an average benchmark score of 49367. Its nearest rival is the Intel Core i5-14600K, which scores 49166, a deltaPct of 0.4% in favor of the 14600KF. The AMD EPYC 4345P scores 49595, which is 0.5% higher, and the AMD Ryzen 9 5950X scores 49062, 0.6% lower. The GPU, meanwhile, ranks in the 73rd percentile of all GPUs, with an average score of 30109. Its nearest rival, the RX 7700 XT, matches it at 30097 with a 0% deltaPct. This CPU is a strong performer relative to its peers, while the GPU is average, suggesting the combo rank is dragged down by the graphics card.

The combo's rank of 850 implies that many other pairings with stronger GPUs or more balanced CPUs outperform it. The data shows the CPU is not a limiting factor in most scenarios, but the GPU's mid-pack standing holds the system back in a title like Overpower that scales well with graphics hardware.

FAQ

Q: What is the best resolution for this combo in Overpower?

A: The data shows 2560x1440 offers the best balance, with High settings achieving 83.7 FPS and Medium reaching 93.1 FPS. At 1920x1080, frame rates are higher (92.4 FPS on High), but the visual upgrade to 1440p is worth the modest 8.7 FPS cost.

Q: Can this system handle 4K gaming in Overpower?

A: Yes, but with caveats. At 4K Ultra, the average FPS is 60.7, which is playable but not ideal. Dropping to High (73.2 FPS) or Medium (79.8 FPS) provides more headroom. The 8 GB VRAM and 128-bit memory bus are the limiting factors at this resolution.

Q: How does the RTX 5060 compare to its closest rival?

A: The RTX 5060 has an average benchmark score of 30109, which is statistically identical to the AMD Radeon RX 7700 XT's 30097, a 0% deltaPct. This means they perform nearly identically in synthetic benchmarks, though game-specific results may vary.

Q: Is the Intel Core i5-14600KF a strong CPU for gaming?

A: Yes, it ranks in the 93rd percentile of all CPUs. Its average benchmark score of 49367 is 0.4% higher than the Intel Core i5-14600K and 0.6% higher than the AMD Ryzen 9 5950X. It has 14 cores and 20 threads, boosting up to 5.30 GHz.

Q: What is the frame rate difference between 1080p and 1440p at High settings?

A: At 1920x1080 High, the average FPS is 92.4. At 2560x1440 High, it drops to 83.7 FPS, a decrease of 8.7 FPS or about 9.4%. This is a modest penalty for the resolution increase.

Q: Does the Ultra preset provide a good experience at 1440p?

A: The Ultra preset at 1440p averages 66.4 FPS, which is playable but noticeably lower than High (83.7 FPS). The 17.3 FPS gap between these presets suggests Ultra enables effects that heavily tax the GPU.

Measured FPS Breakdown

The complete measured FPS table for this combo is as follows. At 3840x2160, the average frame rates are: Low 121.2 FPS, Medium 79.8 FPS, High 73.2 FPS, and Ultra 60.7 FPS. At 2560x1440: Low 148.2 FPS, Medium 93.1 FPS, High 83.7 FPS, and Ultra 66.4 FPS. At 1920x1080: Low 159.5 FPS, Medium 102.9 FPS, High 92.4 FPS, and Ultra 77.3 FPS.

The scaling between resolutions is consistent. At Low settings, the drop from 1080p to 1440p is 11.3 FPS, and from 1440p to 4K is 27 FPS. At Medium, the drops are 9.8 FPS and 13.3 FPS respectively. At High, the drops are 8.7 FPS and 10.5 FPS. At Ultra, the drops are 10.9 FPS and 5.7 FPS. The 4K Ultra figure of 60.7 FPS is the only result below the 60 FPS threshold, indicating the system's performance cliff. The Low preset at 1080p, at 159.5 FPS, is the highest recorded result, suggesting the CPU can push the GPU to high output when graphical load is minimal.

CPU Role

The Intel Core i5-14600KF is a 14-core, 20-thread processor based on the Raptor Lake architecture, specifically the Raptor Lake-R generation. It has a base clock of 3.50 GHz and a boost clock of 5.30 GHz. The CPU is built on a 10 nm process from Intel, with a die size of 257 mm². It has 80 KB of L1 cache per core, 2 MB of L2 cache per core, and 24 MB of shared L3 cache. The TDP is 125 W, and it supports DDR4 and DDR5 memory on a dual-channel bus.

The CPU's benchmark results show strong multi-threaded performance. It scores 32889 in Cinebench R23 multi-core and 4643 in single-core. In Geekbench, it scores 15636 multi-core and 2778 single-core. Passmark results include 38697 for multi-thread and 4273 for single-thread. These numbers place it in the 93rd percentile of all CPUs, with an average benchmark score of 49367. Its nearest rival, the i5-14600K, scores 49166, a mere 0.4% difference, indicating the KF variant is essentially identical in performance.

In Overpower, the CPU's role is to feed the GPU. At 1080p Low, the system hits 159.5 FPS, which suggests the CPU is capable of high frame generation. The boost clock of 5.30 GHz and 20 threads provide ample compute for game logic and physics. However, at 4K, the CPU is not the bottleneck; the GPU's 8 GB VRAM and 128-bit bus are. The data shows that the i5-14600KF has enough headroom to support higher FPS than the RTX 5060 can deliver at higher resolutions, making the GPU the limiting component in this pairing.