Overpower

The Intel Core i5-14600KF paired with the AMD Radeon RX 6750 XT lands at rank 1705 out of 3713 tested combinations in Overpower. That places this build squarely in the middle of the database, a position that reflects a balanced pairing rather than an extreme one. The combo sits at roughly the 54th percentile of all tested systems, meaning slightly more than half of the configured rigs in our charts deliver higher frame rates in this action title. This is not a leaderboard-topping configuration, but it is far from a struggling one; the data indicates a system that can handle the game's demands without being the bottleneck itself.

How This Combo Ranks

The 1705th rank out of 3713 combos is a telling statistic for this pairing. It suggests that while the CPU and GPU are individually competent, they do not combine to create a top-tier experience in Overpower. The position reflects a system that will deliver smooth gameplay at most settings, but it will not compete with high-end configurations that dominate the upper echelons of the benchmark charts. The ranking is a direct result of the measured FPS across resolutions, where the GPU consistently limits performance more than the CPU.

Data from the measured frames shows that this combo is capable of exceeding 60 FPS in every tested configuration except one, which is a solid baseline for an action game. However, the gap between this rank and the top performers is substantial, indicating that users seeking maximum refresh rates at 4K will need to look elsewhere. The middle-of-the-pack placement also suggests that the pairing is well-matched in terms of avoiding severe bottlenecks, as neither component drastically outperforms the other in a way that would skew the results. This is a workmanlike combination, delivering predictable performance that scales predictably with settings and resolution.

GPU Role

The AMD Radeon RX 6750 XT is the primary driver of frame rates in this combo, and its specifications explain why. The GPU features 12 GB of GDDR6 memory on a 192-bit bus, providing 432.0 GB/s of bandwidth. This memory configuration is sufficient for Overpower's textures at most settings, but the 4K Ultra result of 59 FPS suggests that the 12 GB frame buffer is being pushed to its limits at the highest fidelity levels. The GPU's boost clock of 2600 MHz and game clock of 2495 MHz, built on the RDNA 2.0 architecture with 2560 shading units, provide the raw compute power needed for the game's effects.

The GPU's 71st percentile ranking among all GPUs, with an average benchmark score of 26011, places it above the median but well below enthusiast-class hardware. Its nearest rivals include the AMD Radeon R9 M395X (0.5% lower score) and the NVIDIA GeForce RTX 3080 Ti Mobile (1.1% higher score), which puts its raw compute performance in a specific band. In Overpower specifically, the data shows that the GPU is the limiting factor at higher resolutions. The drop from 94 FPS at 1080p High to 84 FPS at 1440p High to 72 FPS at 4K High demonstrates a consistent performance degradation that aligns with the GPU's memory bandwidth and compute capacity. The 40 ray accelerators on this chip do not appear to provide a significant advantage in this title, as the frame rates scale smoothly with resolution rather than showing spikes or drops related to ray tracing workloads.

Resolution Scaling

The measured FPS data reveals a clear scaling pattern across resolutions. At 1080p Low, the combo delivers 163 FPS, which drops to 145 FPS at 1440p Low and 123 FPS at 4K Low. This represents a 24.5% reduction from 1080p to 4K at the lowest settings, indicating that even at Low, the GPU is still the primary constraint. The scaling is more pronounced at higher settings: at High, the transition from 1080p (94 FPS) to 1440p (84 FPS) to 4K (72 FPS) shows a 23.4% drop from 1080p to 4K, which is nearly identical to the Low setting percentage.

This consistent scaling pattern suggests that Overpower is not particularly demanding on the CPU at any resolution. The Intel Core i5-14600KF, with its 14 cores and 20 threads, provides ample headroom, so the frame rate differences across resolutions are almost entirely attributable to the GPU. At Medium settings, the combo yields 102 FPS at 1080p, 91 FPS at 1440p, and 77 FPS at 4K, a 24.5% decline from 1080p to 4K. The Ultra preset shows the steepest relative drop: 78 FPS at 1080p, 70 FPS at 1440p, and 59 FPS at 4K, a 24.4% reduction. The uniformity of these percentages—hovering around 24%—reinforces that the GPU is the limiting component across all tested configurations, with the CPU never becoming a bottleneck even at 1080p Low where the GPU is least stressed.

Settings Recommendations

The data provides a clear hierarchy for settings optimization in Overpower. At 4K, the Ultra preset yields an average of 59 FPS, which is just below the 60 FPS threshold many users consider the minimum for smooth action gameplay. Dropping to High at 4K raises the average to 72 FPS, a 22% improvement that brings the experience comfortably above 60 FPS. The Medium preset at 4K offers 77 FPS, which is only 6.9% higher than High, suggesting that the visual quality reduction from High to Medium does not translate into a proportional performance gain at this resolution.

For 1440p, the Ultra preset delivers 70 FPS, which is playable but not ideal for fast-paced action. The High preset at 1440p provides 84 FPS, a 20% increase over Ultra, and this appears to be the sweet spot for this resolution. The jump from High to Medium at 1440p yields 91 FPS, an 8.3% improvement, which may not justify the visual downgrade. At 1080p, all presets exceed 78 FPS, with Ultra at 78 FPS, High at 94 FPS, Medium at 102 FPS, and Low at 163 FPS. The High preset at 1080p offers the best balance, as it delivers 94 FPS while maintaining most visual features, whereas Medium adds only 8.5% more performance at the cost of reduced fidelity. For users with high refresh rate monitors at 1080p, the Low preset's 163 FPS is the only option that fully utilizes a 144Hz or 165Hz display, but the visual compromise is significant. Overall, the data suggests that High settings at either 1080p or 1440p provide the most balanced experience, with 4K requiring a drop to High or Medium to maintain smooth gameplay.

Measured FPS Breakdown

The complete measured dataset for this combo shows the following results. At 1920x1080, the Low preset achieves an average of 163 FPS, while Medium reaches 102 FPS with minimum and maximum values of 86 and 117 FPS respectively. High at 1080p produces 94 FPS, and Ultra drops to 78 FPS. Moving to 2560x1440, Low yields 145 FPS, Medium averages 91 FPS with a range of 77 to 104 FPS, High delivers 84 FPS, and Ultra falls to 70 FPS. At 3840x2160, the Low preset still manages 123 FPS, which is surprisingly high for 4K and indicates that Overpower is well-optimized at lower settings. Medium at 4K averages 77 FPS with a spread of 66 to 89 FPS, High produces 72 FPS, and Ultra bottoms out at 59 FPS.

These numbers reveal a few notable patterns. The 4K Low result of 123 FPS is higher than the 1440p Ultra result of 70 FPS, which demonstrates that the settings preset has a more significant impact on performance than resolution alone. The minimum FPS values, which are only recorded for the Medium preset at each resolution, show that frame pacing is consistent: 86 FPS at 1080p, 77 FPS at 1440p, and 66 FPS at 4K. These minimums are all well above 60 FPS, suggesting that even in demanding scenes, the combo does not experience severe stuttering. The gap between Medium and High at each resolution is relatively small—8 FPS at 1080p, 7 FPS at 1440p, and 5 FPS at 4K—which indicates that the High preset is a more efficient choice than Medium, as it provides better visuals for a modest performance cost.

CPU Role

The Intel Core i5-14600KF plays a supporting role in this combo, but its specifications ensure that it never holds back the GPU. With 14 cores and 20 threads based on the Raptor Lake architecture, the CPU operates at a base clock of 3.50 GHz and boosts up to 5.30 GHz. The 24 MB of shared L3 cache and 2 MB per-core L2 cache provide ample bandwidth for game logic and asset streaming. The CPU's 90th percentile ranking among all CPUs, with an average benchmark score of 49394, places it in the upper tier of processors, and its nearest rivals include the AMD Ryzen 9 7900 (0.3% higher score) and the AMD Ryzen AI Max+ 388 (0.8% lower score).

In Overpower, the CPU's performance is more than sufficient for the GPU to reach its limits. The benchmark results show that the CPU scores 32544 in Cinebench R23 multi-core and 4594 in single-core, which are strong numbers for gaming workloads. The fact that frame rates scale almost identically across resolutions—around a 24% drop from 1080p to 4K at every setting—confirms that the CPU is not introducing any variability. Even at 1080p Low, where the GPU is least stressed and the CPU would theoretically be most likely to bottleneck, the combo still achieves 163 FPS, indicating that the 14600KF has significant headroom. The CPU's 20 threads handle Overpower's multi-threaded tasks effectively, and the high boost clock of 5.30 GHz ensures that single-threaded game logic runs without latency issues. This is a CPU that does its job invisibly, allowing the RX 6750 XT to be the sole determinant of frame rates in this title.