Overpower

Overpower

AVERAGE FPS
54
playable

This combination offers playable performance with an average of 54 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 33 40 43 69
1440p QHD 39 47 51 81
1080p Full HD 44 53 57 91

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 69
3840x2160 Medium 43
3840x2160 High 40
3840x2160 Ultra 33
2560x1440 Low 81
2560x1440 Medium 51
2560x1440 High 47
2560x1440 Ultra 39
1920x1080 Low 91
1920x1080 Medium 57
1920x1080 High 53
1920x1080 Ultra 44

Overpower with Intel Core i5-14600KF + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis

The Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 3050 4 GB presents a striking imbalance in Overpower. The data reveals a configuration where a high-end 14-core processor is consistently held back by a GPU that struggles to maintain fluid frame rates even at modest settings. This analysis examines the measured FPS data to understand the nature of this bottleneck, the scaling of performance across resolutions, and the practical implications for gameplay.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data for this combo in Overpower shows a clear pattern of performance degradation as resolution increases, but the rate of that degradation is the key indicator of where the system's weakness lies. At 1080p with Low settings, the combo achieves an average of 91 FPS. Moving to 1440p drops that average to 81 FPS, a reduction of 10 FPS. Stepping up to 4K further reduces the average to 69 FPS. This progression from 1080p to 4K represents a 24% decrease in performance from the lowest resolution to the highest.

The scaling becomes even more telling when examining the higher settings presets. At Medium settings, the average FPS goes from 57 at 1080p, to 51 at 1440p, and finally to 43 at 4K. The High preset follows a similar trajectory: 53 FPS at 1080p, 47 FPS at 1440p, and 40 FPS at 4K. In each case, the performance drop from 1080p to 1440p is roughly 6 FPS, while the drop from 1440p to 4K is slightly larger, at around 7-8 FPS. This consistent and relatively linear scaling indicates that the system is not becoming dramatically more bottlenecked at higher resolutions, which would be the case if the CPU were the limiting factor.

Instead, the data strongly suggests that the NVIDIA GeForce RTX 3050 4 GB is the primary constraint across all tested configurations. The fact that even at 1080p Low settings, the system only manages 91 FPS—a figure that is respectable but not exceptional—implies that the GPU is already working near its full capacity. If the Intel Core i5-14600KF were the bottleneck, we would expect to see a much wider gap between the 1080p and 4K results, as the CPU's workload does not scale significantly with resolution. The relatively modest FPS loss of 22 FPS between 1080p Low and 4K Low suggests that the GPU is consistently saturated, making it the definitive limiting component in this pairing for Overpower.

FAQ

*Q: What is the best average frame rate this combo can achieve in Overpower?*

A: The highest average FPS recorded is 91, which occurs at 1920x1080 resolution with Low settings.

*Q: How does the combo perform at 4K resolution in Overpower?*

A: At 3840x2160, the average frame rates range from 33 FPS on Ultra settings to 69 FPS on Low settings. The Medium preset yields an average of 43 FPS, with a minimum of 37 and a maximum of 50.

Q: Is the CPU or GPU the primary bottleneck for this configuration?

A: The benchmark results indicate the GPU is the limiting factor. The frame rates scale consistently with resolution and settings, a pattern typical of GPU-bound scenarios, particularly given the modest performance at 1080p Low (91 FPS).

Q: What is the difference in average FPS between 1080p and 1440p on High settings?

A: At 1920x1080 with High settings, the average FPS is 53. At 2560x1440 with High settings, the average FPS drops to 47, a difference of 6 FPS.

Q: Does the combo provide a playable experience at 1440p on Medium settings?

A: Yes, at 2560x1440 with Medium settings, the combo achieves an average of 51 FPS, with a minimum of 43 FPS and a maximum of 59 FPS, indicating a generally smooth experience with occasional dips.

Q: How does the 4K Medium performance compare to the 4K Low performance?

A: The 4K Medium preset produces an average of 43 FPS, while the 4K Low preset produces an average of 69 FPS. This represents a 26 FPS difference, showing a significant performance cost for the higher visual quality settings.

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core i5-14600KF is a formidable processor on paper, featuring 14 cores and 20 threads, with a base clock of 3.50 GHz and a boost clock of 5.30 GHz. Its architecture, Raptor Lake, built on a 10 nm process, places it in the 90th percentile when compared to all CPUs, indicating it is a high-performing part in synthetic benchmarks. Its Cinebench R23 multi-core score of 32544 and single-core score of 4594 further underscore its capability for demanding workloads.

However, the measured FPS data in Overpower tells a different story. The performance in the game is far below what this CPU is capable of driving. The consistent frame rates across resolutions, with only a 22 FPS difference between 1080p Low and 4K Low, are a classic symptom of a GPU bottleneck. The CPU is likely idling, waiting for the RTX 3050 to finish rendering each frame. The fact that the combo ranks 3268 out of 3713 tested combinations reinforces this, showing that despite having a powerful CPU, the overall gaming performance is dragged down by the graphics card.

The CPU's 24 MB of shared L3 cache and dual-channel memory support for DDR4 and DDR5 are excellent features for gaming, but they are not being fully utilized here. The data suggests that in this specific game, the processor's capabilities are essentially irrelevant to the final frame rate. The bottleneck is so pronounced that the CPU's 5.30 GHz boost clock offers no tangible benefit in Overpower because the system is never waiting on the processor to complete its work. The game's performance is entirely dictated by the GPU's output.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data provides a comprehensive view of this combo's capabilities across a grid of resolutions and settings. At 1920x1080, the performance is the strongest. The Low preset delivers an average of 91 FPS, which is the highest of any configuration. The Medium preset averages 57 FPS, with a minimum of 49 and a maximum of 66. The High preset averages 53 FPS, and the Ultra preset drops to 44 FPS. This shows that at 1080p, the combo can handle Low settings with ease, but even Medium settings result in a significant performance penalty.

Moving to 2560x1440, the frame rates decrease across the board. The Low preset averages 81 FPS, still a playable figure. The Medium preset averages 51 FPS, with a minimum of 43 and a maximum of 59. The High preset averages 47 FPS, while the Ultra preset averages 39 FPS. The gap between Low and Ultra at 1440p is 42 FPS, which is substantial and highlights the GPU's struggle with higher fidelity settings. At this resolution, the combo begins to feel less comfortable for fast-paced action, as even the Medium preset is only marginally above the 60 FPS threshold.

At 3840x2160, the GPU is clearly overburdened. The Low preset is the only one that approaches playability, with an average of 69 FPS. The Medium preset falls to an average of 43 FPS, with a minimum of 37 and a maximum of 50. The High preset averages 40 FPS, and the Ultra preset bottoms out at 33 FPS. None of the settings above Low at 4K provide a consistently smooth experience, and the Ultra preset, in particular, is likely to feel stuttery and unresponsive. The data from all twelve measured points paints a clear picture of a component that is out of its depth at higher resolutions and settings.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combo of the Intel Core i5-14600KF and the NVIDIA GeForce RTX 3050 4 GB ranks 3268 out of 3713 tested combinations in Overpower. This places it in the bottom 12% of all systems tested, a surprisingly low position for a CPU that is in the 90th percentile of all processors. This discrepancy is a powerful illustration of how a weak GPU can negate the advantages of a strong CPU in a gaming workload.

This ranking suggests that the vast majority of other tested combos, many of which likely feature less powerful CPUs, outperform this specific pairing. The reason is clear: the RTX 3050 4 GB acts as a severe performance cap. The data implies that even a system with a much more modest CPU would likely achieve similar frame rates in Overpower, as the game is not demanding on the processor but is heavily dependent on the graphics card. The ranking serves as a cautionary tale about the importance of a balanced system, where the GPU budget is not severely undersized relative to the CPU. In this case, the CPU's potential is entirely wasted, as it can never be fully utilized by the game.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS data, the optimal settings for this combo depend heavily on the target resolution. For a consistent 60 FPS or higher experience, the only viable option is 1080p with Low settings, which yields an average of 91 FPS. This is the only configuration in the entire dataset that provides a significant performance headroom above the 60 FPS mark. At 1440p, the Low preset averages 81 FPS, which is also a smooth experience, but the visual quality is lower.

If a player wishes to prioritize visual fidelity over raw frame rate, the Medium preset at 1080p, with an average of 57 FPS, is the best balance. It provides a noticeable visual boost over Low while maintaining an average frame rate that is close to the 60 FPS target, with minimums still in the high 40s. The High preset at 1080p (53 FPS) and the Medium preset at 1440p (51 FPS) are also playable, but they offer diminishing returns in visual quality for the additional performance cost.

At 4K, the data strongly advises against using any setting above Low. The 69 FPS average on Low is the only playable option, while Medium (43 FPS), High (40 FPS), and Ultra (33 FPS) all fall well below the threshold for a smooth experience. For the best overall experience, the data suggests that 1440p Low is the sweet spot, offering a higher resolution than 1080p while still maintaining a robust average frame rate of 81 FPS. This provides a clear upgrade in image clarity over 1080p without the significant performance hit seen at 4K.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 3050 4 GB is the undoubted limiting factor in this configuration. Its specifications, including a 4 GB GDDR6 memory size, a 128-bit memory bus, and a memory bandwidth of 192.0 GB/s, are modest for modern gaming. The GPU's base clock of 1545 MHz and boost clock of 1740 MHz are adequate, but the small memory capacity and narrow bus width create a significant performance ceiling. The 4 GB of VRAM is likely a primary culprit, as Overpower at higher resolutions and settings can easily exceed this amount, forcing the GPU to use slower system memory and causing stutters and frame drops.

The data supports this theory. The sharp decline in performance from Low to Medium settings at the same resolution suggests a memory bandwidth or capacity constraint. For instance, at 1080p, the FPS drops from 91 on Low to 57 on Medium, a 34 FPS difference. This is a massive penalty for what should be a moderate increase in visual complexity. Similarly, the 4K Medium preset's minimum FPS of 37, compared to the 4K Low average of 69, indicates that the GPU is unable to handle the data load required by higher detail textures and effects.

With 2048 shading units and 32 ROPs, the GPU's compute power is not the primary issue; rather, it is the inability to feed those units with enough data quickly enough. The FP32 performance of 7.127 TFLOPS is respectable for a budget card, but it is rendered moot by the memory constraints. The GPU is clearly not a match for the CPU in this pairing, and the measured FPS results are a direct consequence of its limited memory subsystem and overall performance class. The 90 W TDP and suggested 250 W PSU confirm its position as an entry-level component, which is inconsistent with the high-end processor it is paired with.

Hardware Specifications

Intel Core i5-14600KF

Cores / Threads 14 / 20
Base Clock 3500 MHz
Boost Clock 5300 MHz
TDP 125W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 3050 4 GB

VRAM 4 GB GDDR6
Base Clock —
Boost Clock 1740 MHz MHz
TDP 90 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-14600KF + NVIDIA GeForce RTX 3050 4 GB in Overpower

Resolution Settings Avg FPS
3840x2160 Low 69.0
3840x2160 Medium 43.0
3840x2160 High 40.0
3840x2160 Ultra 33.0
2560x1440 Low 81.0
2560x1440 Medium 51.0
2560x1440 High 47.0
2560x1440 Ultra 39.0
1920x1080 Low 91.0
1920x1080 Medium 57.0
1920x1080 High 53.0
1920x1080 Ultra 44.0

Overpower with RTX 3050 4 GB + Other CPUs

See how Overpower performs with the same GPU but different processors.

Other Games with ii5-14600KF + RTX 3050 4 GB

Explore FPS benchmarks for other games using this same hardware combination.