Archeage

Archeage

AVERAGE FPS
45
playable

This combination offers playable performance with an average of 45 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 16 23 30 38
1440p QHD 22 37 53 60
1080p Full HD 35 56 82 90

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 38
3840x2160 Medium 30
3840x2160 High 23
3840x2160 Ultra 16
2560x1440 Low 60
2560x1440 Medium 53
2560x1440 High 37
2560x1440 Ultra 22
1920x1080 Low 90
1920x1080 Medium 82
1920x1080 High 56
1920x1080 Ultra 35

Archeage with Intel Core i5-14600KF + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis

The Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 3050 4 GB presents a study in contrast for Archeage. The CPU is a high-end 14-core processor, while the GPU is an entry-level Ampere card with a 4 GB memory buffer. The measured frame rates across resolutions and settings reveal a system that is heavily constrained by its graphics card, yet the CPU ensures that lower settings deliver highly playable results. This analysis breaks down the measured data to show exactly where the bottleneck lies and how to configure the game for the best experience.

Resolution Scaling

The frame rate data shows a steep decline as resolution increases, which is the classic signature of a GPU-bound system. At 1080p with Low settings, the average FPS is 90.4. Moving to 1440p Low drops that to 60.1, a 33.5% decrease. At 4K Low, the average falls to 38.1, which is 57.9% lower than the 1080p figure. This consistent, dramatic drop with every resolution increase indicates that the render resolution is the primary factor limiting performance, not the processor.

The scaling becomes even more severe at higher quality presets. With High settings, the 1080p average is 55.5 FPS, which falls to 36.6 FPS at 1440p (a 34.1% drop) and then to 22.8 FPS at 4K (a 58.9% drop from 1080p). The pattern is identical to the Low preset, confirming that the GPU's rendering pipeline is saturated. The RTX 3050's 4 GB memory and 192.0 GB/s bandwidth are likely the limiting factors, as the fill rate demand of higher resolutions quickly overwhelms the card's capabilities.

The most telling data point is the gap between 1080p and 4K at the Medium preset. The 1080p Medium average is 82.4 FPS, while the 4K Medium average is 29.7 FPS. This 52.7 FPS loss is a 64% reduction in performance. This steep curve suggests that players targeting 4K will find even the Medium preset to be a struggle, as the GPU simply cannot maintain a smooth frame rate. The data clearly shows that this combination is designed for 1080p gaming; at that resolution, the GPU can keep up with the CPU's demands, but at 1440p and 4K, the graphics card becomes the absolute bottleneck.

CPU Role

The Intel Core i5-14600KF is a formidable processor with 14 cores and 20 threads, boosting up to 5.30 GHz. Its benchmark scores reflect its strength, with a Cinebench R23 multi-core score of 32889 and a single-core score of 4643. In Archeage, an MMORPG that often relies on a few heavily loaded threads for game logic and draw calls, the i5-14600KF's high single-thread performance is a significant asset. The data suggests this CPU is not the limiting factor in any of the measured scenarios.

The evidence for this lies in the FPS scaling at 1080p. At Low settings, the average is 90.4 FPS. At Medium, it is 82.4 FPS, and at High, it is 55.5 FPS. These are large differences based purely on graphical settings. If the CPU were the bottleneck, we would expect to see similar frame rates across these presets, as the CPU workload would remain constant. Instead, the FPS falls in lockstep with the GPU workload, indicating that the i5-14600KF is able to feed the GPU with data fast enough at all times.

The CPU's 24 MB of shared L3 cache and 2 MB per-core L2 cache also help with MMO scenarios where many entities and player states need to be tracked. While the base clock of 3.50 GHz is modest, the boost to 5.30 GHz provides ample headroom for the game's primary thread. In the context of this combo, the i5-14600KF's role is to ensure that the RTX 3050 is never waiting for instructions, which it does successfully, as even the most demanding 4K Ultra setting yields 15.8 FPS, a number that is clearly limited by the GPU's pixel and texture throughput, not by CPU compute.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is the decisive component in this pairing. With a 4 GB GDDR6 memory buffer on a 128-bit bus, it offers 192.0 GB/s of bandwidth. The 2048 shading units and 32 ROPs are modest by modern standards, and the data shows that this hardware is quickly overwhelmed as resolution and quality settings increase. The GPU's percentile rank of 50 among all GPUs confirms its mid-range standing, and its performance in Archeage is consistent with that classification.

The GPU's role is most apparent at 4K. At 4K Ultra, the average FPS is just 15.8, which is unplayable. At 4K High, it is 22.8 FPS, and at 4K Medium, it is 29.7 FPS. Even at 4K Low, the card only manages 38.1 FPS. These numbers indicate that the 4 GB VRAM buffer is likely being exhausted at this resolution, forcing the card to use slower memory spillover or reduce texture quality, which tanks performance. The 4K results are a clear indication that this GPU is not suited for 4K gaming in this title.

At 1440p, the GPU shows it can handle lower presets, with a Low average of 60.1 FPS and a Medium average of 52.8 FPS. However, pushing to High drops the average to 36.6 FPS, and Ultra falls to 22.4 FPS. The 1080p results are where the GPU finally finds its comfort zone, delivering 90.4 FPS on Low and 82.4 FPS on Medium. The High preset at 1080p yields 55.5 FPS, which is still playable. The boost clock of 1740 MHz helps at 1080p, but the card's fundamental architecture—8 nm process, 200 mm² die—limits its ability to scale beyond that resolution.

How This Combo Ranks

In the grand scheme of tested hardware combinations, this specific pairing ranks 1568 out of 1727 combos for Archeage. This places it in the bottom 9.2% of all tested systems, a poor showing that underscores the mismatch between the high-end CPU and the low-end GPU. The combo rank reflects the overall gaming experience, which is dominated by the GPU's limitations.

This rank is not a reflection of the CPU's capability, as the i5-14600KF sits in the 93rd percentile of all CPUs. The bottleneck is unequivocally the GPU. The data suggests that a user with this CPU could achieve a significantly better combo rank by pairing it with a more powerful graphics card, as the processor has plenty of headroom. As it stands, the combo performs like a mid-range 1080p machine, which is below the expectations set by the CPU's presence. The performance is limited to what the RTX 3050 can deliver, and the ranking correctly identifies that this is a low-tier gaming setup when compared to the full spectrum of possible CPU/GPU pairings.

FAQ

Q: Can this combo run Archeage at 4K?

A: The data shows it is not viable. The best 4K result is 38.1 FPS on Low settings, which dips to 15.8 FPS on Ultra. All 4K averages are below the 60 FPS threshold, indicating a poor experience.

Q: What is the best resolution for this setup?

A: 1920x1080 is the only resolution where the combo delivers consistently playable frame rates. The Low preset averages 90.4 FPS, and Medium averages 82.4 FPS, which are both smooth.

Q: How does the CPU's performance compare to its rivals?

A: The i5-14600KF has an average benchmark score of 49367. It is 0.4% ahead of the Intel Core i5-14600K, 0.6% ahead of the AMD Ryzen 9 5950X, 1.4% ahead of the Intel Xeon Gold 5318H, and 0.5% behind the AMD EPYC 4345P.

Q: Is the CPU or GPU the limiting factor in this game?

A: The data identifies the GPU as the clear bottleneck. The frame rate drops by more than half when moving from 1080p to 4K at the same settings, which is a GPU limitation. The CPU has sufficient performance to feed the GPU at all tested settings.

Q: What is the worst performing setting combination?

A: The worst result is at 3840x2160 with Ultra settings, which produces an average of 15.8 FPS. This is the lowest measured performance and is unplayable.

Q: Is there a big difference between Low and Medium settings at 1080p?

A: The difference is small in terms of playability. Low averages 90.4 FPS, while Medium averages 82.4 FPS, a difference of 8 FPS. Both are well within the playable range, so the visual upgrade from Medium is likely worth the minor performance cost.

Settings Recommendations

The measured data provides a clear guide for configuring this system. For the primary target resolution of 1920x1080, the Medium preset offers the best balance of visual quality and performance, averaging 82.4 FPS. This is a significant improvement over the High preset, which drops to 55.5 FPS, and it is far smoother than the Ultra preset, which averages only 34.7 FPS. The Medium preset is the recommended choice for a consistent experience above the 60 FPS mark.

For users who prioritize maximum frame rate, the Low preset at 1080p delivers an average of 90.4 FPS, which provides a substantial buffer for chaotic MMO battles where frame times can spike. The High preset at 1080p, with an average of 55.5 FPS, is borderline; it is playable but will be more sensitive to demanding scenes. At 2560x1440, the Low preset is the only option that maintains a playable frame rate, averaging 60.1 FPS. The Medium preset at this resolution averages 52.8 FPS, which is acceptable but not ideal. The data suggests avoiding 4K entirely; even Low settings only produce 38.1 FPS, which is too inconsistent for a smooth experience. For this combo, 1080p Medium is the sweet spot, with 1080p Low as the fallback for maximum smoothness.

Hardware Specifications

Intel Core i5-14600KF

Cores / Threads 14 / 20
Base Clock 3500 MHz
Boost Clock 5300 MHz
TDP 125W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 3050 4 GB

VRAM 4 GB GDDR6
Base Clock —
Boost Clock 1740 MHz MHz
TDP 90 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-14600KF + NVIDIA GeForce RTX 3050 4 GB in Archeage

Resolution Settings Avg FPS
3840x2160 Low 38.1
3840x2160 Medium 29.7
3840x2160 High 22.8
3840x2160 Ultra 15.8
2560x1440 Low 60.1
2560x1440 Medium 52.8
2560x1440 High 36.6
2560x1440 Ultra 22.4
1920x1080 Low 90.4
1920x1080 Medium 82.4
1920x1080 High 55.5
1920x1080 Ultra 34.7

Archeage with RTX 3050 4 GB + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with ii5-14600KF + RTX 3050 4 GB

Explore FPS benchmarks for other games using this same hardware combination.