Overpower
This combination offers playable performance with an average of 54 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 33 | 40 | 43 | 69 |
| 1440p QHD | 39 | 47 | 51 | 81 |
| 1080p Full HD | 44 | 53 | 57 | 91 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with Intel Core i5-14600K + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
# Overpower — Intel Core i5-14600K + NVIDIA GeForce RTX 3050 4 GB
This combination pairs a 14-core, 20-thread Intel Core i5-14600K with a 4 GB NVIDIA GeForce RTX 3050, producing a system that sits near the bottom of the tested hierarchy for Overpower. With a combo rank of 3268 out of 3713 tested configurations, the data places this pairing in the 12th percentile of all systems measured — a result that reflects the GPU's modest specifications far more than the CPU's considerable compute potential. The benchmark results reveal a consistent pattern: the RTX 3050 4 GB becomes the limiting factor early, and the i5-14600K's headroom goes largely untapped across all tested resolutions.
Resolution Scaling
The measured FPS data shows how sharply performance degrades as resolution climbs from 1080p to 4K. At 1080p with Low settings, the combo averages 91 FPS — a playable figure that suggests the system can handle the game at entry-level settings. Moving to 1440p Low drops that to 81 FPS, a 11% reduction, while 4K Low falls to 69 FPS, representing a 24% total decline from the 1080p baseline. The scaling becomes more punishing at higher settings: 1080p High delivers 53 FPS, 1440p High drops to 47 FPS (an 11% loss), and 4K High falls to 40 FPS (a 25% loss from 1080p). This pattern — where the percentage drop from 1080p to 4K remains nearly identical across Low and High settings — indicates a GPU-bound scenario throughout. The RTX 3050 4 GB's 192.0 GB/s memory bandwidth and 128-bit bus width are the structural constraints here; as pixel count quadruples from 1080p to 4K, the GPU must move vastly more data through a relatively narrow interface.
The data reveals that resolution scaling is almost perfectly linear in relative terms, suggesting the CPU is never the bottleneck. If the i5-14600K were limiting performance, we would expect to see smaller absolute FPS gaps at lower resolutions where CPU overhead matters more; instead, the consistent ~25% drop from 1080p to 4K across settings points squarely at the GPU. At 1080p Low, the 91 FPS figure is still well below what the CPU's 5.30 GHz boost clock and 24 MB shared L3 cache could theoretically feed into a more powerful graphics card. The question the data raises is whether any setting combination at any resolution can shift the balance toward the CPU — and the answer appears to be no, given that even the lowest workload at 1080p leaves the GPU as the clear limiting component.
GPU Role
The NVIDIA GeForce RTX 3050 4 GB is built on the GA107 chip with 2048 shading units, 64 texture mapping units, and 32 ROPs. Its base clock runs at 1545 MHz with a boost clock of 1740 MHz, while the 4 GB of GDDR6 memory operates at 1500 MHz (12 Gbps effective) across a 128-bit bus, yielding 192.0 GB/s of bandwidth. These specifications place the GPU at the 50th percentile among all GPUs tested, and the measured performance in Overpower reflects this middling position. The 4 GB memory capacity is a particular concern for a 2023 action game; at 4K Ultra, the combo manages only 33 FPS, and at 1440p Ultra it reaches 39 FPS, suggesting the game's texture and geometry demands strain the limited frame buffer.
The FP32 throughput of 7.127 TFLOPS and pixel rate of 55.68 GPixel/s provide the raw computational foundation, but the memory subsystem appears to be the decisive factor in Overpower's results. The 128-bit bus width and 192.0 GB/s bandwidth are modest by modern standards, and the data shows that higher settings — which typically increase memory pressure — cause disproportionate FPS drops. At 1080p, moving from Low (91 FPS) to Medium (57 FPS) costs 34 FPS, while the jump from Medium to High (53 FPS) costs only 4 FPS, and High to Ultra (44 FPS) costs 9 FPS. This non-linear scaling suggests that once the game's working set exceeds the 4 GB VRAM, the system resorts to slower memory swapping, flattening the performance curve in unexpected ways. The RTX 3050's 16 RT cores and 64 tensor cores are present but appear to offer little advantage here, as Overpower's rasterization load dominates the measured results.
CPU Role
The Intel Core i5-14600K brings substantial processing power to this pairing: 14 cores (6 performance and 8 efficient) with 20 threads, a base clock of 3.50 GHz, and a boost clock of 5.30 GHz. The CPU's cache hierarchy includes 80 KB L1 per core, 2 MB L2 per core, and 24 MB shared L3, which provides ample capacity for game logic and physics calculations. In synthetic benchmarks, the i5-14600K scores 24,491 in Cinebench R23 multi-core and 2,064 in single-core, with a Geekbench multi-core score of 16,673 and single-core of 2,491. Its average benchmark score of 48,618 places it at the 90th percentile among all CPUs, with nearest rivals including the Intel Xeon Gold 5318H (48,698, -0.2% delta) and AMD EPYC 4345P (48,470, +0.3% delta).
Yet in Overpower, the CPU's capabilities are largely irrelevant to the measured frame rates. The data shows that at every resolution and settings combination, the FPS figures align with what a mid-range GPU would deliver, not what a top-10-percentile CPU could support. At 1080p Low, the 91 FPS average is likely constrained by the GPU's fill rate and memory bandwidth rather than the CPU's ability to feed draw calls. The i5-14600K's 20 threads and 5.30 GHz boost clock would be more than sufficient for Overpower's action-game mechanics, which typically rely on a handful of threads for game logic and physics. The Passmark multi-thread score of 38,682 and single-thread score of 4,270 confirm the CPU's strength, but the benchmark results in this game show no scenario where CPU performance becomes the deciding factor. This is a classic imbalance: a CPU that could drive 200+ FPS in many titles paired with a GPU that tops out at 91 FPS in this game's most favorable settings.
How This Combo Ranks
The combo rank of 3268 out of 3713 tested systems places this configuration in the bottom 12% of all combinations measured for Overpower. This ranking reflects the RTX 3050 4 GB's limitations more than the i5-14600K's strengths; the CPU sits at the 90th percentile of all processors, while the GPU sits at exactly the 50th percentile. The disparity between these two percentiles — a 40-point gap — is among the widest possible in the database, and the resulting frame rates confirm that the pairing is mismatched for this game. Compared to other combos in the database, this system would be outclassed by any pairing that uses a more capable GPU with a similar or even weaker CPU, because Overpower's measured FPS scales almost entirely with GPU performance.
The rank also suggests that users who purchased this combo for Overpower specifically would find themselves near the bottom of the performance distribution. The 3713 total combos tested for this game include a wide range of hardware, and ranking 3268 means roughly 88% of tested systems deliver higher average frame rates. The data does not show what those higher-ranked systems use, but the pattern in the measured FPS — with the GPU as the clear bottleneck — implies that upgrading the graphics card alone would dramatically improve the rank, while upgrading the CPU would yield negligible gains in this title. The i5-14600K's nearest rivals in synthetic benchmarks, such as the Intel Core Ultra 5 245HX (48,287, +0.7% delta) or Intel Core Ultra 5 245 (48,995, -0.8% delta), would likely produce identical Overpower results when paired with the same GPU, further confirming the CPU's non-factor status in this game.
Measured FPS Breakdown
At 1920x1080, the resolution most likely to favor this combo, the measured averages are: Low settings 91 FPS, Medium 57 FPS (with min/max of 49/66), High 53 FPS, and Ultra 44 FPS. The 1080p Medium row is the only one in the entire dataset with a recorded minimum of 49 FPS and maximum of 66 FPS, indicating some frame-time variance at this setting. The gap between Low and Medium is substantial at 34 FPS, suggesting that Low settings avoid a significant computational or memory load that Medium introduces. The transition from Medium to High costs only 4 FPS, which is surprisingly small, while High to Ultra costs 9 FPS. This suggests that Medium may be the settings sweet spot where the GPU's resources are efficiently utilized without hitting the 4 GB VRAM ceiling.
At 2560x1440, the averages are: Low 81 FPS, Medium 51 FPS (min/max 43/59), High 47 FPS, and Ultra 39 FPS. The drop from 1080p to 1440p at Low settings is 10 FPS (91 to 81), while at Medium it is 6 FPS (57 to 51), at High it is 6 FPS (53 to 47), and at Ultra it is 5 FPS (44 to 39). The smaller absolute drops at higher settings are notable — they imply that the game is already so demanding at those settings that the additional resolution has less relative impact. At 3840x2160, the averages fall further: Low 69 FPS, Medium 43 FPS (min/max 37/50), High 40 FPS, and Ultra 33 FPS. The 4K Ultra result of 33 FPS is below the 30 FPS threshold only by a small margin, making it technically playable but far from smooth. The 4K Medium row shows a minimum of 37 FPS, which means the system occasionally dips below 40 FPS even at mid-range settings, which could cause noticeable stutter in fast-paced action sequences.
Settings Recommendations
The measured data points to Medium settings as the most balanced option across all resolutions. At 1080p Medium, the combo delivers 57 FPS with a recorded minimum of 49 FPS — the only settings level in the entire dataset that maintains a minimum above 48 FPS at any resolution. This suggests that Medium settings avoid the VRAM or bandwidth bottlenecks that plague High and Ultra, while still providing a visually richer experience than Low. The 49 FPS minimum is comfortably above the 30 FPS playability threshold and close to the 60 FPS target, making it the safest choice for consistent frame delivery. At 1440p Medium, the 51 FPS average with a 43 FPS minimum is also viable, though the lower minimum indicates more frame-time variability; users with 1440p displays should consider this the ceiling for reliable performance.
For users prioritizing frame rate over visual fidelity, Low settings at 1080p yields 91 FPS, which is the only configuration in the dataset that approaches high-refresh-rate territory. The 69 FPS result at 4K Low is also noteworthy — it shows that even at 4K, dropping to Low settings can produce playable frame rates, though the visual compromise is significant for a 2023 action game. Ultra settings are not recommended at any resolution: the best Ultra result is 44 FPS at 1080p, and the 33 FPS at 4K Ultra is borderline unplayable. The data indicates that the RTX 3050 4 GB simply does not have the memory bandwidth or capacity to handle Ultra presets in Overpower, and the modest FPS gains from High to Medium (4-6 FPS depending on resolution) make High a poor trade-off when Medium offers better frame stability.
FAQ
Q: What is the best resolution and settings combination for this hardware in Overpower?
A: The data shows 1920x1080 with Medium settings delivers 57 FPS average with a minimum of 49 FPS, which is the most consistently playable configuration. At 1440p Medium, the average drops to 51 FPS with a 43 FPS minimum, which is also viable but less stable.
Q: Can this system handle 4K gaming in Overpower?
A: At 4K Low settings, the combo achieves 69 FPS average, and at 4K Medium it drops to 43 FPS with a 37 FPS minimum. Ultra settings at 4K produce only 33 FPS, suggesting 4K is only practical at Low or Medium settings.
Q: Why does the FPS drop so much from Low to Medium settings?
A: At 1080p, the average falls from 91 FPS on Low to 57 FPS on Medium, a 34 FPS reduction. This suggests Medium settings introduce a significant increase in GPU workload, likely related to texture and shading complexity that strains the 4 GB memory capacity and 192.0 GB/s bandwidth.
Q: Is the Intel Core i5-14600K holding back the RTX 3050 4 GB?
A: No, the data indicates the opposite. The CPU ranks at the 90th percentile of all processors with a 5.30 GHz boost clock, while the GPU ranks at the 50th percentile. The consistent FPS scaling across resolutions points to the GPU as the limiting component.
Q: What is the highest FPS this combo can achieve in Overpower?
A: The maximum measured average is 91 FPS at 1920x1080 with Low settings. No other configuration in the dataset exceeds this figure, and the highest minimum FPS recorded is 49 FPS at 1080p Medium.
Q: How does this combo rank compared to all tested systems for Overpower?
A: The combo ranks 3268 out of 3713 tested combinations, placing it in the bottom 12% of systems. This ranking reflects the GPU's limitations, as the CPU alone would rank much higher based on its 90th percentile synthetic benchmark position.
Hardware Specifications
Intel Core i5-14600K
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-14600K + NVIDIA GeForce RTX 3050 4 GB in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 69.0 |
| 3840x2160 | Medium | 43.0 |
| 3840x2160 | High | 40.0 |
| 3840x2160 | Ultra | 33.0 |
| 2560x1440 | Low | 81.0 |
| 2560x1440 | Medium | 51.0 |
| 2560x1440 | High | 47.0 |
| 2560x1440 | Ultra | 39.0 |
| 1920x1080 | Low | 91.0 |
| 1920x1080 | Medium | 57.0 |
| 1920x1080 | High | 53.0 |
| 1920x1080 | Ultra | 44.0 |
Overpower with RTX 3050 4 GB + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with ii5-14600K + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.