Overpower

The Intel Core i5-14600KF paired with the Intel Arc B570 presents a compelling mid-range combination for 2023’s action title Overpower. The measured data reveals a system that is heavily influenced by resolution and settings, with the GPU acting as the primary bottleneck at higher fidelity levels. This analysis breaks down the benchmark results to understand the scaling behavior, the combo’s relative standing, and the optimal way to play the game based solely on the provided facts.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data shows a clear and predictable drop as resolution increases, but the rate of that drop reveals which component is doing the heavy lifting. At Low settings, the average frame rate falls from 110 FPS at 1920x1080 to 98 FPS at 2560x1440, a reduction of 12 FPS (roughly 11%). Moving from 1440p to 3840x2160 at Low settings, the average drops from 98 FPS to 84 FPS, a further 14 FPS (about 14%). This relatively gentle curve suggests that even at 4K, the CPU is still capable of feeding the GPU, but the GPU is starting to feel the strain of the increased pixel count.

The scaling pattern changes dramatically when we look at Ultra settings. At 1080p Ultra, the combo produces 53 FPS. At 1440p Ultra, that number falls to 47 FPS (a drop of 6 FPS, or roughly 11%). However, the leap to 4K Ultra is punishing: the average FPS plummets to 40, a 7 FPS drop (about 15%) from 1440p. This steeper decline at the highest resolution and settings combination indicates that the Intel Arc B570’s 10 GB of GDDR6 memory and its 160-bit bus are being saturated, making the GPU the definitive limiting factor. The CPU, with its 14 cores and 20 threads, has ample headroom to process game logic and draw calls; the data implies it is the graphics card that cannot maintain frame rates as pixel fill-rate demands increase.

The Medium settings row provides a more granular look at this bottleneck. The average FPS at 1080p Medium is 69 FPS, with a minimum of 59 and a maximum of 79. At 1440p Medium, the average drops to 62 FPS (min 52, max 71), and at 4K Medium, it further reduces to 52 FPS (min 44, max 60). The consistent narrowing of the minimum and maximum frame rates at higher resolutions suggests that the GPU is becoming more consistently loaded, leaving less variance for the CPU to influence. The data strongly suggests that for a smooth experience at 4K, users must accept lower settings; the jump from Low to Medium at 4K costs 32 FPS (from 84 to 52), while the jump from Medium to High costs only 3 FPS (from 52 to 49), showing diminishing returns and a hard ceiling imposed by the graphics hardware.

How This Combo Ranks — use comboRankInGame vs other tested combos

In the database of tested combinations, this specific pairing of the Intel Core i5-14600KF and the Intel Arc B570 achieves a rank of 2373 out of 2980 combos for Overpower. This places it in the bottom 20% of all tested systems (the 79.6th percentile from the bottom), which is a surprisingly low standing for a modern CPU and GPU pairing. The data indicates that while this combo is capable of playable frame rates at many settings, its overall performance relative to the entire spectrum of tested hardware is modest.

To contextualize this rank, we can look at the individual component standings. The CPU itself is strong, with a percentileVsAllCpus of 90, meaning it performs better than 90% of all CPUs in the database. Its average benchmark score is 49394, placing it very close to rivals like the AMD Ryzen 9 7900 (49228, a 0.3% delta) and the AMD Ryzen 7 PRO 5755G (49196, a 0.4% delta). The GPU, however, is a different story. The Intel Arc B570 has a percentileVsAllGpus of 65, and its average benchmark score of 20556 places it in a dead heat with the NVIDIA GeForce RTX 3070 Mobile (20534, 0.1% delta) and the Intel Arc A750 (20582, -0.1% delta).

The disparity between the CPU's high percentile (90) and the GPU's lower percentile (65) explains the combo's poor overall rank. The processor is clearly not the bottleneck, but the graphics card is holding the system back from competing with combos that feature higher-tier GPUs. The data implies that in Overpower, the Arc B570’s performance is the anchor, dragging the combined rank down despite the i5-14600KF’s excellent computational power. This suggests that for this specific game, users prioritizing a high rank should focus on the GPU as the primary upgrade path.

Settings Recommendations — which preset gives the best experience per the measured rows

Analyzing the measured FPS rows, the optimal balance between visual fidelity and performance is found at Medium settings for most resolutions. At 1920x1080, the Medium preset delivers an average of 69 FPS, which is a 5 FPS improvement over High (64 FPS) and a significant 16 FPS jump over Ultra (53 FPS). The minimum frame rate of 59 FPS at 1080p Medium is also above the 60 FPS threshold for smooth gameplay, making it the most consistent choice for a high-refresh-rate monitor without sacrificing too much visual quality.

For 2560x1440, the Medium preset again proves to be the sweet spot, averaging 62 FPS with a minimum of 52 FPS. While not locked to 60 FPS, this is far more playable than the High preset (57 FPS) and significantly better than Ultra (47 FPS). The data suggests that High at 1440p is a marginal experience, but Medium provides a comfortable cushion. At 3840x2160, the situation becomes more constrained. The Low preset offers the only truly smooth experience at 84 FPS, but it sacrifices visual detail. The Medium preset at 4K averages 52 FPS, which is playable but with noticeable dips to 44 FPS. For a consistent 4K experience, Low is the only reliable option, but for a compromise, Medium offers a substantial visual upgrade over Low at a cost of 32 FPS.

The data strongly implies that Medium is the recommended preset for 1080p and 1440p, offering the best balance of image quality and frame rate stability. For 4K, users must choose between the high frame rate of Low or the richer visuals of Medium, accepting the frame rate dips. The Ultra preset is only viable at 1080p, where it still manages 53 FPS, but it is not recommended for higher resolutions due to sub-50 FPS averages.

FAQ

*Q: Is the Intel Core i5-14600KF or the Intel Arc B570 the main bottleneck in Overpower?*

A: The benchmark data indicates the GPU is the primary limiting factor. The CPU has a high percentile ranking (90) and strong multi-core scores, while the GPU’s percentile is lower (65). The steep FPS drops at 4K, especially from Low to Medium settings, point directly to the graphics card struggling with pixel fill-rate demands.

*Q: Can this combo run Overpower at 4K?*

A: Yes, but with caveats. At Low settings, it achieves an average of 84 FPS, which is very smooth. At Medium settings, the average drops to 52 FPS with a minimum of 44 FPS, which is playable but not consistently smooth. At High and Ultra, the frame rates fall to 49 and 40 FPS respectively, which is generally considered too low for a fluid action game.

Q: How does the CPU's performance compare to its closest rivals?

A: The i5-14600KF has an average benchmark score of 49394. This is nearly identical to the AMD Ryzen 9 7900, which scores 49228 (a 0.3% delta, meaning the Intel chip is slightly faster), and the AMD Ryzen 7 PRO 5755G, which scores 49196 (a 0.4% delta). It is also 0.8% faster than the Intel Core Ultra 5 245 (48995).

Q: How does the GPU's performance compare to its closest rivals?

A: The Intel Arc B570’s average benchmark score is 20556. This puts it in a virtual tie with the NVIDIA GeForce RTX 3070 Mobile (20534, a 0.1% delta) and the Intel Arc A750 (20582, a -0.1% delta). It is also very close to the NVIDIA Quadro M4000M (20480, a 0.4% delta).

Q: What is the best settings preset for a 1440p monitor?

A: The Medium preset is the best choice for 2560x1440. It delivers an average of 62 FPS with a minimum of 52 FPS, which is a better balance of performance and quality compared to High (57 FPS average) or Ultra (47 FPS average).

Q: What is the FPS difference between Low and Ultra settings at 1080p?

A: At 1920x1080, the Low preset averages 110 FPS, while the Ultra preset averages 53 FPS. This represents a performance drop of 57 FPS when moving from the lowest to the highest quality settings.

GPU Role — VRAM, clocks, and how they relate to this game's results

The Intel Arc B570 is a 10 GB GDDR6 graphics card with a 160-bit memory bus and a bandwidth of 380.0 GB/s. Its base and boost clocks are both 2500 MHz. These specifications are directly relevant to the FPS drops observed at 4K. The 10 GB VRAM capacity is sufficient for most games at 1080p and 1440p, but at 4K with higher quality textures, the memory bandwidth of 380.0 GB/s becomes a limiting factor. The data shows a significant FPS penalty when moving from 1440p to 4K at Medium settings (from 62 to 52 FPS), which is a classic sign of the GPU hitting a memory bandwidth wall.

The GPU’s compute capabilities, rated at 11.52 TFLOPS for FP32, are modest for a modern card. Its performance in the Passmark G3D benchmark is 14195, and its 3DMark Steel Nomad DX12 score is 2649. These scores, combined with its percentileVsAllGpus of 65, paint a picture of a mid-range card. In Overpower, this translates to an inability to maintain high frame rates at 4K Ultra, where the average FPS falls to 40. The card’s 80 ROPs and 144 TMUs are sufficient for 1080p gaming, but the data suggests they are overwhelmed by the pixel count at 4K. The fact that it rivals the RTX 3070 Mobile and the Arc A750 in average benchmark score suggests its performance class, and the in-game results align with that, showing it as a capable 1080p and 1440p card, but not a 4K powerhouse.

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core i5-14600KF features 14 cores (a mix of performance and efficiency cores) and 20 threads, with a base clock of 3.50 GHz and a boost clock of 5.30 GHz. It has 24 MB of shared L3 cache. This processor is a clear performance leader, with a percentileVsAllCpus of 90. Its multi-core scores are impressive: a Cinebench R23 multi-core score of 32544 and a Geekbench multi-core score of 17085. These numbers indicate that the CPU has no trouble handling the computational load of Overpower.

The CPU’s role in this combo is to provide a solid foundation that does not bottleneck the GPU. The FPS data supports this, as the frame rates are largely dictated by the resolution and settings, which are GPU-bound tasks. The CPU’s high single-thread performance (Cinebench R23 single-core score of 4594 and Geekbench single-core score of 2445) ensures that game logic and physics calculations are processed efficiently. The fact that the FPS drop from 1080p Low (110 FPS) to 4K Low (84 FPS) is only 26 FPS indicates that the CPU can still push high frame rates, but the GPU cannot keep up at higher resolutions. The data suggests that the i5-14600KF is more than adequate for this game, and its performance is not a limiting factor in any of the measured scenarios.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The following is the complete set of measured average FPS data for Overpower with the Intel Core i5-14600KF and Intel Arc B570:

• 3840x2160 (4K)
• Low: 84 FPS
• Medium: 52 FPS (min 44, max 60)
• High: 49 FPS
• Ultra: 40 FPS
• 2560x1440 (1440p)
• Low: 98 FPS
• Medium: 62 FPS (min 52, max 71)
• High: 57 FPS
• Ultra: 47 FPS
• 1920x1080 (1080p)
• Low: 110 FPS
• Medium: 69 FPS (min 59, max 79)
• High: 64 FPS
• Ultra: 53 FPS

These numbers show a consistent trend: the average FPS decreases as both resolution and settings quality increase. The Medium settings rows are the only ones with min/max data, showing that at this preset, there is a 16 FPS variance at 1080p (min 59, max 79), a 19 FPS variance at 1440p (min 52, max 71), and a 16 FPS variance at 4K (min 44, max 60). This variance indicates some scene-dependent complexity, but the overall averages provide a clear picture of the combo’s capabilities. The data confirms that 1080p is the most comfortable resolution for this pairing, with all presets above 50 FPS, while 4K is only playable on the Low preset.