Overpower

The AMD Ryzen 9 9900X3D paired with the AMD Radeon RX 570 is a combination defined by extreme asymmetry. The CPU is a current-generation, high-end 12-core processor with a 128 MB L3 cache, while the GPU is a 2017-era Polaris chip with 4 GB of VRAM. In Overpower, this pairing produces a predictable outcome: the RX 570 becomes the overwhelming bottleneck at every resolution and settings level. The data shows a system where the CPU’s potential is largely untapped, and the GPU dictates the entire performance envelope, struggling to maintain playable frame rates outside of the lowest settings at 1080p.

FAQ

Q: What is the best average frame rate this combo achieves in Overpower?

A: The highest average FPS recorded is 62, achieved at 1920x1080 with Low settings. This is the only configuration measured that crosses the 60 FPS threshold, indicating that the RX 570 can deliver a smooth experience only under the most minimal graphical load at the lowest resolution.

Q: How does the combo perform at 4K resolution?

A: At 3840x2160, performance is poor across all settings. The average FPS ranges from 23 on Ultra to 47 on Low. High and Medium settings yield 27 and 29 average FPS, respectively, which is below the threshold for comfortable playability.

Q: Is the Ryzen 9 9900X3D the limiting factor in this system for Overpower?

A: No. The benchmark results indicate the GPU is the limiting component. The RX 570’s average benchmark score is 28766, placing it in the 74th percentile, while the Ryzen 9 9900X3D’s average benchmark score is 54762, placing it in the 91st percentile. The CPU is a far more capable component relative to its peers than the GPU is to its own peers.

Q: What is the performance difference between Low and Ultra settings at 1080p?

A: At 1920x1080, moving from Low to Ultra settings results in a drop from 62 average FPS to 30 average FPS, a reduction of 32 FPS. This shows that the graphical settings have a profound impact on the RX 570, more than halving the frame rate at the highest preset.

Q: How does this combo rank among all tested combinations in Overpower?

A: The combo ranks 2866 out of 2980 tested combinations. This places it in the bottom 4% of all tested systems, highlighting that this specific CPU-GPU pairing is far from optimal for this game.

Q: What is the minimum FPS recorded for the Medium preset at 1440p?

A: At 2560x1440 with Medium settings, the average FPS is 35, with a minimum FPS of 29 and a maximum of 40. This data point shows that even the minimum frame rate dips below 30 FPS, indicating potential stuttering and inconsistent performance.

GPU Role

The AMD Radeon RX 570 is the sole arbiter of performance in this configuration. Its specifications, including a base clock of 1168 MHz and a boost clock of 1244 MHz, are modest by modern standards. More critically, its memory configuration is a severe constraint: 4 GB of GDDR5 on a 256-bit bus, providing 224.0 GB/s of bandwidth. This small VRAM pool is a primary suspect for the sub-30 FPS averages seen at 4K with High, Medium, and Ultra settings. At 3840x2160, the GPU is likely exceeding its memory capacity, leading to texture thrashing and severe frame rate degradation.

The GPU’s overall capability is reflected in its average benchmark score of 28766, which places it in the 74th percentile of all GPUs. Its nearest rivals, the AMD Radeon RX 6800M and the AMD Radeon RX 470, have average scores of 28874 and 28996, respectively, with deltaPct values of -0.4 and -0.8. This indicates the RX 570 is performance-wise nearly identical to these cards, all of which are older or mobile-oriented parts. In Overpower, this level of GPU performance translates directly to the measured FPS. The CPU, with its 12 cores, 24 threads, and 128 MB of L3 cache, has ample resources for the game’s logic and physics, but it cannot compensate for the GPU’s inability to render frames quickly. The data suggests that the Ryzen 9 9900X3D is effectively idling, waiting for the RX 570 to complete its work.

The GPU’s GCN 4.0 architecture, dating back to the Polaris generation, lacks modern features like dedicated ray tracing cores. While Overpower is an Action game, the benchmark results show that even without ray tracing, the GPU is overwhelmed. The RX 570’s FP32 performance of 5.095 TFLOPS is a hard ceiling on its pixel-pushing ability, and the measured pixel rate of 39.81 GPixel/s and texture rate of 159.2 GTexel/s further quantify its limits. The 4 GB frame buffer is the most significant bottleneck, as even the Medium preset at 1080p (39 average FPS) shows a significant drop from Low (62 average FPS), suggesting that the increased texture memory demands at Medium are already taxing the VRAM capacity.

Resolution Scaling

The performance scaling from 1080p to 4K clearly illustrates a GPU-bound scenario. At 1080p Low, the combo achieves 62 average FPS. Moving to 1440p Low, the average drops to 55 FPS, a modest 11% decrease. However, the most significant cliff is reached at 4K Low, where the average FPS falls to 47, a 24% decrease from 1440p and a 24% decrease from 1080p. This scaling pattern is the hallmark of a GPU that cannot handle the pixel count increase at higher resolutions.

The gap between settings widens as resolution increases, further confirming the GPU limit. At 1080p, the difference between Low and Ultra is 32 FPS (62 vs 30). At 1440p, the same difference is 28 FPS (55 vs 27). At 4K, the difference is 24 FPS (47 vs 23). While the absolute difference shrinks, the relative performance ceiling is clearly the GPU’s rendering throughput. The CPU’s performance is not the variable here; the Ryzen 9 9900X3D’s capabilities are constant across these tests. The fact that the average FPS at 4K Ultra is 23, just above the single-frame-per-second threshold, indicates the GPU is entirely saturated.

The data for the Medium preset provides additional insight. At 3840x2160, the Medium preset yields an average of 29 FPS with a minimum of 25 and a maximum of 34. At 2560x1440, the same preset produces 35 average FPS with a range of 29-40. At 1920x1080, it achieves 39 average FPS with a range of 33-45. The frame time variance, as shown by the min and max values, stays relatively consistent, suggesting that the bottleneck is consistent GPU load rather than intermittent CPU stalls. The resolution scaling data points to a single conclusion: the RX 570’s fillrate and memory bandwidth are insufficient for 1440p or 4K gaming in Overpower, and even at 1080p, only the Low preset provides a consistently smooth experience.

Settings Recommendations

Given the measured FPS data, the only viable settings for a playable experience are at 1920x1080 with Low. This configuration achieves 62 average FPS, which is the sole data point above the 60 FPS target. All other settings at 1080p fall below 40 average FPS: High (36), Medium (39), and Ultra (30). While Medium at 1080p offers a slightly higher average FPS than High, it is still below 40, which is not ideal for a fast-paced Action game.

At 2560x1440, the situation is more dire. The Low preset delivers 55 average FPS, which is playable but not ideal. The Medium preset at 1440p drops to 35 average FPS with a minimum of 29, which will be noticeable as stutter. High and Ultra at 1440p are not recommended, as they yield 32 and 27 average FPS, respectively. For a consistent experience, users should prioritize the Low preset at 1440p if they must use this resolution, accepting the visual fidelity loss.

At 3840x2160, no preset is recommended for playable performance. The Low preset provides 47 average FPS, which is below the 60 FPS target and may feel sluggish. High (27), Medium (29), and Ultra (23) are all well below 30 FPS, rendering the game effectively unplayable. The data suggests that the best experience, based on the measured rows, is unequivocally 1080p with Low settings. This is the only configuration that provides a frame rate high enough to ensure smooth gameplay without significant dips. The Medium preset at 1080p, while offering a marginal visual upgrade, does not provide a sufficient performance cushion, as its average FPS is only 39.

How This Combo Ranks

In the grand scheme of all tested combinations, this pairing of the Ryzen 9 9900X3D and RX 570 ranks 2866 out of 2980. This places it in the 96th percentile of worst-performing combos, meaning it is slower than 96% of all other tested systems in Overpower. This ranking is a stark indicator of the GPU’s limiting nature. The CPU, which ranks in the 91st percentile of all CPUs, is completely wasted in this configuration. The benchmark results show a system where a top-tier processor is hamstrung by a budget-level graphics card from a previous hardware generation.

The combo rank is not a reflection of the CPU’s capabilities but rather the GPU’s inability to utilize them. In a balanced system, the Ryzen 9 9900X3D would be paired with a GPU that can match its performance class. Here, the RX 570’s average benchmark score of 28766 is close to the AMD Radeon R9 M295X (28580), a mobile GPU, and the NVIDIA Quadro RTX 8000 (28421). This places the GPU in a performance bracket far below what the CPU can support. The result is a system that is severely imbalanced, and the data confirms this: the combo’s rank of 2866 out of 2980 is a clear verdict that this pairing should not be used for Overpower if any level of high fidelity or high resolution is desired. The CPU’s 3dmark_max_threads score of 13795 and cinebench_r23_multicore score of 47737 are irrelevant when the GPU cannot push frames beyond 62 FPS at the lowest settings.

Measured FPS Breakdown

The following is a complete breakdown of the measured average FPS, with minimum and maximum where available, for all resolution and settings combinations in Overpower.

1920x1080 (1080p)

• Ultra: 30 average FPS. This is the lowest result at 1080p, indicating the RX 570 cannot handle the highest preset even at the lowest resolution.
• High: 36 average FPS. A modest improvement over Ultra, but still below the 40 FPS threshold.
• Medium: 39 average FPS, with a minimum of 33 and a maximum of 45. This is the best-performing preset above Low, but it is still not smooth.
• Low: 62 average FPS. This is the highest average FPS recorded for this combo and the only one that is fully playable.

2560x1440 (1440p)

• Ultra: 27 average FPS. Performance degrades further, making the game feel sluggish.
• High: 32 average FPS. A slight improvement, but still below 30 FPS territory for minimums.
• Medium: 35 average FPS, with a minimum of 29 and a maximum of 40. The minimum dips below 30, indicating potential stutter.
• Low: 55 average FPS. This is the only playable option at 1440p, though it requires significant visual compromises.

3840x2160 (4K)

• Ultra: 23 average FPS. The worst performance recorded, yielding a slideshow-like experience.
• High: 27 average FPS. Still unplayable, with performance barely above 20 FPS.
• Medium: 29 average FPS, with a minimum of 25 and a maximum of 34. The minimum is critically low.
• Low: 47 average FPS. The best result at 4K, but still below the 60 FPS target and not recommended for a smooth experience.

The data is consistent: as resolution increases, average FPS drops. As settings increase, average FPS drops. The 1080p Low configuration is the sole outlier where the system performs adequately. Every other configuration results in average FPS below 60, and most are below 40. The conclusions are clear from the measured numbers: this combo is only suitable for 1080p gaming with the lowest settings, and any attempt to increase resolution or graphical fidelity will result in a subpar experience.