Overpower

The benchmark data for Overpower places the Intel Core i5-14600K and AMD Radeon RX 570 combination in a specific performance envelope. This pairing represents a significant CPU-side advantage that is heavily constrained by the legacy GPU, creating a scenario where frame rates are dictated almost entirely by graphics processing capabilities across all tested settings and resolutions. The data shows a system where the potential of the processor is largely untapped in this particular action title.

Resolution Scaling

The measured FPS values reveal a classic case of GPU-bound scaling as resolution increases. At the 1080p Low setting, the combo achieves an average of 64.6 FPS. This is the highest performance point recorded for this pairing. When the resolution is increased to 2560x1440 with the same Low settings, the average FPS drops to 54.6, a reduction of 10.0 frames per second (approximately 15.5% lower). The scaling continues to 3840x2160, where the Low setting yields 47.3 FPS, a further drop of 7.3 FPS from the 1440p result.

This pattern of diminishing returns as pixel count increases is consistent with a GPU operating at its limits. Moving from 1080p Low to 4K Low results in a total performance loss of 17.3 FPS, which is a 26.8% decrease from the starting point. The scaling is not linear, suggesting that the RX 570's memory bandwidth and pixel throughput are being saturated. For more demanding settings, the trend is similar but the absolute numbers are lower. At High settings, the average FPS goes from 34.1 at 1080p, to 34.9 at 1440p, and then down to 27.2 at 4K. Interestingly, the 1440p High result is slightly higher than the 1080p High result, a minor anomaly that could indicate a measurement variance or a specific driver behavior, but the overall trajectory is clear: performance degrades as resolution climbs.

The data indicates that the limiting component is unequivocally the graphics card. The CPU, with its high multi-threaded and single-threaded scores, is not the bottleneck. The substantial frame rate drops at higher resolutions and the relatively small performance gap between 1080p and 1440p at higher settings both point to the GPU being the primary constraint. The scaling behavior is typical of a graphics card with a 4 GB memory buffer and a 224.0 GB/s memory bandwidth, which is challenged by the increasing data demands of higher resolutions.

GPU Role

The AMD Radeon RX 570 is the decisive factor in this combo's gaming performance. Its specifications, including a base clock of 1168 MHz and a boost clock of 1244 MHz, are modest by modern standards. The GPU is built on the GCN 4.0 architecture with a 14 nm process node and features 2048 shading units. The memory configuration consists of 4 GB of GDDR5 on a 256-bit bus, providing 224.0 GB/s of bandwidth. These characteristics define its performance ceiling in Overpower.

The 4 GB VRAM capacity is a critical detail. In a 2023 action game, this amount of memory is likely insufficient for high-resolution, high-texture settings. This is reflected in the benchmark results. At 4K Ultra, the combo manages only 20.6 FPS, while at 1080p Ultra, it achieves 27.5 FPS. The difference between Low and Ultra settings is stark, with the 1080p Low result (64.6 FPS) being more than double the 1080p Ultra result (27.5 FPS). This indicates that the GPU is not only limited by compute power but also by memory capacity and bandwidth, which are heavily taxed by higher quality presets.

The GPU's benchmark scores place it in the 74th percentile of all GPUs, with an average score of 30158. Its nearest rivals in terms of average benchmark score include the NVIDIA GeForce RTX 5060 (0.2% higher), the AMD Radeon RX 7700 XT (0.2% higher), and the NVIDIA GeForce RTX 5070 Mobile (0.8% higher). This is a notable data point, as it suggests that in synthetic benchmarks, this older card is statistically comparable to much newer hardware, though this does not translate to real-world performance in a modern game like Overpower. The GPU's role is to be the limiting factor, and the FPS data confirms this, with the CPU's capabilities far exceeding what the RX 570 can utilize.

How This Combo Ranks

In the database of tested combinations, this pairing of the Intel Core i5-14600K and AMD Radeon RX 570 ranks 1672 out of 1744 total combos for Overpower. This places it in the bottom tier of all configurations, specifically in the 4th percentile (calculated as 1672/1744). This ranking is a direct consequence of the GPU's performance limitations, despite the CPU's strong showing.

The CPU itself is a high performer, with an average benchmark score of 49166 and a percentile ranking of 93 among all CPUs. Its nearest rival, the AMD Ryzen 9 5950X, has an average score of 49062, which is 0.2% lower. The Intel Core i5-14600KF scores 49367, a 0.4% difference. This shows the i5-14600K is a top-tier processor. However, the combo's rank in the game is dragged down by the GPU. The data shows a clear mismatch: a 93rd percentile CPU paired with a 74th percentile GPU results in a combo that ranks in the bottom 5% of all tested systems for this specific game. This demonstrates that for this title, the GPU is the sole determinant of the system's classification, and no amount of CPU headroom can compensate for the graphics card's limitations. The combination's rank is a cautionary data point about pairing a modern high-end processor with an older, lower-tier graphics card for demanding modern games.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of this combo's performance across all tested configurations.

1920x1080 (1080p):

• Low: 64.6 FPS average.
• Medium: 36.6 FPS average.
• High: 34.1 FPS average.
• Ultra: 27.5 FPS average.

At 1080p, the difference between Low and Medium settings is a significant drop of 28.0 FPS, indicating a major performance cost for the first step up in quality. The gap between Medium and High is much smaller, at only 2.5 FPS, while High to Ultra costs another 6.6 FPS.

2560x1440 (1440p):

• Low: 54.6 FPS average.
• Medium: 37.8 FPS average.
• High: 34.9 FPS average.
• Ultra: 27.5 FPS average.

The 1440p results show a similar pattern. The Low to Medium transition costs 16.8 FPS. The Medium to High drop is 2.9 FPS, and High to Ultra is 7.4 FPS. The Ultra setting at 1440p produces an identical average FPS (27.5) to the 1080p Ultra result, suggesting a hard performance floor is being hit.

3840x2160 (4K):

• Low: 47.3 FPS average.
• Medium: 31.2 FPS average.
• High: 27.2 FPS average.
• Ultra: 20.6 FPS average.

At 4K, the Low setting is the only one that approaches playability. The Medium setting drops to 31.2 FPS, High to 27.2 FPS, and Ultra falls to 20.6 FPS. The data shows that at 4K Ultra, the system is rendering at less than half the speed of its 1080p Low performance, confirming the GPU's severe limitations at this resolution.

FAQ

Q: What is the best performance this combo can achieve in Overpower?

A: The highest average FPS recorded is 64.6 FPS, which is achieved at the 1920x1080 resolution with Low settings.

Q: How does the combo perform at 4K resolution?

A: At 3840x2160, the average FPS ranges from 47.3 FPS on Low settings to 20.6 FPS on Ultra settings. The High setting yields 27.2 FPS, and Medium yields 31.2 FPS.

Q: Is the CPU or GPU the limiting factor in this system?

A: The benchmark data indicates the GPU is the clear limiting factor. The CPU ranks in the 93rd percentile of all processors, while the combo's rank is 1672 out of 1744 for this game, showing the graphics card is the primary bottleneck.

Q: What is the performance difference between Low and Ultra settings at 1080p?

A: At 1920x1080, the system achieves an average of 64.6 FPS on Low settings and 27.5 FPS on Ultra settings, a difference of 37.1 FPS.

Q: How does this combo rank against other tested configurations?

A: This combination ranks 1672 out of 1744 total tested combos for Overpower, placing it in the lower portion of the performance charts.

Q: Is the 4 GB of VRAM sufficient for this game?

A: Based on the measured FPS, the 4 GB memory configuration appears to be a limiting factor, especially at higher resolutions and quality settings. For example, the 4K Ultra setting yields only 20.6 FPS, suggesting the memory buffer is overwhelmed.