Overpower

The AMD Ryzen 7 9700F and NVIDIA GeForce RTX 5070 combination delivers a remarkably consistent 1080p and 1440p experience in Overpower, with the data showing that the GPU remains the primary bottleneck even when CPU load is high. Benchmark results indicate this pairing is well-balanced for high-refresh-rate gaming at mainstream resolutions, though 4K Ultra demands more from the graphics card than this config can comfortably provide.

Resolution Scaling

The measured FPS data reveals a clear and predictable scaling pattern as resolution increases, with the most significant performance drop occurring between 1440p and 4K. At Low settings, the average frame rate falls from 226 FPS at 1080p to 201 FPS at 1440p (an 11% reduction), and then drops further to 171 FPS at 4K (a 15% reduction from 1440p). This scaling pattern is typical for a GPU-bound scenario, where the RTX 5070's rasterization throughput becomes the limiting factor rather than the CPU.

The High preset shows a similar trajectory: 131 FPS at 1080p, 117 FPS at 1440p, and 99 FPS at 4K. The percentage drop from 1080p to 1440p is about 11%, while the drop from 1440p to 4K is roughly 15%. This consistent pattern across settings suggests that the game's engine scales resolution in a linear fashion, and the GPU's memory bandwidth and pixel rate are the primary constraints at higher resolutions.

Ultra settings exhibit the steepest scaling curve. The average FPS at 1080p is 109, which falls to 97 at 1440p (an 11% drop) and then to 82 at 4K (a 15% drop from 1440p). The fact that the relative drops are nearly identical across all presets indicates that the resolution scaling is independent of the graphics settings — the GPU is being pushed proportionally harder at each step up in resolution, regardless of whether you are running Low or Ultra.

This scaling behavior points to a system where the CPU has ample headroom at all tested resolutions. The Ryzen 7 9700F, with its 8 cores and 16 threads, is not the bottleneck here; the RTX 5070's 12 GB of GDDR7 memory and 192-bit bus width are what determine the frame rate ceiling as pixel count increases.

GPU Role

The NVIDIA GeForce RTX 5070 is built on the Blackwell 2.0 architecture and features 6144 shading units, 192 texture mapping units, and 80 raster output units. Its boost clock of 2512 MHz, combined with a 672.0 GB/s memory bandwidth from 12 GB of GDDR7 on a 192-bit bus, provides the raw throughput that drives the measured frame rates. The GPU's 30.87 TFLOPS of FP32 compute and 482.3 GTexel/s texture rate are substantial figures that explain why the card can maintain over 200 FPS at 1080p Low.

In Overpower, the GPU's role is dominant across all measured configurations. The data shows that even at 1080p Low, where the CPU would typically be more involved, the average FPS of 226 suggests the RTX 5070 is still the primary driver of performance. The gap between Low and Ultra at 1080p is 117 FPS (226 vs 109), which is a 52% reduction in frame rate — a massive swing that can only be attributed to the GPU's workload scaling with graphical fidelity.

The RTX 5070's memory configuration is particularly relevant for this game. The 12 GB capacity is sufficient for Overpower's textures at all tested settings, as evidenced by the fact that there are no stutters or anomalies in the measured data. The 672.0 GB/s bandwidth provides ample headroom for the 192-bit bus, and the GDDR7 memory clocked at 1750 MHz (28 Gbps effective) ensures that memory bandwidth does not become a limiting factor even at 4K Ultra.

Comparing to its nearest rivals in the benchmark database, the RTX 5070's average benchmark score of 40377 places it just 0.1% ahead of the AMD Radeon Pro 580 and 0.8% ahead of the AMD Radeon Pro WX 7100. It is 1.2% behind the AMD Radeon Pro 5300 and 2% ahead of the NVIDIA RTX A500 Mobile. These deltas are small, indicating that the RTX 5070 sits in a competitive performance tier, though the database's percentile rank of 82 for all GPUs suggests it is not an outlier in either direction.

CPU Role

The AMD Ryzen 7 9700F is a Zen 5 (Granite Ridge) processor with 8 cores and 16 threads, built on TSMC's 4 nm process. Its base clock of 3.80 GHz and boost clock of 5.50 GHz provide strong single-threaded performance, which is reflected in its Passmark single-thread score of 4691. The CPU's 32 MB of shared L3 cache and 89.6 GB/s dual-channel DDR5 memory bandwidth ensure that data feeding to the GPU is never starved, even at high frame rates.

In Overpower, the CPU's role is secondary but not negligible. The data shows that at 1080p Low, the average FPS of 226 is likely near the CPU's practical limit for this game, as the GPU is less taxed at this resolution and settings combination. However, the fact that the frame rate scales so smoothly across resolutions — with no signs of CPU-induced plateaus — indicates that the Ryzen 7 9700F has sufficient headroom to keep up with the RTX 5070's output.

The CPU's multithreaded performance, as measured by a Passmark multithread score of 36470, places it in the 94th percentile of all CPUs. Its nearest rivals show how tightly it sits in the performance hierarchy: it is 0.2% ahead of the AMD Ryzen 9 7940HX, 0.2% behind the Intel Core i7-14700KF, 0.7% ahead of the AMD Ryzen 9 7950X, and 0.9% ahead of the Intel Core i7-14700K. This clustering means that swapping to any of these CPUs would yield virtually identical results in Overpower, confirming that the GPU is the performance limiter in this pairing.

The CPU's 65 W TDP and 8,315 million transistors on a 70.6 mm² die are modest figures, but they do not translate to any performance deficit in this game. The boost clock of 5.50 GHz is particularly valuable for Overpower's frame pacing, as higher single-thread performance reduces the risk of frame time spikes when the game's logic threads are active.

Measured FPS Breakdown

At 1080p, the measured results show a wide performance envelope depending on settings. Low settings deliver an average of 226 FPS, which is the highest recorded for this combo. Medium settings reduce this to 141 FPS average, with a minimum of 120 FPS and a maximum of 162 FPS. High settings yield 131 FPS average, while Ultra drops to 109 FPS. The spread between Low and Ultra at 1080p is 117 FPS, representing a 52% performance hit for maximum visual quality.

Moving to 1440p, the averages are 201 FPS on Low, 126 FPS on Medium (with a 107-145 FPS range), 117 FPS on High, and 97 FPS on Ultra. The gap between Low and Ultra narrows to 104 FPS (a 52% reduction), which is proportionally similar to 1080p. The Medium preset's minimum of 107 FPS at 1440p is noteworthy — it remains above the 97 FPS average of Ultra, indicating that Medium is a viable option for maintaining high frame rates at this resolution.

At 4K, the performance becomes more demanding. Low settings still produce an average of 171 FPS, which is playable on high-refresh displays. Medium averages 107 FPS with a 91-123 FPS range, High averages 99 FPS, and Ultra drops to 82 FPS. The 4K Ultra figure of 82 FPS is the lowest average recorded for this combo, but it remains above the 60 FPS threshold for smooth gameplay, suggesting the RTX 5070 can handle 4K Ultra in Overpower if you are willing to accept a less demanding refresh rate.

The Medium settings at each resolution provide the most complete data, with both minimum and maximum FPS recorded. At 1080p, the 120-162 FPS range shows consistent frame delivery. At 1440p, the 107-145 FPS range indicates slightly more variance, and at 4K, the 91-123 FPS range shows that dips below 100 FPS are possible but not frequent.

How This Combo Ranks

The combination of the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 5070 ranks 538th out of 2980 tested combos in Overpower, placing it in the top 18% of all configurations. This is a strong result, though not exceptional, given that the GPU's percentile rank of 82 and CPU's percentile rank of 94 are both above average but not in the top tier.

The rank of 538 suggests that there are 537 other combos that achieve higher average frame rates in this game, likely featuring more powerful GPUs such as the RTX 5080 or 5090, or higher-end CPUs that can better feed them. However, the data also shows that this combo outperforms the vast majority of tested systems, putting it in a solid position for high-refresh 1080p and 1440p gaming.

The delta between the CPU's and GPU's percentile ranks (94 vs 82) indicates that the processor is relatively stronger than the graphics card when compared to all other parts in the database. This is a sensible pairing for Overpower, where the GPU is the primary bottleneck, but it also means that the CPU is somewhat underutilized at 4K Ultra where the GPU is most stressed. If you were to upgrade the GPU, the Ryzen 7 9700F would not hold back performance significantly, as its 0.2% delta against the Ryzen 9 7940HX shows it is already near the top of its class.

Settings Recommendations

For the best balance of visual quality and frame rate, the Medium preset is the clear recommendation at all three resolutions tested. At 1080p, Medium delivers an average of 141 FPS with a 120 FPS minimum, which is smooth on any high-refresh monitor and only 85 FPS less than Low. At 1440p, Medium averages 126 FPS with a 107 FPS minimum, providing a 29 FPS average advantage over High while maintaining a playable floor. At 4K, Medium averages 107 FPS with a 91 FPS minimum, which is 20 FPS faster than High and 25 FPS faster than Ultra.

If you prioritize maximum frame rates, Low settings are the way to go, but the data shows diminishing returns. At 1080p, Low's 226 FPS is overkill for most displays, and at 4K, Low's 171 FPS still exceeds the refresh rate of most monitors. The jump from Low to Medium costs roughly 38% of the frame rate at each resolution (226 to 141 at 1080p, 201 to 126 at 1440p, 171 to 107 at 4K), but the visual quality improvement is substantial.

High settings are a compromise that does not offer a clear advantage. At 1080p, High averages 131 FPS, which is only 10 FPS slower than Medium. At 1440p, High averages 117 FPS, which is 9 FPS slower than Medium. At 4K, High averages 99 FPS, which is 8 FPS slower than Medium. The performance penalty for High versus Medium is modest, but if you are seeking the best experience, the data suggests Medium provides the highest frame rate floor while still offering enhanced visuals over Low.

Ultra settings are only recommended for 4K gaming on a 60 Hz display, where the 82 FPS average is sufficient. At 1080p and 1440p, Ultra's 109 FPS and 97 FPS averages, respectively, are playable but do not justify the significant drop from Medium, especially when considering that the minimum FPS at Ultra is not recorded and likely dips below the averages shown.

The measured data supports a straightforward conclusion: enable Medium settings for the best experience across all resolutions. This preset delivers the most consistent frame delivery, as evidenced by the recorded minimums of 120, 107, and 91 FPS at 1080p, 1440p, and 4K, respectively. These minimums are all above the 60 FPS threshold for smooth gameplay, and the average FPS at Medium are only 15-20% below Low while offering far better visual fidelity.