Doom

The AMD Ryzen 7 7800X3D paired with the NVIDIA GeForce RTX 5060 produces a highly capable system for Doom, with benchmark results showing a clear scaling pattern driven by both the GPU's memory configuration and the CPU's cache architecture. The RTX 5060 features 8 GB of GDDR7 memory on a 128-bit bus, delivering 448.0 GB/s of bandwidth, which proves sufficient for the game's demands at the tested settings. The GPU's base clock of 2280 MHz and boost clock of 2497 MHz, combined with its 3840 shading units, provide the raw throughput needed for the id Tech engine's rendering workload. At 3840x2160, the system averages 59.3 FPS on High settings, indicating that the GPU is the limiting factor at this resolution, as the frame rate drops to 49.7 FPS on Ultra, a 16% reduction from High, while Low settings yield 85 FPS, a 43% improvement over Ultra.

GPU Role — VRAM, clocks, and how they relate to this game's results

The RTX 5060's memory subsystem is a critical component in Doom's performance profile. With 8 GB of GDDR7 VRAM and a 128-bit bus, the card achieves 448.0 GB/s of bandwidth. This configuration allows the GPU to handle the game's texture streaming and geometry data without significant bottlenecks at 1920x1080 and 2560x1440, where the average frame rates remain high across all presets. However, at 3840x2160, the higher pixel count and increased texture memory pressure start to strain the 8 GB capacity, as evidenced by the frame rate gap between High (59.3 FPS) and Ultra (49.7 FPS). The Ultra preset likely increases texture resolution and shadow quality, which consumes additional VRAM, causing the GPU to rely on slower memory paging. The clock speeds play a role here as well: the boost clock of 2497 MHz is the ceiling for the GPU's shader units, and at 4K Ultra, the card is likely hitting that limit while also managing memory bandwidth constraints.

Benchmark data shows the GPU's overall standing relative to its peers. The RTX 5060 scores 20891 in the Passmark G3D test and 120785 in Geekbench OpenCL, placing it in the 73rd percentile of all GPUs. Its nearest rival, the AMD Radeon RX 7700 XT, has an average benchmark score of 30097, which is essentially identical to the RTX 5060's 30109, with a deltaPct of 0. This near parity in synthetic benchmarks suggests that in Doom, the RTX 5060's performance is competitive with that card, though the game's optimization for NVIDIA hardware may tilt results in favor of the RTX 5060. In contrast, the NVIDIA Tesla M60 and RTX 5070 Mobile are within 0.5% and 0.6% of the RTX 5060's average score, respectively, indicating a tight cluster of performance around this GPU tier. The measured frame rates in Doom reflect this: at 1920x1080 High, the system hits 179.1 FPS, which is more than sufficient for smooth gameplay on high-refresh-rate monitors, and even at 2560x1440 High, it maintains 117.1 FPS, showing the GPU can handle the game's demands without requiring lower settings.

Settings Recommendations — which preset gives the best experience per the measured rows

The measured FPS data provides a clear hierarchy of settings across three resolutions. At 1920x1080, the Low preset delivers 242 FPS, Medium 208.7 FPS, High 179.1 FPS, and Ultra 147.4 FPS. The jump from Low to Medium costs 33.3 FPS (14%), but the visual improvements from Medium to High are typically more noticeable, with only a 29.6 FPS drop (14%). Moving from High to Ultra sacrifices 31.7 FPS (18%) for marginal gains in shadow fidelity and draw distance. For competitive play or high-refresh-rate displays, the High preset at 1080p offers the best balance, as it remains above 170 FPS while providing substantial visual quality over Medium. At 2560x1440, the scaling is similar: Low hits 157.3 FPS, Medium 134.3 FPS, High 117.1 FPS, and Ultra 92.5 FPS. The High preset here is the recommended choice for most users, as it stays above 100 FPS and the drop to Ultra (24.6 FPS, 21%) is not justified by the modest visual enhancements in Doom's fast-paced gameplay. At 3840x2160, the situation changes dramatically. Low produces 85 FPS, Medium 73.5 FPS, High 59.3 FPS, and Ultra 49.7 FPS. For 4K gaming, the Medium preset is the optimal choice, as it delivers 73.5 FPS, which is above the 60 FPS threshold for smooth play, while High dips below that at 59.3 FPS, and Ultra falls well short at 49.7 FPS. The Medium preset at 4K provides a playable experience without the stutter that can occur below 60 FPS, making it the best compromise between visual fidelity and frame rate.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 7800X3D contributes significantly to Doom's performance, particularly in maintaining high frame rates at lower resolutions where the GPU is not the bottleneck. This CPU features 8 cores and 16 threads, with a base clock of 4.20 GHz and a boost clock of 5.00 GHz. Its most notable attribute is the 96 MB of shared L3 cache, which is a hallmark of the 3D V-Cache design. Doom's engine benefits from large caches because it frequently accesses game state data and geometry information, and the 96 MB L3 allows more of this data to be stored on-die, reducing memory latency. The CPU's benchmark scores support this: it achieves a Cinebench R23 multicore score of 29149 and a single-core score of 4115, with a Geekbench multicore score of 15101 and single-core of 2725. These figures place the CPU in the 87th percentile of all CPUs, with an average benchmark score of 31580. Its nearest rival, the Intel Core i7-12700F, scores 31543, a deltaPct of 0.1%, indicating near-identical overall performance, but the 7800X3D's cache advantage can show up in gaming workloads like Doom.

The CPU's clock speeds are modest compared to some competitors, but the cache compensates. At 1920x1080 Low, the system reaches 242 FPS, which is a scenario where the CPU must feed frames to the GPU as fast as possible. The 7800X3D's boost clock of 5.00 GHz ensures that single-threaded game logic runs efficiently, while the 16 threads handle background tasks. The Passmark single-thread score of 3759 and the 3DMark single-thread score of 959 indicate strong per-core performance, which is crucial for Doom's main thread. At 2560x1440, the CPU still holds up, as the frame rates remain high (157.3 FPS on Low), and even at 3840x2160, the CPU is not the limiting factor, as the GPU's workload dominates. The CPU's memory bandwidth of 83.2 GB/s over a dual-channel DDR5 bus is adequate for feeding the 8-core processor, though the L3 cache reduces the frequency of memory accesses. Overall, the CPU's role is to ensure that the GPU is never starved of data, and the benchmark results confirm that the 7800X3D performs this role effectively across all tested settings.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the average frame rate at 2560x1440 with Ultra settings?

A: The system achieves an average of 92.5 FPS at 2560x1440 with the Ultra preset, which is 24.6 FPS lower than the High preset at the same resolution, indicating that Ultra's additional effects significantly impact performance.

Q: How does the RTX 5060 compare to its closest rival in synthetic benchmarks?

A: The RTX 5060 has an average benchmark score of 30109, while the AMD Radeon RX 7700 XT scores 30097, resulting in a deltaPct of 0, meaning they perform virtually identically in aggregate benchmarks. The NVIDIA Tesla M60 and RTX 5070 Mobile are slightly behind at 29969 and 29928, respectively.

Q: What is the CPU's L3 cache size and how does it affect Doom?

A: The Ryzen 7 7800X3D has 96 MB of shared L3 cache, which is a large amount for a desktop processor. This cache helps Doom by storing frequently accessed game data on-die, reducing memory latency and allowing the CPU to maintain high frame rates, particularly at lower resolutions like 1920x1080.

Q: Which preset at 3840x2160 provides the best playable experience?

A: The Medium preset at 3840x2160 yields 73.5 FPS, which is above the 60 FPS threshold for smooth gameplay. The High preset drops to 59.3 FPS, and Ultra falls to 49.7 FPS, making Medium the recommended choice for 4K gaming with this hardware.

Q: What is the CPU's boost clock and single-thread score?

A: The Ryzen 7 7800X3D has a boost clock of 5.00 GHz and a Passmark single-thread score of 3759. This level of single-thread performance is sufficient to handle Doom's main game logic without bottlenecking the GPU at any tested resolution.

Q: How does the combo rank among all tested combinations in this game?

A: This system ranks 837th out of 1681 tested combos for Doom, placing it in the top half of all configurations. The rank reflects the balance between the CPU's 87th percentile standing and the GPU's 73rd percentile, resulting in a mid-tier position for overall gaming performance.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 5060 ranks 837th out of 1681 tested combos for Doom, which places it in the 50th percentile of all configurations tested. This ranking is a function of both components' individual standings: the CPU is in the 87th percentile of all CPUs, while the GPU is in the 73rd percentile of all GPUs. The CPU's high percentile does not fully compensate for the GPU's mid-tier position, as Doom is a GPU-intensive game at higher resolutions. However, the rank of 837 out of 1681 indicates that this combo outperforms half of the tested systems, which is a respectable result given the RTX 5060's position in the GPU hierarchy. The data suggests that the combo is well-suited for 1080p and 1440p gaming, where the CPU's cache and the GPU's bandwidth combine to produce high frame rates, but it is less competitive at 4K Ultra settings, where the GPU's 8 GB VRAM and 128-bit bus become limiting factors.

The nearestRivals data for the CPU shows that the 7800X3D is within 0.6% of the AMD Ryzen 7 8700G and Ryzen 7 7745HX, which means that swapping to those CPUs would have a negligible impact on the combo's rank. Similarly, the GPU's nearest rivals, including the RX 7700 XT and RTX 5070 Mobile, have deltaPct values of 0.6% or less, indicating that the combo's performance is tightly clustered with other mid-range configurations. The rank of 837 out of 1681 is therefore not a reflection of a weak pairing, but rather of a balanced system that sits in the middle of the performance curve. For users targeting high-refresh-rate 1080p or solid 1440p gameplay, this combo delivers excellent results, as evidenced by the 179.1 FPS at 1080p High and 117.1 FPS at 1440p High. The benchmark data confirms that the combo's ranking is appropriate for its hardware tier, with no significant bottlenecks in most scenarios.