Overpower

Overpower

AVERAGE FPS
119
good

This combination provides smooth gameplay with an average of 119 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 72 87 95 151
1440p QHD 88 102 113 177
1080p Full HD 95 119 127 198

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 151
3840x2160 Medium 95
3840x2160 High 87
3840x2160 Ultra 72
2560x1440 Low 177
2560x1440 Medium 113
2560x1440 High 102
2560x1440 Ultra 88
1920x1080 Low 198
1920x1080 Medium 127
1920x1080 High 119
1920x1080 Ultra 95

Overpower with AMD Ryzen 7 5800XT + AMD Radeon RX 9070, In-Depth Analysis

The AMD Ryzen 7 5800XT paired with the AMD Radeon RX 9070 presents a compelling dataset for Overpower, showing how a high-end 5000-series CPU and a modern RDNA 4.0 GPU interact across a full matrix of resolutions and settings. The measured frames per second reveal a system that scales predictably, with the GPU taking the lead role as pixel count rises and the CPU proving sufficient at lower resolutions.

Resolution Scaling

The transition from 1920x1080 to 3840x2160 is where the RX 9070 begins to demonstrate its workload. At Ultra settings, the average frame rate drops from 94.7 FPS at 1080p to 72.2 FPS at 4K, a reduction of roughly 24%. This is a moderate decline, indicating that the GPU is still managing the higher pixel count without a catastrophic collapse in performance. The move from 1080p to 1440p at Ultra shows a smaller step, from 94.7 to 87.7 FPS, suggesting the card has ample headroom in the mid-range resolution.

The scaling pattern shifts dramatically when settings are lowered. At Low settings, the 1080p result is 197.7 FPS, which falls to 176.9 FPS at 1440p and then to 151 FPS at 4K. The 4K Low figure is still remarkably high, showing that the RX 9070 can push past 150 frames per second even with the resolution maxed out, as long as graphical effects are stripped back. The gap between 1080p and 4K at Low settings is about 24%, similar to the Ultra percentage, but the absolute values are much higher, meaning the limiting factor shifts from raw pixel throughput to other bottlenecks as settings decrease.

What this data suggests is that the limiting component changes based on the preset. At High, Medium, and Ultra, the GPU is clearly the primary constraint, as frame rates scale closely with resolution. However, at Low settings, the relatively smaller drop from 1080p to 4K (197.7 to 151 FPS) hints that the CPU is beginning to exert influence, preventing the GPU from fully stretching its legs at lower resolutions. The 5800XT, with its 8 cores and 16 threads, appears to be keeping up well, but the data implies that at 1080p Low, the system is closer to a CPU-bound scenario, where the graphics card is waiting on the processor to feed it instructions.

GPU Role

The AMD Radeon RX 9070 is built on the RDNA 4.0 architecture, specifically the Navi 48 chip, manufactured on a 4 nm process by TSMC. It carries 16 GB of GDDR6 memory on a 256-bit bus, yielding a bandwidth of 644.6 GB/s. The memory clock is listed at 2518 MHz, with an effective data rate of 20.1 Gbps. These specifications are substantial for a modern action game, and the benchmark results reflect that capacity.

In Overpower, the GPU's role is dominant at higher quality presets. The jump from Medium to Ultra at 4K illustrates this: 94.8 FPS at Medium versus 72.2 FPS at Ultra. This 30% performance cost for the highest preset shows the heavy shading and texture loads that the RDNA 4.0 architecture must process. The boost clock of 2520 MHz and game clock of 2070 MHz allow the card to sustain high throughput, but the Ultra preset demands more from the 3584 shading units and 128 ROPs.

The VRAM capacity of 16 GB appears sufficient for this title, even at 4K Ultra, where the average frame rate of 72.2 FPS remains playable. There is no indication in the data of memory capacity limiting performance, as the scaling from 1440p to 4K at Ultra (87.7 to 72.2 FPS) is consistent with a compute-bound workload rather than a memory bandwidth shortage. The GPU's 220 W TDP and dual-slot cooler suggest a power delivery system capable of sustaining these clock speeds under load, and the benchmark results confirm that the card does not throttle to a degree that would cause frame rate anomalies.

The GPU's percentile ranking against all GPUs is 79, and its average benchmark score is 34780. Its nearest rival, the NVIDIA A2, scores 34866, a delta of -0.2%, meaning the RX 9070 is essentially on par with that professional-grade card in synthetic tests. In this game, however, the measured data shows the RX 9070 delivering strong real-world performance, which is the more relevant metric for this analysis.

CPU Role

The AMD Ryzen 7 5800XT is a Zen 3 part from the 5000 series, running on the AMD Socket AM4 platform. It has 8 cores and 16 threads, with a base clock of 3.80 GHz and a boost clock of 4.80 GHz. The 32 MB of L3 cache is a key asset for gaming, providing fast access to frequently used data. The CPU's TDP of 105 W is modest, and it supports DDR4 memory with a dual-channel bus, yielding a bandwidth of 51.2 GB/s.

The CPU's role in Overpower becomes more apparent when examining the Low settings results. At 1080p Low, the system hits 197.7 FPS, but at 4K Low it reaches 151 FPS. While the GPU is still the dominant factor, the CPU's performance ceiling is visible in the 1080p data. The Ryzen 7 5800XT's multi-threaded capabilities, evidenced by its 3dmark_max_threads score of 7680 and cinebench_r23_multicore score of 23794, ensure that it can feed the GPU effectively. The single-thread score of 959 in 3dmark_single_thread is equally important, as game logic and draw calls often rely on single-core performance.

Comparing the CPU to its nearest rivals shows a tight grouping. The AMD Ryzen 7 PRO 5755GE has an average score of 29740, a delta of 0.1% from the 5800XT's 29774. The AMD Ryzen 7 6800HS scores 29856, a delta of -0.3%. These differences are negligible, indicating that the 5800XT is performing exactly as expected for its class. The CPU's percentile ranking of 86 against all CPUs confirms it is a strong performer, and in this game, the data shows that it does not bottleneck the RX 9070 at standard gaming resolutions, though the 1080p Low result suggests it is approaching its limits in lighter workloads.

How This Combo Ranks

In the composite ranking for Overpower, this combination of the Ryzen 7 5800XT and the RX 9070 holds the 553rd position out of 1744 tested combos. This places it in the top third of all configurations, a solid result for a pairing of a 2024 CPU with a 2025 GPU. The rank reflects the balance between the two components; the CPU is not holding back the GPU to a significant degree, and the GPU is capable of producing high frame rates.

The ranking implies that there are many combos with newer, more expensive CPUs or GPUs that outperform this setup, but also a substantial number that fall behind. The combo's position is likely buoyed by the RX 9070's strong 4K performance, which allows it to leapfrog systems with weaker graphics cards but similar CPUs. The data shows that this is a well-matched pairing for high-refresh-rate 1440p gaming and smooth 4K at High settings, where the average frame rates are 102 and 86.8 FPS, respectively.

Measured FPS Breakdown

The full set of measured frames per second provides a complete picture of the system's behavior.

At 1920x1080, the lowest resolution tested, the system delivers 197.7 FPS on Low settings. This drops to 126.8 FPS on Medium, 118.5 FPS on High, and 94.7 FPS on Ultra. The step from Low to Medium is the largest, a 36% reduction, which suggests that the Medium preset introduces significant effects that tax the GPU. The difference between High and Ultra is only about 20%, indicating a more gradual scaling in the upper range of settings.

Moving to 2560x1440, the frame rates are 176.9 FPS on Low, 113 FPS on Medium, 102 FPS on High, and 87.7 FPS on Ultra. The drop from Low to Medium is 36% again, showing a consistent pattern across resolutions. The 1440p results are notably high, with even the Ultra preset staying above 85 FPS, making this the sweet spot for the combo if a high refresh rate monitor is in use.

At 3840x2160, the 4K results are 151 FPS on Low, 94.8 FPS on Medium, 86.8 FPS on High, and 72.2 FPS on Ultra. The Low setting remains exceptionally high, but Ultra dips below 75 FPS. For a game like Overpower, an action title, the 72.2 FPS average at 4K Ultra is still smooth, but the data shows that players seeking 100+ FPS at 4K will need to use High settings or lower. The consistency of the scaling across all three resolutions confirms that the GPU is the primary driver of performance, with the CPU maintaining a stable platform for the RX 9070 to operate at its full potential.

Hardware Specifications

AMD Ryzen 7 5800XT

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 4800 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 9070

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2520 MHz MHz
TDP 220 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5800XT + AMD Radeon RX 9070 in Overpower

Resolution Settings Avg FPS
3840x2160 Low 151.0
3840x2160 Medium 94.8
3840x2160 High 86.8
3840x2160 Ultra 72.2
2560x1440 Low 176.9
2560x1440 Medium 113.0
2560x1440 High 102.0
2560x1440 Ultra 87.7
1920x1080 Low 197.7
1920x1080 Medium 126.8
1920x1080 High 118.5
1920x1080 Ultra 94.7

Overpower with Ryzen 7 5800XT + Other GPUs

See how Overpower performs with the same CPU but different graphics cards.

Overpower with RX 9070 + Other CPUs

See how Overpower performs with the same GPU but different processors.

Other Games with Ryzen 7 5800XT + RX 9070

Explore FPS benchmarks for other games using this same hardware combination.