Overpower

The AMD Ryzen 7 5700 paired with the NVIDIA GeForce RTX 4090 delivers an exceptional 4K gaming experience in Overpower, but the benchmark data reveals a system where the GPU is the clear performance ceiling. This combination ranks in the top percentile of all tested pairings, yet the CPU’s influence becomes visible at lower resolutions, where the frame rate scaling flattens out. The following analysis breaks down the measured performance across resolutions and settings, contextualizing the data against the component specifications and rival scores.

Resolution Scaling

The frame rate progression from 1080p to 4K clearly identifies the RTX 4090 as the limiting component, with the CPU’s role diminishing as pixel count increases. At Low settings, the average frame rate drops from 217.6 FPS at 1920x1080 to 208.0 FPS at 2560x1440, a modest 4.4% reduction. Moving to 3840x2160 yields 198.3 FPS, which is only 8.9% lower than the 1080p result. This relatively small performance penalty across a 4x increase in pixel count indicates that the CPU is still delivering enough throughput to feed the GPU, but the GPU is beginning to stretch its legs.

The scaling pattern shifts dramatically with higher graphics presets. At Ultra settings, the 1080p result of 143.5 FPS drops to 129.8 FPS at 1440p (a 9.5% decrease) and then falls further to 109.0 FPS at 4K, representing a 24% total reduction from 1080p. This steeper decline at Ultra suggests that the additional shading and texture work is placing a proportionally larger load on the GPU, which is expected given the RTX 4090’s raw compute capabilities. The gap between Low and Ultra at 4K is 89.3 FPS, whereas at 1080p that same gap is 74.1 FPS, showing that higher resolutions amplify the impact of graphics settings on overall throughput.

The data indicates that at 1080p, the system is partially CPU-bound, particularly at lower settings where the 217.6 FPS ceiling suggests the processor’s 16 threads are nearing their limit. The Ryzen 7 5700’s 3DMark max-thread score of 6617 and Cinebench R23 multi-core score of 20655 support this interpretation, as the CPU can only generate so many frames per second regardless of GPU headroom. However, at 4K, the GPU becomes the dominant constraint, as evidenced by the fact that even the Low preset’s 198.3 FPS is only 16 FPS higher than the Ultra preset’s 109.0 FPS, indicating the GPU is working at full capacity across all settings.

How This Combo Ranks

This specific combination of CPU and GPU achieves a rank of 80 out of 1,744 tested combos in Overpower, placing it in the top 4.6% of all pairings in the database. This is a strong result, though not the absolute top tier, which suggests that while the RTX 4090 is among the most powerful GPUs available, the Ryzen 7 5700 holds the combo back from the very highest rankings. The CPU’s percentile vs. all processors is 84, while the GPU’s percentile vs. all GPUs is 91, creating a slight imbalance where the GPU outperforms the CPU in relative standing.

The CPU’s nearest rivals provide context for its position. The Intel Core i9-9900K scores 27,043 (0.7% higher), the Intel Core i7-12700H scores 27,006 (0.8% higher), the Intel Core i7-1370P scores 26,991 (0.8% higher), and the AMD Ryzen AI 5 340 scores 26,909 (1.2% higher). These differences are minimal, meaning the Ryzen 7 5700 is essentially performance-equivalent to these processors in synthetic benchmarks. However, in a gaming scenario like Overpower, the 8-core/16-thread configuration with a 4.60 GHz boost clock appears sufficient to avoid severe bottlenecks, as evidenced by the combo’s high rank.

The GPU’s rivals tell a different story. The NVIDIA Tesla T4 scores 66,733 (0.4% lower), the Tesla P40 scores 66,127 (0.5% higher), the AMD Radeon Pro Vega 56 scores 67,097 (0.9% lower), and the NVIDIA Quadro P6000 scores 67,320 (1.3% lower). These are professional-grade cards, not gaming-focused hardware, yet the RTX 4090’s 66,473 average benchmark score places it squarely among them. This is notable because the RTX 4090 is designed for gaming, and its performance in Overpower reflects its 82.58 TFLOPS FP32 throughput and 24 GB of GDDR6X memory working in tandem.

GPU Role

The RTX 4090’s specifications directly explain its dominance in this game. With 16,384 shading units, 512 texture mapping units, and 176 raster output units, the GPU has the raw resources to process Overpower’s action-oriented visuals at high frame rates. The boost clock of 2520 MHz, combined with a base clock of 2235 MHz, provides the frequency headroom necessary to maintain consistent performance across varying scene complexity. The memory subsystem, featuring 24 GB of GDDR6X on a 384-bit bus, yields 1.01 TB/s of bandwidth, which is critical for feeding the GPU’s immense compute capability at 4K resolution.

The VRAM capacity is particularly relevant for Overpower. The game’s High preset at 4K averages 134.7 FPS, while the Ultra preset drops to 109.0 FPS. This 25.7 FPS difference is likely due to higher-resolution textures and more complex shading effects that demand additional memory bandwidth and capacity. With 24 GB of VRAM, the RTX 4090 has ample headroom to handle even the most demanding texture packs without spilling into system memory, which would otherwise cause severe frame drops. The GPU’s PassMark G3D score of 38,194 and 3DMark Steel Nomad DX12 score of 9,223 further substantiate its gaming prowess.

The GPU’s memory clock of 1313 MHz (21 Gbps effective) and 1.01 TB/s bandwidth are adequate for the frame rates observed. At 4K Low settings, the 198.3 FPS average suggests the GPU is not memory-bandwidth-limited, as even the most demanding settings only reduce performance to 109.0 FPS. The FP32 throughput of 82.58 TFLOPS is more than sufficient for the game’s geometry and pixel processing requirements, meaning the GPU is rarely the bottleneck in this pairing.

Settings Recommendations

Based on the measured frame rates, the High preset at 2560x1440 provides the most balanced experience, delivering 156.1 FPS while maintaining visual fidelity. This is 26.3 FPS higher than the Ultra preset at the same resolution (129.8 FPS), yet the visual difference between High and Ultra in Overpower is typically less pronounced than the performance gap. For 4K displays, the High preset at 134.7 FPS is the pragmatic choice, as it exceeds the 120 Hz refresh rate common on high-end monitors while preserving most of the graphical enhancements.

The Ultra preset is only advisable for users with 4K displays that support 120 Hz or higher, as the 109.0 FPS average at 3840x2160 remains playable but does not fully utilize the RTX 4090’s capabilities. Conversely, the Low preset at 1920x1080 (217.6 FPS) is unnecessary for competitive play, as the 143.5 FPS Ultra result already provides a smooth experience. The Medium preset at 1440p (167.2 FPS) offers a compromise, but the data shows that High provides a 11 FPS improvement over Medium at the same resolution, making High the superior choice for both quality and performance.

The frame rate deltas between settings are consistent across resolutions, with Ultra being 9.5% slower than High at 1080p and 19.1% slower at 4K. This suggests that the Ultra preset’s additional effects (likely including ray tracing or advanced post-processing) scale with resolution, making High the recommended setting for most users. The Ryzen 7 5700’s 16 threads are sufficient to maintain these frame rates, as the CPU’s 3DMark 16-thread score of 6,628 indicates it can keep up with the GPU’s output.

Measured FPS Breakdown

At 1920x1080, the system achieves its highest frame rates across all settings. Low settings produce 217.6 FPS, Medium 181.0 FPS, High 171.8 FPS, and Ultra 143.5 FPS. The delta between Low and Ultra is 74.1 FPS, representing a 34% reduction in performance for maximum visual quality. Notably, the gap between Medium and High is only 9.2 FPS, while the gap between High and Ultra is 28.3 FPS, indicating that the Ultra preset imposes a disproportionately heavy load.

The 2560x1440 results show similar trends with slightly lower absolute numbers. Low averages 208.0 FPS, Medium 167.2 FPS, High 156.1 FPS, and Ultra 129.8 FPS. The difference between Low and Ultra is 78.2 FPS, which is proportionally similar to the 1080p results. The 4K resolution (3840x2160) yields the most constrained performance: Low 198.3 FPS, Medium 144.4 FPS, High 134.7 FPS, and Ultra 109.0 FPS. The Ultra-to-Low gap here is 89.3 FPS, the largest of any resolution, highlighting how resolution scaling amplifies the cost of higher settings.

The data reveals that the RTX 4090 maintains exceptional performance even at 4K, with the lowest recorded average being 109.0 FPS at Ultra settings. This reflects the GPU’s 443.5 GPixel/s pixel rate and 1,290.2 GTexel/s texture rate. The CPU’s contribution is most visible at 1080p Low, where the 217.6 FPS ceiling is likely near the processor’s maximum frame generation capability. Across all 12 measured configurations, the system never drops below 100 FPS, making this combo one of the most capable tested for Overpower in terms of raw frame rate delivery.