Overpower

GPU Role — VRAM, clocks, and how they relate to this game's results

The Intel Arc B570 is the primary rendering engine in this combo, and its specifications directly shape the frame rates observed in Overpower. The GPU packs 10 GB of GDDR6 memory on a 160-bit bus, delivering 380.0 GB/s of bandwidth. That memory configuration proves adequate for the game’s demands at 1080p and 1440p, where the card sustains playable averages across all settings. At 4K Ultra, the 10 GB frame buffer and 380.0 GB/s bandwidth become limiting factors, as the average FPS drops to 40.

Clock behavior is straightforward: the B570 runs at a flat 2500 MHz base and boost, with memory at 2375 MHz (19 Gbps effective). There is no clock variance to discuss — the card holds a constant 2500 MHz across the board. The GPU’s compute resources include 2304 shading units, 144 TMUs, and 80 ROPs, with 18 RT cores for ray-traced workloads. Peak theoretical performance is 11.52 TFLOPS FP32 and 23.04 TFLOPS FP16 (2:1 ratio). The pixel rate of 200.0 GPixel/s and texture rate of 360.0 GTexel/s indicate a design balanced for 1440p-class gaming rather than 4K dominance.

In Overpower specifically, the B570’s 80 ROPs and 200.0 GPixel/s pixel throughput are the bottleneck at 4K. The measured data shows 4K High averaging 49 FPS, while 4K Low reaches 84 FPS — a clear sign that pixel fill and memory bandwidth, not shader throughput, constrain high-resolution performance. At 1080p, the GPU has more headroom: 110 FPS on Low and 64 FPS on High. The gap between Low and Ultra at each resolution narrows as resolution drops, confirming that the B570’s fixed-function units (ROPs, TMUs) are the limiting factor at higher pixel counts.

The GPU’s overall standing is modest: it ranks in the 65th percentile among all GPUs, with an average benchmark score of 20556. Its nearest rivals in aggregate benchmarks are the NVIDIA GeForce RTX 3070 Mobile (deltaPct 0.1), Intel Arc A750 (deltaPct -0.1), NVIDIA Quadro M4000M (deltaPct 0.4), and AMD Radeon R9 M390X (deltaPct -0.5). The B570 essentially trades blows with the RTX 3070 Mobile and Arc A750 in synthetic tests, though Overpower’s real-world frame rates tell a more nuanced story — the card’s 10 GB VRAM and 160-bit bus are sufficient for 1080p and 1440p but insufficient for consistent 4K Ultra play.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data for this combo covers three resolutions (1080p, 1440p, 4K) and four settings tiers (Low, Medium, High, Ultra). All figures are measured, not estimated. The pattern is consistent: Low settings deliver the highest frame rates, Ultra the lowest, with Medium and High falling in between.

1080p (1920x1080): The best-case scenario is Low settings at 110 FPS average. Medium settings drop to 69 FPS average, with a minimum of 59 and maximum of 79. High settings yield 64 FPS average. Ultra settings bottom out at 53 FPS average. The spread from Low to Ultra is 57 FPS — a substantial range that indicates the game’s settings have a large impact on GPU load at this resolution.

1440p (2560x1440): Low settings average 98 FPS. Medium settings average 62 FPS, with a minimum of 52 and maximum of 71. High settings average 57 FPS. Ultra settings average 47 FPS. The Low-to-Ultra spread here is 51 FPS, slightly narrower than at 1080p, which suggests the GPU is becoming more uniformly stressed as pixel count rises.

4K (3840x2160): Low settings average 84 FPS. Medium settings average 52 FPS, with a minimum of 44 and maximum of 60. High settings average 49 FPS. Ultra settings average 40 FPS. The Low-to-Ultra spread narrows further to 44 FPS. Notably, the 4K Low result (84 FPS) is closer to the 1440p High result (57 FPS) than to 1080p Low (110 FPS), indicating that pixel throughput begins to dominate.

The Medium settings tier is the only one with reported minimum and maximum FPS values. At 1080p Medium, the range is 59-79 FPS (average 69). At 1440p Medium, 52-71 FPS (average 62). At 4K Medium, 44-60 FPS (average 52). These ranges show a consistent ~20 FPS swing at every resolution, suggesting the game’s frame pacing is stable regardless of resolution.

A key observation: the average FPS at 4K Ultra (40) is below the 1080p Ultra figure (53) by 13 FPS, but the absolute drop from 1080p Low (110) to 4K Low (84) is 26 FPS. The game is playable at 1080p across all settings, and at 1440p Low/Medium, but 4K Ultra at 40 FPS is borderline for action gameplay.

How This Combo Ranks — use comboRankInGame vs other tested combos

The AMD Ryzen 5 9600X + Intel Arc B570 combination ranks 2373 out of 2980 tested combos in Overpower. That places it in the 20th percentile of all tested combinations — meaning roughly 80% of tested combos produce higher frame rates in this game. This is a below-average result for the combo, driven primarily by the GPU’s mid-tier position rather than any CPU deficiency.

To contextualize: the GPU alone sits in the 65th percentile among all GPUs, while the CPU sits in the 81st percentile among all CPUs. The combo’s rank (20th percentile) is substantially lower than either component’s individual percentile. This discrepancy suggests that Overpower is heavily GPU-bound in this configuration, and the CPU’s strong single-thread performance (1253 in 3dmark single-thread, 2183.5 in Cinebench R23 single-core) cannot compensate for the B570’s limitations at higher settings.

The combo’s rank of 2373 out of 2980 means 607 tested combos perform worse. That’s not a catastrophic result, but it is a clear signal that this pairing is optimized for 1080p gaming rather than high-refresh 1440p or 4K. The measured FPS data supports this: at 1080p Low, the combo hits 110 FPS, which would be competitive for esports-style play, but at 4K Ultra it falls to 40 FPS, which is sub-30th-percentile territory.

When comparing to other combos, the data indicates that any pairing with a stronger GPU would likely rank significantly higher, since the CPU is not the bottleneck in most scenarios. The B570’s nearest GPU rivals (RTX 3070 Mobile, Arc A750) would produce similar or slightly better frame rates in Overpower, given their nearly identical aggregate scores (deltaPct within 0.5%). The combo’s rank is therefore more a reflection of the GPU tier than the CPU choice.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

Resolution scaling reveals the bottleneck structure of this combo. From 1080p to 1440p, the average FPS drops by roughly 10-13% across settings: Low drops from 110 to 98 (10.9% decrease), Medium from 69 to 62 (10.1%), High from 64 to 57 (10.9%), and Ultra from 53 to 47 (11.3%). This uniform ~10% drop across all settings indicates that the GPU is the limiting factor — a CPU-bound scenario would show larger drops at lower settings where frame rates are higher.

From 1440p to 4K, the drops become more pronounced: Low drops from 98 to 84 (14.3%), Medium from 62 to 52 (16.1%), High from 57 to 49 (14.0%), and Ultra from 47 to 40 (14.9%). The steeper decline at 4K confirms that the B570’s ROP throughput and memory bandwidth are increasingly saturated. The 380.0 GB/s bandwidth and 200.0 GPixel/s pixel rate are simply not sufficient for 4K at high settings, as evidenced by the 4K Ultra average of 40 FPS.

The cumulative drop from 1080p Low (110 FPS) to 4K Low (84 FPS) is 23.6%. From 1080p Ultra (53 FPS) to 4K Ultra (40 FPS), the drop is 24.5%. These percentages are remarkably consistent, which suggests the game’s rendering pipeline scales linearly with pixel count — there are no sudden cliff effects or memory-related stutters. The minimum FPS at 4K Medium (44) is close to the average at 4K Ultra (40), indicating that frame time variance increases at higher resolutions.

The data points to the GPU as the clear limiting component. If the CPU were the bottleneck, we would expect to see smaller FPS differences between 1080p and 1440p at Low settings (where the CPU has more work per frame relative to the GPU). Instead, the nearly identical percentage drops across all settings tiers indicate a purely GPU-bound scenario. The Ryzen 5 9600X’s 6 cores and 12 threads, boosting to 5.40 GHz, are more than capable of feeding the B570 at these frame rates.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 9600X is a 6-core, 12-thread processor based on the Zen 5 architecture (Granite Ridge codename), built on TSMC’s 4 nm process. It has a base clock of 3.90 GHz and a boost clock of 5.40 GHz, with a 65 W TDP. The CPU features 80 KB L1 cache per core, 1 MB L2 per core, and 32 MB shared L3 cache. It supports dual-channel DDR5 memory with 89.6 GB/s bandwidth and runs on the AMD Socket AM5 platform with PCIe Gen 5 (24 lanes).

In Overpower, the CPU’s role is secondary to the GPU, but its strong single-thread performance ensures it doesn’t hold back the B570 at any resolution. The 9600X scores 1253 in 3dmark single-thread and 2183.5 in Cinebench R23 single-core, placing it in the 81st percentile among all CPUs. Its multi-thread scores are also solid: 7590 in 3dmark max threads, 17528.5 in Cinebench R23 multicore, and 14438 in Geekbench multicore.

The CPU’s nearest rivals in aggregate benchmarks are the AMD Ryzen 7 PRO 5755GE (deltaPct 0.2), AMD Ryzen 7 7840H (deltaPct -0.5), AMD Ryzen 7 5800XT (deltaPct -0.6), and AMD Ryzen 7 8845HS (deltaPct -0.8). All are within 1% of the 9600X’s average benchmark score of 29713, indicating that the 9600X is competitively positioned in its class. The 0.2% lead over the Ryzen 7 PRO 5755GE is negligible in real-world gaming.

For Overpower specifically, the 9600X’s 5.40 GHz boost clock and 32 MB L3 cache are the key assets. The game’s frame rates at 1080p Low (110 FPS) suggest that the CPU can sustain high instruction throughput without bottlenecking. The fact that FPS scales almost perfectly with resolution (as shown in the previous section) confirms that the CPU is not the limiting factor — if it were, we would see similar FPS across resolutions at the same settings.

The 9600X’s memory bandwidth of 89.6 GB/s (dual-channel DDR5) is sufficient for the B570’s PCIe 4.0 x8 interface. The GPU’s 380.0 GB/s VRAM bandwidth is independent of system memory, so the CPU’s memory support does not constrain GPU performance. The 24 PCIe Gen 5 lanes (CPU only) provide ample bandwidth for the GPU and other peripherals.

One notable point: the CPU’s integrated Radeon Graphics are present but irrelevant for this combo, as the discrete B570 handles all rendering. The CPU’s 65 W TDP and 4 nm process node contribute to efficient operation, but these factors do not directly influence Overpower’s frame rates.

FAQ

Q: What is the best resolution and settings combination for this combo in Overpower?

A: The data shows 1080p Low delivers the highest average FPS at 110. For a balance of visual quality and performance, 1440p Medium at 62 FPS (with a range of 52-71 FPS) is the most playable high-quality option. 4K is only viable at Low settings (84 FPS), as 4K Medium (52 FPS) and 4K High (49 FPS) fall below 60 FPS.

Q: Is the CPU or GPU the bottleneck in this combo for Overpower?

A: The GPU is the clear bottleneck. Evidence: FPS drops uniformly by ~10-15% per resolution step across all settings tiers, and the combo ranks 2373 out of 2980 combos while the CPU alone sits in the 81st percentile. The Ryzen 5 9600X’s 6 cores/12 threads and 5.40 GHz boost are more than sufficient for the B570’s frame rates.

Q: How does this combo compare to the Intel Arc B570’s nearest GPU rivals?

A: The B570’s aggregate benchmark score of 20556 is within 0.5% of the NVIDIA GeForce RTX 3070 Mobile (20534), Intel Arc A750 (20582), NVIDIA Quadro M4000M (20480), and AMD Radeon R9 M390X (20662). In Overpower, this translates to similar frame rates — the combo’s 1080p High average of 64 FPS would be approximately matched by any of these rivals.

Q: Can this combo handle 4K gaming in Overpower?

A: Only at Low settings, where it averages 84 FPS. At Medium settings, the average drops to 52 FPS (minimum 44), and at Ultra it falls to 40 FPS. The 10 GB GDDR6 memory and 380.0 GB/s bandwidth are insufficient for consistent 60+ FPS at 4K beyond Low settings.

Q: What is the frame time variance like at different resolutions?

A: The only reported minimum/maximum values are at Medium settings. At 1080p Medium, the range is 59-79 FPS (average 69). At 1440p Medium, 52-71 FPS (average 62). At 4K Medium, 44-60 FPS (average 52). The ~20 FPS swing at every resolution indicates consistent frame pacing with no stuttering.

Q: How does the CPU’s single-thread performance affect Overpower’s results?

A: The 9600X scores 1253 in 3dmark single-thread and 2183.5 in Cinebench R23 single-core, which places it in the 81st percentile among all CPUs. This strong single-thread capability ensures the CPU never limits the GPU in Overpower, as evidenced by the linear FPS scaling with resolution and the fact that the combo’s rank (2373 of 2980) is primarily determined by GPU performance.