Barony
This combination delivers exceptional performance with an average of 262 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 85 | 119 | 139 | 186 |
| 1440p QHD | 163 | 228 | 265 | 356 |
| 1080p Full HD | 258 | 361 | 420 | 565 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis
The AMD Ryzen 5 7400F paired with the NVIDIA GeForce RTX 5070 Ti delivers exceptional performance in Barony, a roguelike title from 2015. The measured frame rates across all resolutions and settings are remarkably high, often exceeding the refresh rates of even the fastest gaming monitors. This combination ranks in the top 10% of all tested configurations for this game, specifically at position 295 out of 2935 combos, indicating a highly optimized pairing for this title.
Resolution Scaling
The data reveals a clear and predictable pattern of performance scaling as resolution increases. At 1080p with Ultra settings, the combo produces an average of 258 FPS. Moving to 1440p Ultra, the average drops to 163 FPS, a reduction of approximately 37%. At 4K Ultra, the average further declines to 85 FPS, which is about a 67% reduction from the 1080p figure. This scaling suggests that while the GPU is powerful, the demands of 4K resolution begin to strain the rendering pipeline significantly.
The scaling pattern is consistent across all settings presets. With High settings, the frame rate drops from 361 FPS at 1080p to 228 FPS at 1440p (a 37% decrease), and then to 119 FPS at 4K (a 67% decrease from 1080p). Low settings show a similar trend, going from 565 FPS at 1080p to 356 FPS at 1440p and finally 186 FPS at 4K. The consistency of these percentage drops across presets is telling.
What does this scaling tell us about the limiting component? The fact that frame rates are still incredibly high at 4K (85 FPS on Ultra) suggests that the CPU is not a bottleneck at any of these resolutions. If the Ryzen 5 7400F were the limiting factor, we would expect to see more consistent frame rates across resolutions, as the CPU workload would remain similar regardless of pixel count. Instead, the significant drops with increasing resolution indicate that the RTX 5070 Ti is the primary performance limiter at higher resolutions.
The difference between Low and Ultra settings at each resolution further supports this. At 1080p, the jump from Low (565 FPS) to Ultra (258 FPS) represents a 54% performance penalty. At 4K, the same settings comparison shows a drop from 186 FPS to 85 FPS, also a 54% reduction. This proportional penalty across resolutions indicates that the GPU is handling the increased graphical load consistently, with the CPU providing ample headroom.
FAQ
Q: What is the performance difference between Low and Ultra settings at 1080p?
A: The average frame rate drops from 565 FPS on Low to 258 FPS on Ultra at 1920x1080, representing a 54% reduction in performance as graphical fidelity increases.
Q: How does the combo perform at 4K resolution with Medium settings?
A: At 3840x2160 with Medium settings, the average frame rate is 139 FPS, with a minimum of 118 FPS and a maximum of 159 FPS, showing a playable and smooth experience even at this demanding resolution.
Q: Is this CPU or GPU combination better suited for high-refresh-rate gaming?
A: The data shows the combo can exceed 240 FPS at 1440p with High settings (228 FPS) and at 1080p with Medium settings (420 FPS), making it well-suited for high-refresh-rate displays, particularly at 1080p and 1440p resolutions.
*Q: What is the ranking of this specific CPU and GPU pairing among all tested combos in Barony?*
A: The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5070 Ti combination ranks 295th out of 2935 total tested configurations, placing it in the top 10% of all combos for this game.
Q: Does the game show a significant performance drop when moving from 1440p to 4K?
A: Yes, at Ultra settings, the average frame rate drops from 163 FPS at 2560x1440 to 85 FPS at 3840x2160, a substantial 48% decrease, indicating that 4K resolution places a heavy load on the GPU.
Q: Are the frame rates consistent, or are there notable fluctuations?
A: For the settings where minimum and maximum values are provided (Medium presets), the variance is significant. At 1080p Medium, the range spans from 357 FPS to 483 FPS, a 126 FPS spread, suggesting some scenes are much more demanding than others.
Settings Recommendations
For players seeking the highest possible frame rates, the Low preset at 1080p offers the best performance, reaching an average of 565 FPS. This is ideal for competitive play or for users with extreme refresh rate monitors. At 1440p, Low settings still deliver a blistering 356 FPS average, which is far beyond the needs of any current display technology.
The Medium preset appears to be the sweet spot for a balance between visual quality and performance. At 1080p, it delivers 420 FPS average, and at 1440p, it maintains a 265 FPS average. Even at 4K, the Medium preset yields a highly playable 139 FPS average, with minimums above 118 FPS. This suggests that Medium settings provide a substantial visual upgrade over Low while still maintaining frame rates that are smooth on any monitor.
For those prioritizing visual fidelity, the Ultra preset is viable, but with caveats. At 1080p, Ultra runs at an average of 258 FPS, which is still excellent. At 1440p, the average drops to 163 FPS, which is great for high-refresh-rate 1440p monitors. However, at 4K, Ultra settings yield an 85 FPS average, which is playable but not ideal for gamers targeting 120 FPS or higher. The High preset offers a middle ground, with a 361 FPS average at 1080p and 228 FPS at 1440p, but at 4K it drops to 119 FPS.
The recommendation hinges on the display. For 1080p or 1440p displays, even Ultra settings are perfectly playable. For 4K displays, the Medium preset provides the best combination of visual quality and performance, as the data indicates it is the only preset that comfortably exceeds 120 FPS average at this resolution.
Measured FPS Breakdown
1920x1080 (1080p):
- Low: The average frame rate is 565 FPS, with no minimum or maximum values reported.
- Medium: The average is 420 FPS, with a minimum of 357 FPS and a maximum of 483 FPS, showing a wide variance in performance.
- High: The average frame rate is 361 FPS.
- Ultra: The average drops to 258 FPS.
2560x1440 (1440p):
- Low: The average frame rate is a very high 356 FPS.
- Medium: The average is 265 FPS, with minimum and maximum values of 225 FPS and 305 FPS respectively.
- High: The average frame rate is 228 FPS.
- Ultra: The average drops to 163 FPS.
3840x2160 (4K):
- Low: The average frame rate is 186 FPS, which is still very smooth for 4K gaming.
- Medium: The average is 139 FPS, with a minimum of 118 FPS and a maximum of 159 FPS, maintaining a consistent experience.
- High: The average frame rate is 119 FPS.
- Ultra: The average drops to 85 FPS, which is the lowest recorded figure but still playable.
The data shows a clear hierarchy, with performance decreasing as both resolution and settings increase. The 1080p Low result of 565 FPS stands out as the peak performance, while the 4K Ultra result of 85 FPS is the most demanding scenario. The Medium preset consistently provides the only recorded minimum and maximum values, suggesting that this setting exposes the most dynamic range in performance.
How This Combo Ranks
This specific combination of an AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5070 Ti achieves a rank of 295 out of 2935 tested combos in Barony. This places the pairing in the 89.9th percentile of all tested configurations, meaning it outperforms nearly 90% of all other CPU and GPU combinations tested in this game. This is a very strong showing, indicating that this hardware pairing is exceptionally well-suited for Barony.
The high rank is unsurprising given the measured frame rates. The combo consistently produces triple-digit frame rates at 1440p and even at 4K on lower settings. The only configurations that would rank higher are likely those pairing top-tier enthusiast CPUs with the most powerful GPUs available, which are not present in this data set. The Ryzen 5 7400F, despite being a more recent release, does not hold back the RTX 5070 Ti in this title.
Given that this rank is based on real, measured data, it provides a reliable indicator of relative performance. The pairing is clearly not a budget option, but rather a high-performance combination that delivers top-tier results.
CPU Role
The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 architecture. It has a base clock of 3.70 GHz and a boost clock of 4.70 GHz. This processor ranks in the 83rd percentile of all CPUs, which is a solid score. Its performance in this game suggests that Barony is not heavily CPU-bound, as the frame rates are exceptionally high and scale primarily with resolution.
The CPU's 32 MB of shared L3 cache and 6 cores are more than sufficient for a roguelike title like Barony, which typically has simpler game logic compared to large open-world games. The high boost clock of 4.70 GHz ensures that single-threaded tasks are handled quickly, which is often important for game engine logic. The data shows that even at 1080p with Low settings, the CPU is able to feed the GPU enough data to produce 565 FPS, indicating it is not a limiting factor.
The Ryzen 5 7400F's performance is comparable to its nearest rivals, such as the Intel Core i5-14600T and the AMD Ryzen AI 7 PRO 360, with a deltaPct of 0.1% and 0.3% respectively. This close grouping suggests that the CPU is not an outlier and performs as expected for its class. The fact that the combo ranks so high suggests that the CPU is providing more than enough processing power to keep up with the GPU.
GPU Role
The NVIDIA GeForce RTX 5070 Ti is the clear workhorse in this pairing. It features 16 GB of GDDR7 memory on a 256-bit bus, providing a massive 896.0 GB/s of memory bandwidth. This is a significant asset for high-resolution gaming, as it allows for rapid texture and geometry data transfer. The GPU's boost clock of 2452 MHz and its 8960 shading units contribute to its raw compute power.
The GPU's performance is in the 86th percentile of all GPUs, with an average benchmark score of 49957. It is closely matched with the AMD Radeon RX Vega 64, which has a deltaPct of -0.1%, though this comparison is against an older card. The data shows that the GPU is the main factor in performance scaling with resolution. The drop from 565 FPS at 1080p Low to 186 FPS at 4K Low is a 67% reduction, which is a direct result of the GPU having to render four times as many pixels.
The 16 GB of VRAM is more than ample for Barony, a game from 2015, meaning there are no memory capacity bottlenecks. The high memory bandwidth ensures that the GPU is never starved for data, allowing it to maintain high utilization. The GPU's role is to provide the graphical headroom that allows the combo to achieve such high frame rates, and the data confirms it does so effectively across all tested resolutions.
Hardware Specifications
AMD Ryzen 5 7400F
NVIDIA GeForce RTX 5070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5070 Ti in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 186.0 |
| 3840x2160 | Medium | 139.0 |
| 3840x2160 | High | 119.0 |
| 3840x2160 | Ultra | 85.0 |
| 2560x1440 | Low | 356.0 |
| 2560x1440 | Medium | 265.0 |
| 2560x1440 | High | 228.0 |
| 2560x1440 | Ultra | 163.0 |
| 1920x1080 | Low | 565.0 |
| 1920x1080 | Medium | 420.0 |
| 1920x1080 | High | 361.0 |
| 1920x1080 | Ultra | 258.0 |
Barony with Ryzen 5 7400F + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RTX 5070 Ti + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 5 7400F + RTX 5070 Ti
Explore FPS benchmarks for other games using this same hardware combination.