Overpower

The AMD Ryzen 5 5600F and NVIDIA GeForce RTX 4070 SUPER combination delivers a remarkably consistent gaming experience in Overpower, with the GPU acting as the primary performance driver across all tested settings. The data shows a system that comfortably exceeds 100 FPS at 4K on High settings, while the CPU’s six-core, twelve-thread configuration proves more than sufficient to keep up with the RTX 4070 SUPER’s output, even at 1080p where processor load is typically highest.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor built on the Zen 3 architecture, codenamed Vermeer, using TSMC’s 7 nm process. Its base clock of 3.00 GHz can boost up to 4.00 GHz, and it carries a 65 W TDP. The chip includes 32 MB of shared L3 cache, along with 64 KB of L1 and 512 KB of L2 cache per core, and it supports DDR4 memory in a dual-channel configuration. In synthetic benchmarks, the CPU achieves a Passmark single-thread score of 2872 and a multithread score of 19236, placing it in the 85th percentile of all CPUs tracked.

The CPU’s role in Overpower is best understood by examining the frame rate deltas when the resolution is lowered. At 1080p with Low settings, the system reaches 185 FPS on average, while at 4K with Low settings it drops to 169 FPS. This modest 16 FPS reduction suggests that the processor is not the limiting factor even at lower resolutions, as the GPU can still push high frame rates without encountering a CPU bottleneck. The 5600F’s single-thread performance, which is competitive with the Intel Core Ultra 5 225 (deltaPct 0) and only 0.2% behind the AMD Ryzen 5 5500X3D in average benchmark score, indicates that its per-core throughput is ample for handling Overpower's game logic and draw calls.

At higher settings, the CPU’s influence becomes even smaller. When moving from Low to Ultra at 1080p, the average FPS falls from 185 to 113, a 72 FPS drop that is almost entirely attributable to increased GPU workload from more complex shading and geometry. The CPU’s 12 threads provide enough headroom for background tasks and the game’s physics threads, and the data shows no evidence of stuttering or frame pacing issues that would indicate processor saturation. The 5600F’s Passmark physics score of 1043 reinforces its capability in handling the simulated interactions that Overpower’s action sequences likely rely on.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4070 SUPER is the dominant component in this pairing. It features 12 GB of GDDR6X memory on a 192-bit bus, delivering 504.2 GB/s of bandwidth. The GPU is based on the AD104 chip using Ada Lovelace architecture on a 5 nm process, with a base clock of 1980 MHz and a boost clock of 2475 MHz. It has 7168 shading units, 224 texture mapping units, and 80 raster operation processors, along with 56 ray tracing cores and 224 tensor cores. The card’s FP32 performance is rated at 35.48 TFLOPS, and it draws up to 220 W under load.

In benchmark tests, the RTX 4070 SUPER achieves a Passmark G3D score of 29995 and a Passmark GPU compute score of 17108, placing it in the 83rd percentile of all GPUs. Its average benchmark score of 43223 is within 0.1% of the NVIDIA Quadro M6000 24 GB and only 1% behind the NVIDIA GeForce RTX 4090 Mobile, showing that this desktop card is positioned near the top of the performance hierarchy. The 12 GB VRAM capacity is particularly relevant for Overpower at 4K, where texture-heavy scenes can quickly consume memory, but the measured results show no indication of VRAM-related performance cliffs.

The GPU’s role becomes clearer when examining the scaling from 1080p to 4K. At Medium settings, the average FPS drops from 147 at 1080p to 112 at 4K, a 23.8% reduction. This scaling pattern is characteristic of a GPU-bound scenario, where the CPU can feed the GPU fast enough at all resolutions, and the frame rate follows the pixel count. The RTX 4070 SUPER’s boost clock of 2475 MHz ensures that the GPU maintains high utilization even at lower resolutions, where the CPU might otherwise become a bottleneck in less capable systems.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data reveals a clear pattern of GPU-bound performance across all settings. At Low settings, the system averages 185 FPS at 1080p, 178 FPS at 1440p, and 169 FPS at 4K. The drop from 1080p to 4K is only 8.6%, which is surprisingly small and indicates that at Low settings, even the 4K resolution does not fully saturate the RTX 4070 SUPER’s capabilities. The processor is likely contributing to this ceiling, as the 5600F’s single-thread score of 2872 sets an upper bound on how many frames the CPU can process per second.

At High settings, the scaling becomes more pronounced. The system averages 137 FPS at 1080p, 122 FPS at 1440p, and 103 FPS at 4K. The 34 FPS difference between 1080p and 4K represents a 24.8% performance drop, which aligns more closely with the 4.9x increase in pixel count, suggesting that the GPU is now the primary limiter. The RTX 4070 SUPER’s texture rate of 554.4 GTexel/s and pixel rate of 198.0 GPixel/s are being pushed harder at this setting, and the data shows that the card can still deliver triple-digit frame rates at 4K High.

Ultra settings show the steepest scaling curve. At 1080p, the system averages 113 FPS, dropping to 101 FPS at 1440p and 86 FPS at 4K. The 27 FPS drop from 1080p to 4K is a 23.9% reduction, similar to the High setting’s scaling. This consistency across High and Ultra settings confirms that the GPU is the limiting component, as the CPU’s performance does not change with resolution. The RTX 4070 SUPER’s 12 GB VRAM and 504.2 GB/s bandwidth are sufficient to handle the increased memory pressure at 4K, as evidenced by the min FPS of 95 at 4K Medium, which shows no catastrophic frame drops.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the system delivers its highest average FPS across all settings. Low settings produce an average of 185 FPS, Medium settings average 147 FPS with a minimum of 125 FPS and maximum of 169 FPS, High settings average 137 FPS, and Ultra settings average 113 FPS. The spread from Low to Ultra is 72 FPS, indicating that the GPU has significant headroom at this resolution and that the Ultra preset imposes a substantial additional load on the RTX 4070 SUPER.

Moving to 2560x1440, the frame rates remain high but show a clear step down. Low settings average 178 FPS, Medium settings average 131 FPS with a minimum of 111 FPS and maximum of 151 FPS, High settings average 122 FPS, and Ultra settings average 101 FPS. The difference between Low and Ultra at 1440p is 77 FPS, which is slightly larger than the 1080p spread, suggesting that the GPU is becoming more stressed as pixel count increases.

At 3840x2160, the system still delivers playable frame rates at every preset. Low settings average 169 FPS, Medium settings average 112 FPS with a minimum of 95 FPS and maximum of 128 FPS, High settings average 103 FPS, and Ultra settings average 86 FPS. The Low to Ultra spread at 4K is 83 FPS, the largest of all resolutions, confirming that the GPU is the limiting factor when the pixel count reaches its maximum. The Medium setting’s minimum FPS of 95 at 4K is notable, as it shows that even under frame time spikes, the system stays above the 90 FPS threshold, ensuring smooth gameplay.

FAQ

*Q: Is the AMD Ryzen 5 5600F sufficient for the RTX 4070 SUPER in Overpower?*

A: Yes. The CPU’s Passmark single-thread score of 2872 and multithread score of 19236 allow it to keep pace with the GPU at all tested settings. At 1080p Low, the system reaches 185 FPS, and at 1080p Ultra it still manages 113 FPS, showing no signs of CPU limitation. The 5600F’s performance is within 0.5% of the Intel Core i9-12900T in average benchmark score, indicating that its processing power is more than adequate for this game.

*Q: How much VRAM does the RTX 4070 SUPER need for 4K gaming in Overpower?*

A: The GPU has 12 GB of GDDR6X memory, which is sufficient for all tested settings at 3840x2160. The 4K Medium preset averages 112 FPS with a minimum of 95 FPS, and 4K Ultra averages 86 FPS, with no evidence of texture swapping or frame rate crashes that would indicate VRAM exhaustion. The card’s 504.2 GB/s memory bandwidth supports these high-resolution textures effectively.

Q: What is the best setting for a 144 Hz monitor at 1440p?

A: The High preset at 2560x1440 averages 122 FPS, which is close to the 144 Hz refresh rate but does not quite hit it. The Medium preset averages 131 FPS, which is still below 144 FPS. For a full 144 Hz experience, the Low preset at 178 FPS is the only option that exceeds the refresh rate. However, the Medium preset’s minimum FPS of 111 suggests that most players will perceive smooth performance even if the average is slightly below the monitor’s maximum.

Q: How does the RTX 4070 SUPER compare to its nearest rivals in synthetic benchmarks?

A: In average benchmark score, the RTX 4070 SUPER scores 43223, which is 0.1% higher than the NVIDIA Quadro M6000 24 GB and 0.1% higher than the NVIDIA GeForce RTX 5050 Mobile. It is 1% behind the NVIDIA GeForce RTX 4090 Mobile, which scores 43667. These deltas are minimal, demonstrating that the RTX 4070 SUPER is positioned at a performance tier that is highly competitive with these other GPUs.

*Q: Does the CPU or GPU limit performance at 1080p in Overpower?*

A: The GPU is the limiting component at 1080p, based on the FPS scaling. When moving from Low to Ultra at 1920x1080, the average FPS drops from 185 to 113, a 39% reduction. This dramatic decrease is due to increased GPU workload, not CPU limitations. If the CPU were the bottleneck, the frame rate would remain flat across settings. The 5600F’s 12 threads provide sufficient headroom for the game’s processing demands.

Q: Is 4K Ultra playable with this combination?

A: Yes, but with caveats. The 4K Ultra preset averages 86 FPS, which is above the 60 FPS standard for playability but below the 100 FPS threshold that many action game players prefer. The 4K High preset averages 103 FPS, offering a better balance of visual quality and frame rate. For players who prioritize frame rate, the 4K Medium preset at 112 FPS is the recommended choice, as it provides a significant improvement over Ultra while still maintaining high visual fidelity.

Settings Recommendations

The optimal settings for this system depend on the target resolution and refresh rate. For 1080p displays, the High preset at 137 FPS offers the best balance of visual quality and performance, as the Ultra preset at 113 FPS provides only marginal visual improvements for a 17.5% reduction in frame rate. The Medium preset at 147 FPS is also viable for players who prefer higher frame rates, as it maintains a minimum of 125 FPS.

At 1440p, the High preset at 122 FPS is the recommended choice for most players. It delivers smooth, high-refresh-rate gameplay on 120 Hz monitors and provides better visual fidelity than Medium at 131 FPS. The Ultra preset at 101 FPS is acceptable for players with 100 Hz displays, but the 21 FPS drop from High to Ultra may not justify the visual gains. For competitive play, the Low preset at 178 FPS offers the highest frame rate, but the visual trade-offs are significant.

At 4K, the High preset at 103 FPS is the standout recommendation. It is the only setting that combines 4K resolution with triple-digit frame rates, making it ideal for 120 Hz 4K displays. The Medium preset at 112 FPS offers slightly higher performance but loses the visual richness of High settings. The Ultra preset at 86 FPS is only suitable for players with 60 Hz displays who prioritize maximum visual quality over frame rate. The data consistently shows that the High preset provides the best experience-to-performance ratio across all resolutions, making it the default choice for this hardware combination in Overpower.