Overpower

The AMD Ryzen 5 3600 and AMD Radeon RX 570 combination delivers a playable but firmly entry-level experience in Overpower, a 2023 Action title. The data shows the pairing ranks 1643rd out of 1744 tested combos, placing it in the bottom 6% of all configurations. Across all resolutions and settings, the average frame rates range from a low of 23.9 FPS at 4K Ultra to a high of 62.7 FPS at 1080p Low, indicating that the system is consistently constrained by the graphics card rather than the processor.

FAQ

Q: What is the best resolution and settings combo for this hardware?

A: The only configuration that achieves an average above 60 FPS is 1920x1080 with Low settings, producing 62.7 FPS. All other tested settings at 1080p fall below 40 FPS, with High at 38.7 FPS, Medium at 37.4 FPS, and Ultra at 31.2 FPS.

Q: How does the Ryzen 5 3600 compare to its closest rivals in raw CPU performance?

A: The Ryzen 5 3600 has an average benchmark score of 18129, which is virtually identical to the Intel Core i5-11400 (18150, delta -0.1%) and the AMD Ryzen 5 1600 (18158, delta -0.2%). It is slightly ahead of the AMD Ryzen 5 7535HS (18101, delta 0.2%) and the AMD EPYC 9274F (18189, delta -0.3%).

Q: What is the GPU’s memory configuration and how does it affect 4K performance?

A: The Radeon RX 570 features 4 GB of GDDR5 memory on a 256-bit bus with 224.0 GB/s bandwidth. At 3840x2160, the highest average FPS is 47.7 on Low settings, but this drops to 23.9 on Ultra, suggesting the 4 GB frame buffer is a limiting factor at higher detail levels.

Q: Is the CPU or GPU the bottleneck in this system?

A: Benchmark results indicate the GPU is the primary constraint. The CPU’s single-thread score is 696 in 3DMark, and its Cinebench R23 multi-core score is 15045, which are strong figures. However, frame rates in Overpower scale dramatically with resolution and settings, a classic sign of GPU limitation.

Q: What generation of hardware is this, and what is its production status?

A: The Ryzen 5 3600 is from the 3000 series, based on Zen 2 (Matisse) architecture on a 7 nm process, and remains in Active production status. The Radeon RX 570 is from the Polaris (RX 500) generation on a 14 nm process, and its production status is End-of-life.

Q: How does the RX 570’s average benchmark score compare to modern GPUs?

A: The RX 570 has an average benchmark score of 30158, placing it near the NVIDIA GeForce RTX 5060 (30109, delta 0.2%) and AMD Radeon RX 7700 XT (30097, delta 0.2%). It is slightly ahead of the NVIDIA Tesla M60 (29969, delta 0.6%) and the NVIDIA GeForce RTX 5070 Mobile (29928, delta 0.8%).

GPU Role

The AMD Radeon RX 570 is built on the Polaris 20 chip using GCN 4.0 architecture, fabricated on a 14 nm process at GlobalFoundries. Its clock speeds are modest for modern standards, with a base clock of 1168 MHz and a boost clock of 1244 MHz. The memory operates at 1750 MHz, translating to 7 Gbps effective, across a 256-bit bus that yields 224.0 GB/s of bandwidth. The card has 2048 shading units, 128 texture mapping units, and 32 raster operations pipelines, delivering a pixel rate of 39.81 GPixel/s and a texture rate of 159.2 GTexel/s.

The 4 GB GDDR5 frame buffer is the defining characteristic for Overpower performance. At 1080p, the difference between Low and Ultra settings is 31.5 FPS (62.7 vs 31.2), a 50% drop that correlates with increased memory pressure and fill-rate demands. The GPU’s FP32 performance of 5.095 TFLOPS is sufficient for low-detail 1080p gaming, but the data shows it struggles to maintain playable frame rates at higher presets. The card’s 150 W TDP and dual-slot design require a 450 W suggested PSU, and it connects via PCIe 3.0 x16.

The GPU’s average benchmark score of 30158 places it in the 74th percentile of all GPUs, which is surprisingly high given its age. However, this score is inflated by compute workloads like Geekbench OpenCL (32084) and Vulkan (42752), which do not translate directly to gaming performance. In Overpower, the GPU’s limitations are evident: even at 1080p Medium, the average FPS is 37.4, well below the 60 FPS threshold typically desired for Action games.

Resolution Scaling

The measured FPS data reveals a clear pattern of GPU-bound scaling across resolutions. Moving from 1080p to 1440p to 4K, the average frame rates drop consistently, but the magnitude of the drop varies by settings preset. This indicates that the RX 570’s compute and memory resources are exhausted differently depending on the workload.

At Low settings, the scaling is relatively linear: 62.7 FPS at 1080p drops to 57.3 FPS at 1440p (an 8.6% decrease) and then to 47.7 FPS at 4K (a 16.8% decrease from 1440p). This suggests that at Low, the GPU is still somewhat capable, and the CPU is able to feed it adequately. At Medium settings, the drop is steeper: 37.4 FPS at 1080p falls to 34.1 FPS at 1440p (8.8% decrease) and then to 30.9 FPS at 4K (9.4% decrease from 1440p). The smaller relative drop from 1440p to 4K at Medium compared to Low indicates that the 4 GB frame buffer is becoming a limiting factor, preventing the GPU from utilizing additional pixel throughput.

At High and Ultra settings, the scaling reveals severe degradation. At High, 1080p yields 38.7 FPS, 1440p drops to 32.4 FPS (16.3% decrease), and 4K falls to 27.3 FPS (15.7% decrease from 1440p). At Ultra, the numbers are 31.2 FPS at 1080p, 28 FPS at 1440p (10.3% decrease), and 23.9 FPS at 4K (14.6% decrease from 1440p). The Ultra preset at 4K produces the lowest score in the entire dataset, 23.9 FPS, which is unplayable for a fast-paced Action title. The resolution scaling data strongly suggests that the limiting component is the GPU, as the CPU’s performance remains constant regardless of resolution.

Measured FPS Breakdown

The complete measured FPS dataset for Overpower shows a system that is only viable at the lowest settings. At 1920x1080, the configuration achieves its best result with Low settings at 62.7 FPS average. This is the only setting where the frame rate exceeds 60 FPS. High settings at 1080p produce 38.7 FPS, while Medium produces 37.4 FPS, and Ultra produces 31.2 FPS. The gap between Low and Medium is substantial at 25.3 FPS, indicating that the Medium preset introduces significant GPU workload.

At 2560x1440, the performance drops across all presets. Low settings yield 57.3 FPS, which is still above 50 FPS but below the 60 FPS target. High settings produce 32.4 FPS, Medium produces 34.1 FPS, and Ultra produces 28 FPS. Interestingly, Medium outperforms High at 1440p by 1.7 FPS, which may indicate that the High preset has specific effects that are more taxing on the GPU’s memory subsystem. The Ultra preset at 1440p is 29.3 FPS below the Low preset, highlighting the cost of maxing out detail settings.

At 3840x2160, the system is largely unplayable. Low settings produce 47.7 FPS, which is playable but not smooth. Medium settings drop to 30.9 FPS, High to 27.3 FPS, and Ultra to 23.9 FPS. The difference between Low and Ultra at 4K is 23.8 FPS, a 50% reduction in performance. The data shows that the RX 570 with 4 GB of VRAM cannot handle 4K resolution with any detail settings above Low, and even Low is marginal. Across all resolutions, the average FPS at Ultra settings never exceeds 31.2 FPS, confirming that this combo is best suited for 1080p Low or possibly 1440p Low if the user can tolerate sub-60 FPS.

How This Combo Ranks

The combination of the AMD Ryzen 5 3600 and AMD Radeon RX 570 ranks 1643rd out of 1744 tested combos in Overpower. This places it in the bottom 5.8% of all configurations, which is consistent with the hardware’s age and tier. The CPU itself is not the issue; the Ryzen 5 3600 has an average benchmark score of 18129, which is in the 76th percentile of all CPUs. Its nearest rivals include the Intel Core i5-11400 (delta -0.1%) and the AMD Ryzen 5 7535HS (delta 0.2%), showing that the processor is competitive with much newer parts.

The GPU, however, drags the combo down. The RX 570’s average benchmark score of 30158 is in the 74th percentile of all GPUs, but its nearest rivals are modern cards like the NVIDIA GeForce RTX 5060 (delta 0.2%) and AMD Radeon RX 7700 XT (delta 0.2%). This suggests that the RX 570’s raw compute scores are misleading for gaming; in Overpower, its 4 GB VRAM and older GCN architecture are severe disadvantages. The combo rank of 1643 out of 1744 indicates that the vast majority of tested systems outperform this pairing.

The data implies that the Ryzen 5 3600 is capable of driving much faster GPUs, as its multi-threaded performance (Cinebench R23 multi-core score of 15045) is strong. The bottleneck is unequivocally the RX 570. For users with this combo, the measured FPS data suggests that upgrading the GPU would yield significant gains in Overpower, while keeping the CPU would not limit performance until much higher frame rates are achieved. The rank of 1643 out of 1744 is a stark indicator that this system is at the bottom tier for this game, suitable only for low-detail 1080p play.