Outriders

# Outriders Performance Analysis: Intel Core i7-14700F + NVIDIA GeForce RTX 5060

The benchmark data for Outriders with the Intel Core i7-14700F and NVIDIA GeForce RTX 5060 reveals a system that delivers playable frame rates across most settings but shows clear scaling patterns that point to the GPU as the primary performance governor at higher resolutions. With measured average FPS ranging from 261 at 1080p Low to just 34 at 4K Ultra, the dataset illustrates a wide performance envelope that depends heavily on both resolution and quality preset. The combination ranks 1452 out of 3710 tested combos in this game, placing it in the upper-middle portion of the field, which suggests a balanced pairing rather than an extreme one.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic and reveals where the bottleneck shifts. At 1080p High, the system produces 143 average FPS, while at 4K High it falls to 47 average FPS — a reduction of roughly 67% when moving from 1080p to 4K. This steep decline indicates that the GPU is heavily taxed at higher resolutions, as the RTX 5060's 8 GB GDDR7 memory and 128-bit bus width must handle significantly more pixel data at 3840x2160.

Looking at the Low preset scaling tells a similar story: 261 FPS at 1080p drops to 165 FPS at 1440p, then to 86 FPS at 4K. The 1080p-to-1440p transition costs about 37% of the frame rate, while the 1440p-to-4K transition costs another 48%. This non-linear degradation is typical of a GPU-limited scenario where memory bandwidth and rasterization throughput become increasingly constrained as pixel count grows.

The Medium preset provides the most complete data with min and max FPS values. At 1080p Medium, the average is 190 FPS with a minimum of 162 and maximum of 219. At 1440p Medium, the average drops to 120 FPS with a range of 102 to 138. At 4K Medium, the average falls to 63 FPS with a minimum of 53 and maximum of 72. The consistency of the frame pacing, as evidenced by the relatively tight min-max ranges, suggests the system maintains stable performance without major stuttering events.

Ultra settings show the most severe scaling. The 1080p Ultra average of 103 FPS is still smooth, but 1440p Ultra drops to 65 FPS, and 4K Ultra falls to 34 FPS — barely playable for most gamers. The gap between High and Ultra at 4K (47 vs 34 FPS) indicates that Ultra preset introduces rendering features that disproportionately impact the RTX 5060 at high pixel counts.

The data implies that at 1080p, the CPU has enough headroom to feed the GPU, but at 4K the GPU becomes the limiting factor. The Core i7-14700F with its 20 cores and 28 threads appears to keep pace even at high frame rates, as evidenced by the 261 FPS result at 1080p Low, which is a demanding scenario for CPU-bound bottlenecks. The scaling pattern suggests that users targeting 4K should expect to compromise on settings, while 1080p and 1440p provide much more flexibility.

GPU Role

The NVIDIA GeForce RTX 5060 features 8 GB of GDDR7 memory on a 128-bit bus, delivering 448.0 GB/s of bandwidth. This memory configuration is a critical factor in the 4K results, where the frame buffer demands are highest. The boost clock of 2497 MHz and base clock of 2280 MHz provide the compute throughput needed for the 3840 shading units, 120 TMUs, and 48 ROPs.

The GPU's 30 RT cores and 120 tensor cores support the Blackwell 2.0 architecture features, but in Outriders, a looter shooter with fast-paced action, the data shows that raw rasterization performance matters more. The PassMark G3D score of 20891 and 3DMark Steel Nomad DX12 score of 3628 place the RTX 5060 in the 72nd percentile among all GPUs, with nearest rivals including the AMD Radeon 860M (deltaPct -0.3) and AMD Radeon RX 6750 XT (deltaPct 1.2).

The 4K Ultra result of 34 FPS suggests that the 8 GB VRAM buffer may be approaching its capacity limit at that resolution and quality level. When the frame buffer exceeds available VRAM, performance typically degrades sharply, and the 47% drop from 4K High (47 FPS) to 4K Ultra (34 FPS) is consistent with memory pressure. The 1440p results show more headroom, with Ultra hitting 65 FPS, indicating that at this resolution the VRAM and bandwidth are adequate.

The GPU's FP32 throughput of 19.18 TFLOPS and pixel rate of 119.9 GPixel/s provide context for the measured results. At 1080p, the 261 FPS Low result demonstrates that the GPU can deliver high frame rates when pixel load is modest. The texture rate of 299.6 GTexel/s helps explain why Medium settings at 1440p (120 FPS) remain fluid, as texture sampling demands are well within the GPU's capabilities.

The RTX 5060's transistor count of 21,900 million on a 5 nm TSMC process node indicates a modern, efficient design, but the 145 W TDP and 300 W suggested PSU requirement show it is not a power-hungry part. The data suggests that for Outriders, the GPU is the dominant performance factor at resolutions above 1080p, with the 8 GB VRAM acting as a potential constraint at 4K Ultra.

FAQ

Q: Can this system run Outriders at 4K smoothly?

A: At 4K High, the average FPS is 47, which is playable but not smooth by high-refresh standards. For a more consistent experience, 4K Medium averages 63 FPS with a minimum of 53 FPS, which provides better frame pacing. 4K Ultra drops to 34 FPS, which is likely too low for comfortable gameplay.

Q: What is the best resolution for high refresh rate monitors?

A: At 1080p, the system delivers 143 FPS on High and 190 FPS on Medium, both suitable for 144Hz or higher displays. At 1440p, High averages 90 FPS and Medium averages 120 FPS, making 1440p viable for 120Hz monitors with Medium settings.

Q: How does the Ultra preset compare to High in terms of performance cost?

A: The Ultra preset costs roughly 28% of the frame rate compared to High at 1080p (103 vs 143 FPS), 28% at 1440p (65 vs 90 FPS), and 28% at 4K (34 vs 47 FPS). The consistent percentage drop suggests Ultra adds similar rendering complexity regardless of resolution.

Q: Is the 8 GB VRAM sufficient for Outriders?

A: The data shows playable performance at 1080p and 1440p across all settings, including Ultra (103 FPS at 1080p, 65 FPS at 1440p). At 4K Ultra, the 34 FPS result may indicate VRAM pressure, but 4K High and Medium remain functional, suggesting 8 GB is adequate for this game at most settings.

Q: How does the RTX 5060 compare to its nearest rivals in synthetic benchmarks?

A: The GPU's average benchmark score of 26331 places it 0.3% behind the AMD Radeon 860M and 0.3% behind the NVIDIA GeForce MX550, while being 1.2% ahead of the AMD Radeon RX 6750 XT. These small deltas indicate the RTX 5060 sits in a competitive performance tier.

Q: What frame rates can be expected at 1440p with Medium settings?

A: The measured data shows an average of 120 FPS at 1440p Medium, with a minimum of 102 FPS and maximum of 138 FPS. This represents a good balance of visual quality and performance for most gaming scenarios.

Measured FPS Breakdown

At 3840x2160, the RTX 5060 and Core i7-14700F combination produces 34 FPS on Ultra, 47 FPS on High, 63 FPS on Medium, and 86 FPS on Low. The Medium preset shows a minimum of 53 FPS and maximum of 72 FPS, indicating stable frame delivery despite the high resolution. The jump from Low to Medium costs 23 FPS, while High to Ultra costs 13 FPS, showing that the preset scaling is not linear.

At 2560x1440, the performance improves substantially. Ultra averages 65 FPS, High averages 90 FPS, Medium averages 120 FPS, and Low averages 165 FPS. The Medium preset again provides min-max data: 102 FPS minimum and 138 FPS maximum. The gap between Low and Medium is 45 FPS, and between High and Ultra is 25 FPS, suggesting that Ultra adds significant visual features that impact performance.

At 1920x1080, the system reaches its highest frame rates. Ultra averages 103 FPS, High averages 143 FPS, Medium averages 190 FPS, and Low averages 261 FPS. The Medium preset shows a minimum of 162 FPS and maximum of 219 FPS, demonstrating excellent frame consistency. The 1080p Low result of 261 FPS indicates the CPU can push very high frame rates when GPU load is low.

The progression from 1080p to 1440p to 4K shows a consistent halving of frame rates at each step for most settings. For example, High goes from 143 to 90 to 47 FPS, while Medium goes from 190 to 120 to 63 FPS. This pattern reinforces the GPU-bound nature of the system at higher resolutions, where pixel count doubles at each step and frame rate correspondingly drops.

CPU Role

The Intel Core i7-14700F provides 20 cores and 28 threads from its Raptor Lake architecture, with a base clock of 2.10 GHz and boost clock of 5.40 GHz. This CPU configuration is clearly not the limiting factor in most of the measured scenarios, as evidenced by the 261 FPS result at 1080p Low, which pushes frame rates high enough to stress CPU capabilities.

The CPU's benchmark scores support its strong performance positioning. The Cinebench R23 multicore score of 35122 and single-core score of 4958 indicate robust processing power, while the Geekbench multicore score of 19620 and single-core score of 2429 confirm this. The PassMark multithread score of 41317 places the CPU in the 91st percentile among all CPUs, with nearest rivals including the AMD Ryzen 9 7900X (deltaPct 0.6) and AMD EPYC 7313P (deltaPct 0.8).

In Outriders, which is a looter shooter with moderate CPU demands, the 20-core processor provides ample headroom. The 33 MB shared L3 cache and 2 MB per-core L2 cache help maintain data locality for game logic and physics. The CPU's memory support for both DDR4 and DDR5 allows flexibility, though the measured results do not specify which memory type was used.

The fact that frame rates scale so heavily with resolution and settings suggests the CPU is not the bottleneck. If the CPU were limiting performance, we would expect to see similar frame rates across different resolutions at the same settings. Instead, the data shows frame rates dropping by roughly half at each resolution step, which is a classic sign of GPU limitation.

The single-thread performance, measured at 4958 in Cinebench R23 and 2429 in Geekbench, is sufficient for game logic and draw call processing. The PassMark single-thread score of 4257 further confirms this capability. The CPU's 65 W TDP indicates efficient operation, and its 10 nm process node from Intel suggests modern manufacturing.

Settings Recommendations

Based on the measured data, the optimal settings depend on the target resolution and desired frame rate. For 1080p gaming, the High preset at 143 FPS offers an excellent balance, providing strong visual quality with frame rates suitable for high refresh rate monitors. The Ultra preset at 103 FPS is also viable, but the 28% performance cost over High may not justify the visual improvements for most players.

For 1440p, the High preset at 90 FPS is a solid choice for 60Hz to 90Hz displays, while the Medium preset at 120 FPS is better suited for 120Hz monitors. The Ultra preset at 65 FPS is playable but may feel less smooth, especially in fast-paced combat scenarios common in looter shooters. The Medium preset's min-max range of 102-138 FPS indicates consistent frame delivery, making it the recommended choice for competitive play.

For 4K, the Medium preset at 63 FPS with a minimum of 53 FPS provides the best experience, as it maintains frame rates above 60 FPS on average while keeping minimums playable. The High preset at 47 FPS is borderline, and the Ultra preset at 34 FPS is not recommended. The Low preset at 86 FPS is an option for players prioritizing frame rate over visual fidelity, though the visual compromise may be significant.

Across all resolutions, the Medium preset consistently delivers the most balanced experience when considering both average FPS and minimum FPS data. The measured min-max ranges for Medium settings show the tightest frame pacing, indicating fewer stutters and more predictable performance. For the best experience per the measured rows, Medium settings at 1440p or 1080p provide the most headroom for smooth gameplay.

How This Combo Ranks

The Intel Core i7-14700F and NVIDIA GeForce RTX 5060 combination ranks 1452 out of 3710 tested combos in Outriders, placing it in the 39th percentile of tested systems. This ranking indicates a mid-to-upper-tier performance level, with the CPU's strong benchmark standing (91st percentile) balanced by the GPU's more modest position (72nd percentile).

The CPU's nearest rivals include the Intel Xeon 6505P (deltaPct -0.2), Intel Xeon Phi 7290 (deltaPct 0.3), AMD Ryzen 9 7900X (deltaPct 0.6), and AMD EPYC 7313P (deltaPct 0.8). These small deltas show that the Core i7-14700F is competitive with high-end server and desktop processors in synthetic benchmarks, though the gaming performance depends on the GPU pairing.

The GPU's nearest rivals show a tighter grouping: AMD Radeon 860M (deltaPct -0.3), NVIDIA GeForce MX550 (deltaPct -0.3), AMD Radeon RX 5700 XT 50th Anniversary (deltaPct -0.8), and AMD Radeon RX 6750 XT (deltaPct 1.2). The RTX 5060 sits slightly above the RX 6750 XT in average benchmark score, which is notable given the generational differences.

The rank of 1452 out of 3710 suggests that while this combo is not at the top of the performance hierarchy, it delivers respectable results in Outriders. The measured frame rates support this interpretation: the system can handle 1080p at high frame rates, 1440p at good frame rates, and 4K at playable frame rates with appropriate settings. The combination's ranking reflects a balanced setup where the CPU provides ample headroom and the GPU delivers solid performance, though enthusiasts seeking maximum frame rates at 4K Ultra would need a more powerful graphics solution.