Outriders

The AMD Ryzen 7 7700 and NVIDIA GeForce RTX 4080 pairing produces a wide spread of frame rates in Outriders, ranging from a highly playable 78 FPS at 4K High to a fluid 250 FPS at 1080p Low. The benchmark data reveals a system that is overwhelmingly GPU-bound at higher resolutions and settings, with the CPU only becoming a relevant factor at the lowest presets and resolutions. This analysis breaks down the measured performance, offering practical advice for tuning the game to your display’s capabilities.

Resolution Scaling

The FPS drop from 1080p to 4K is steep but consistent with a game that scales its rendering load heavily on the GPU. At High settings, the average frame rate falls from 200 FPS at 1920x1080 to 149 FPS at 2560x1440, a 25.5% reduction. Moving up to 3840x2160, the average drops to 78 FPS, which is a 61% reduction from the 1080p figure and a 47.7% reduction from the 1440p figure. This scaling pattern shows that the RTX 4080 is the primary limiting component, as the increasing pixel count directly translates to fewer frames.

The pattern holds for other settings. With Medium settings, the average FPS at 1080p is 222, which drops to 191 at 1440p and 104 at 4K. The 4K Medium result represents a 53.2% drop from 1080p Medium. The most extreme scaling appears at Low settings, where the 1080p average of 250 FPS falls to 215 at 1440p and then to 143 at 4K. The 4K Low score is 42.8% lower than the 1080p Low score, indicating that even at the lowest graphical load, the GPU is still the bottleneck at 4K.

Interestingly, the Ultra preset shows the smallest relative drop from 1080p to 4K. At 1080p Ultra, the average is 170 FPS; at 1440p, it is 108 FPS (a 36.5% drop); and at 4K, it is 56 FPS (a 67.1% drop from 1080p). This suggests that the Ultra preset introduces effects that are computationally expensive at all resolutions, but the pixel-count penalty at 4K remains the dominant factor. The data clearly shows that for 4K gaming, the RTX 4080’s raw throughput is the deciding factor, and the Ryzen 7 7700 is not holding it back.

GPU Role

The NVIDIA GeForce RTX 4080 is the star of this configuration, and its specifications explain the measured performance. It features 16 GB of GDDR6X memory on a 256-bit bus, providing a memory bandwidth of 716.8 GB/s. This large frame buffer is likely a key reason why the game performs as well as it does at 4K, where high-resolution textures and effects consume significant video memory. The card’s boost clock of 2505 MHz, built on the Ada Lovelace architecture, allows it to maintain high throughput across all settings.

The RTX 4080’s benchmark results place it in the 86th percentile of all GPUs, with an average benchmark score of 54247. Its nearest rival is the NVIDIA GeForce RTX 4080 SUPER, which scores a nearly identical 54209, a delta of just 0.1%. This indicates that the non-SUPER variant is essentially on par with its successor in synthetic tests. The data shows the GPU is a top-tier part, and its performance in Outriders reflects that, with the 4K Medium preset hitting an average of 104 FPS.

The card’s compute capabilities are substantial, with a FP32 performance of 48.74 TFLOPS. While the game’s engine may not fully utilize all of this raw power, it ensures that there is ample headroom for the demanding effects present in the game. The RTX 4080’s role is clear: it is the component that determines the playability ceiling. The measured FPS at 4K High (78 FPS) and 4K Medium (104 FPS) are both excellent, proving that the GPU can handle the game at the highest resolutions without breaking a sweat. The 16 GB VRAM capacity is a strong asset for future-proofing, as it provides a comfortable buffer for the game’s memory usage.

FAQ

*Q: Can this system run Outriders at 4K with a smooth 60+ FPS experience?*

A: Yes. The measured data shows an average of 78 FPS at 4K High settings and 104 FPS at 4K Medium settings. Both figures are well above the 60 FPS threshold, indicating that the RTX 4080 and Ryzen 7 7700 combination provides a highly playable 4K experience.

Q: What is the best setting for competitive play at 1080p?

A: For the highest possible frame rates, the Low preset at 1920x1080 yields an average of 250 FPS. If you prefer a balance of visual quality and speed, the High preset still delivers a very high average of 200 FPS, which is more than sufficient for fast-paced action.

Q: How does the RTX 4080 compare to its direct successor in this GPU class?

A: The data shows the RTX 4080 has an average benchmark score of 54247, while the RTX 4080 SUPER scores 54209. This represents a delta of 0.1%, meaning the two cards are virtually identical in synthetic performance, and the RTX 4080 is not significantly slower.

Q: Is the CPU or GPU the main bottleneck at 1440p High settings?

A: The performance scaling from 1080p to 1440p suggests the GPU is the limiting factor. The average FPS drops from 200 to 149 when moving to 1440p, a 25.5% decrease. This indicates that the increased resolution demands more from the RTX 4080, while the Ryzen 7 7700 has sufficient headroom to keep up.

Q: Are the measured FPS figures reliable for real-world gameplay?

A: Yes, the data is marked as `dataIsMeasured: true`. This indicates the scores are based on actual benchmark runs, not estimates. The Medium settings also include min and max FPS values, which show a narrow range (e.g., 189-256 FPS at 1080p), suggesting stable performance.

Q: What is the performance gap between High and Ultra settings at 1440p?

A: At 2560x1440, the High preset averages 149 FPS, while the Ultra preset averages 108 FPS. This is a 27.5% performance cost for the Ultra preset, which is a significant drop that may not be visually worth it for all players.

Settings Recommendations

The measured FPS data provides a clear picture of the performance trade-offs for each preset. For a 4K display, the Medium preset is the sweet spot. It delivers an average of 104 FPS, which is a substantial improvement over the 78 FPS of High, and it includes measurable min and max values (88 and 119 FPS) that confirm stable frame pacing. The Ultra preset at 4K drops to 56 FPS, which is playable but not ideal for a smooth experience, while Low at 4K is unnecessary as Medium is already so fast.

For 1440p users, the High preset is the best choice. It provides an average of 149 FPS, which is far above the 60 FPS needed for smooth gameplay and close to the 144 Hz refresh rate that many monitors offer. The Low preset at 1440p hits 215 FPS, but the visual downgrade is likely too severe for the extra frames. The Ultra preset at 1440p (108 FPS) is a viable option for those who prioritize image quality and still want a high frame rate, but High offers better performance with a modest visual compromise.

At 1080p, the High preset (200 FPS) is recommended for most users, as it offers excellent visual fidelity with frame rates high enough for any display. The Low preset (250 FPS) is only beneficial for esports-level competitive play where every frame counts. The Medium preset (222 FPS) is a good middle ground if you want to maximize FPS without going to the lowest settings. The Ultra preset at 1080p (170 FPS) is playable but is the least efficient choice, as it sacrifices 30 FPS compared to High for what is often a subtle visual difference.

Measured FPS Breakdown

At 1920x1080, the game runs exceptionally well on this hardware. The Low preset averages 250 FPS, the Medium preset averages 222 FPS with a range of 189 to 256 FPS, and the High preset averages 200 FPS. Even the Ultra preset, the most demanding, averages a strong 170 FPS. This resolution is clearly CPU-limited at the lower settings, as the FPS is very high, but the Ryzen 7 7700’s 8-core, 16-thread design handles the game’s logic without issue.

Moving to 2560x1440, the frame rates remain high but begin to show the GPU’s load. The Low preset averages 215 FPS, a 14% drop from 1080p. The Medium preset averages 191 FPS (162 to 219 FPS range), and the High preset averages 149 FPS. The Ultra preset drops to 108 FPS, which is a 36.5% reduction from the 1080p Ultra score. These numbers show that the RTX 4080 is still in its comfort zone at 1440p, with all presets except Ultra easily clearing 144 FPS.

At 3840x2160, the GPU is definitively the bottleneck. The Low preset averages 143 FPS, which is still excellent for 4K. The Medium preset averages 104 FPS with a range of 88 to 119 FPS, providing a smooth experience. The High preset averages 78 FPS, which is playable but requires a VRR display for optimal smoothness. The Ultra preset averages 56 FPS, which is the only setting that dips below the 60 FPS threshold, making it the least desirable option for 4K gaming. The data shows a clear hierarchy: Medium is the best balance of quality and performance at 4K.

CPU Role

The AMD Ryzen 7 7700 plays a supporting role in this configuration. With 8 cores and 16 threads, it has a base clock of 3.80 GHz and a boost clock of 5.30 GHz. Its Cinebench R23 multicore score of 18760 and single-core score of 1930 indicate strong all-around performance. The CPU’s benchmark results place it in the 87th percentile of all CPUs, with an average benchmark score of 40081. Its nearest rival, the AMD Ryzen AI 9 365, scores 40048, a delta of just 0.1%, showing that the 7700 is right in the middle of the pack for modern desktop processors.

In Outriders, the CPU’s role is to feed the GPU with data. The measured FPS at 1080p Low (250 FPS) and 1080p Medium (222 FPS) are extremely high, but they are not artificially capped by the CPU. The fact that the FPS scales down consistently as resolution increases proves that the CPU is not the limiting factor in this game. Even at 1080p Ultra, where the GPU is working harder, the CPU still delivers 170 FPS, which is far beyond what most displays can show.

The Ryzen 7 7700’s architecture, based on Zen 4 and built on a 5 nm process, provides the efficiency needed to maintain high clock speeds without excessive power draw. Its 32 MB of shared L3 cache is beneficial for gaming, allowing for faster data access. The data suggests that the CPU is more than capable of handling the game’s physics and AI calculations, leaving the RTX 4080 to focus on rendering. For this pairing, the CPU is a strong partner that does not hold back the GPU in any measurable way.