Outriders

The AMD Ryzen 5 7400F and Intel Arc B580 combination delivers a highly scalable performance profile in Outriders, with average frame rates ranging from 26 FPS at 4K Ultra to 200 FPS at 1080p Low. The measured data positions this pairing as a mid-pack contender, ranking 2145th out of 2913 tested combos in this game, placing it in the 26th percentile of all tested systems. This configuration demonstrates a clear performance ceiling at higher resolutions while offering exceptional headroom at lower settings, making it a versatile option for players who prioritize frame rate over visual fidelity.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings, revealing a system that becomes progressively GPU-bound as pixel count increases. At High settings, the average frame rate falls from 109 FPS at 1920x1080 to 69 FPS at 2560x1440, then to 36 FPS at 3840x2160. This represents a 37% reduction from 1080p to 1440p and a further 48% reduction from 1440p to 4K, with the total scaling from 1080p to 4K showing a 67% performance loss. The pattern is even more pronounced at Ultra settings, where the drop from 79 FPS at 1080p to 50 FPS at 1440p and finally 26 FPS at 4K shows a 67% cumulative reduction.

The scaling behavior at Low settings follows a similar trajectory but with higher absolute values: 200 FPS at 1080p drops to 126 FPS at 1440p (37% loss) and then to 66 FPS at 4K (48% loss from 1440p). This consistent proportional scaling across all quality presets indicates that the limiting component shifts decisively toward the GPU as resolution increases. At 1080p, the extremely high frame rates at Low settings suggest that the CPU is capable of feeding the GPU well beyond typical display refresh rates, while the 4K results show the Arc B580 reaching its computational limits.

Medium settings provide the most complete data with min and max FPS values, showing a range of 124-167 FPS at 1080p, 78-105 FPS at 1440p, and 41-55 FPS at 4K. This narrowing of the frame time distribution at higher resolutions confirms that the GPU is the primary bottleneck in 4K scenarios, as variance decreases when the system operates closer to the hardware's maximum capacity. The data suggests that 1440p represents the sweet spot for this combination, where the GPU still delivers playable frame rates at high quality settings without the severe degradation seen at 4K Ultra.

GPU Role

The Intel Arc B580, based on the Xe2-HPG architecture and built on TSMC's 5 nm process, provides the graphical muscle for this configuration. Its 12 GB of GDDR6 memory on a 192-bit bus delivers 456.0 GB/s of bandwidth, which proves adequate for Outriders' texture-heavy environments at 1440p but becomes a limiting factor at 4K Ultra settings. The GPU's 2560 shading units, 160 texture mapping units, and 80 render output units are complemented by 20 ray tracing cores, though the game's implementation of these features appears to exact a heavy toll at higher resolutions.

The clock behavior is notable for its uniformity: both base and boost clocks sit at 2670 MHz, with memory running at 2375 MHz (19 Gbps effective). This fixed clock strategy means the GPU's performance scaling relies entirely on memory bandwidth and shader throughput rather than dynamic boost headroom. The 13.67 TFLOPS of FP32 compute and 427.2 GTexel/s texture rate explain why the card performs disproportionately worse at 4K, where the pixel fill rate of 213.6 GPixel/s becomes the constraining factor.

Comparing the Arc B580 to its nearest rivals in the database, it sits within a tight performance band: 0.6% faster than the NVIDIA GeForce RTX 2080, 0.7% slower than the RTX 3080, and 1% slower than the NVIDIA P106-100. This places the B580's raw compute capability in the same league as older high-end cards, but the measured Outriders results show that the game's optimization for this architecture may not fully utilize its theoretical throughput. The GPU's 68th percentile ranking among all GPUs in the database underscores that it is a solid mid-range performer rather than a high-end solution, which aligns with the observed 4K frame rates.

FAQ

Q: What is the best resolution for this combo in Outriders?

A: The data shows 2560x1440 at High settings produces 69 FPS average, which is the most balanced configuration. At 1080p, High settings yield 109 FPS, while 4K High drops to 36 FPS, making 1440p the optimal resolution for maintaining playable frame rates with high visual quality.

Q: How does the Arc B580 compare to the RTX 2080 in this game?

A: The Arc B580's average benchmark score is 0.6% higher than the RTX 2080, indicating near-identical raw performance. However, the measured Outriders data shows the B580 struggling at 4K Ultra (26 FPS), suggesting the game may favor NVIDIA's architecture for higher-end settings.

Q: Is the Ryzen 5 7400F sufficient for high frame rates?

A: Yes. The 1080p Low result of 200 FPS demonstrates that the 6-core, 12-thread processor with a 4.70 GHz boost clock is not a bottleneck at lower resolutions. The CPU's 83rd percentile ranking among all processors and its single-thread score of 3689 in PassMark support its capability to feed the GPU effectively.

Q: What settings should I use for 4K gaming?

A: At 3840x2160, Low settings produce 66 FPS average, while Medium drops to 48 FPS and High to 36 FPS. Ultra is not recommended at 4K, as it falls to 26 FPS. Players seeking smooth 4K gameplay should use Low or Medium settings depending on their frame rate targets.

Q: How does the combo rank relative to all tested systems?

A: This combination ranks 2145th out of 2913 total combos tested for Outriders, placing it in the 26th percentile. This means roughly three-quarters of all tested systems deliver higher performance in this game, though the ranking reflects a broad range of hardware configurations.

Q: What is the frame time consistency like at different settings?

A: Medium settings provide the only min/max data across all resolutions. The 1080p result shows a range of 124-167 FPS (43 FPS spread), 1440p shows 78-105 FPS (27 FPS spread), and 4K shows 41-55 FPS (14 FPS spread). Higher resolutions exhibit tighter frame time distribution, indicating more stable but lower performance.

How This Combo Ranks

The combination of the AMD Ryzen 5 7400F and Intel Arc B580 achieves a rank of 2145 out of 2913 tested combos for Outriders, placing it in the 26th percentile of all systems. This rank reflects the GPU's mid-range positioning, as the Arc B580 sits at the 68th percentile among GPUs, while the CPU ranks at the 83rd percentile among processors. The discrepancy between CPU and GPU percentiles suggests that the graphics card is the limiting factor in this pairing, preventing the system from achieving higher overall rankings.

When examining the measured frame rates against the combo's rank, the data reveals that the system performs better at lower resolutions relative to its peers. At 1080p Low, the 200 FPS result is competitive with systems ranked much higher, while at 4K Ultra, the 26 FPS result is more typical of lower-ranked configurations. This resolution-dependent performance profile is characteristic of a GPU-bound system where the B580's compute capabilities are sufficient for pixel-dense workloads but fall short of high-end cards in terms of raw throughput.

The nearest CPU rivals provide context for the processor's contribution: the Intel Core i5-14600T scores 0.1% higher, the Intel Core Ultra 7 155H scores 0.2% higher, and the AMD Ryzen 7 PRO 6850H scores 0.2% lower. These marginal differences indicate that the CPU choice has minimal impact on the overall combo ranking, as the GPU's performance dominates the results. Similarly, the GPU rivals show the B580 within 1% of the RTX 2080, RTX 3080, and RX 580 2048SP, meaning that this combo's rank is representative of a broad swath of mid-range to upper-mid-range graphics solutions.

CPU Role

The AMD Ryzen 5 7400F, a 6-core, 12-thread processor from the 7000 series, provides the computational foundation for this system. Based on the Zen 4 (Raphael) architecture and manufactured on TSMC's 5 nm process, this CPU features a base clock of 3.70 GHz and a boost clock of 4.70 GHz. Its 32 MB of shared L3 cache, complemented by 64 KB L1 and 1 MB L2 per core, ensures adequate data locality for game logic and physics calculations. The processor's 65 W TDP makes it an efficient choice that does not require exotic cooling solutions.

Benchmark results for the 7400F show strong multi-threaded performance: Cinebench R23 scores of 21765 multi-core and 3072 single-core, while PassMark multithread reaches 25645 and single-thread hits 3689. These scores place the CPU in the 83rd percentile of all processors, with an average benchmark score of 32750. The nearest rival, the Intel Core i5-14600T, scores 32707 (0.1% higher), while the AMD Ryzen 7 PRO 6850H scores 32812 (0.2% higher), indicating the 7400F is precisely in the expected performance band for its class.

In the context of Outriders, the CPU's role is most evident at 1080p Low settings, where the system achieves 200 FPS. This result demonstrates that the 7400F can sustain high frame rates without bottlenecking the GPU, as the Arc B580 is capable of rendering frames faster than the processor can issue draw calls at higher resolutions. The 12 threads handle the game's enemy AI and loot calculations effectively, and the 4.70 GHz boost clock ensures responsive single-threaded performance for game logic that cannot be parallelized. The CPU's DDR5 memory support with 83.2 GB/s bandwidth also contributes to reducing stutter in open-world sections.

Measured FPS Breakdown

The measured data provides a complete matrix of performance across four settings presets and three resolutions. At 1920x1080, the system delivers 200 FPS at Low, 145 FPS at Medium (with a range of 124-167 FPS), 109 FPS at High, and 79 FPS at Ultra. These results indicate that 1080p gaming is exceptionally smooth across all quality levels, with even Ultra settings maintaining frame rates well above 60 FPS. The 121 FPS difference between Low and Ultra at this resolution highlights the significant impact of graphical settings on performance.

Moving to 2560x1440, the performance scales down proportionally: 126 FPS at Low, 92 FPS at Medium (78-105 FPS range), 69 FPS at High, and 50 FPS at Ultra. The drop from 1080p to 1440p is most pronounced at Low settings (200 to 126 FPS, a 37% reduction) and least severe at Ultra (79 to 50 FPS, a 37% reduction), showing consistent scaling across the settings spectrum. At 1440p, High settings remain playable at 69 FPS, while Ultra dips below the 60 FPS threshold, making it marginal for competitive play.

At 3840x2160, the performance becomes more constrained: 66 FPS at Low, 48 FPS at Medium (41-55 FPS range), 36 FPS at High, and 26 FPS at Ultra. The 4K results show that only Low settings achieve playable frame rates, while Medium and High fall below 60 FPS and Ultra is virtually unplayable. The progression from Low to Ultra at 4K shows a 40 FPS drop (66 to 26), which is a 61% reduction in performance due to settings alone. The min FPS at 4K Medium of 41 FPS indicates that even the lowest frame rates in this configuration remain above 30 FPS, avoiding severe stutter.

Settings Recommendations

For players targeting 60 FPS as a minimum threshold, the data suggests specific settings combinations for each resolution. At 1920x1080, all settings presets exceed 60 FPS, with even Ultra maintaining 79 FPS average. This makes 1080p Ultra the recommended configuration for players who prioritize visual quality without sacrificing smoothness, as the 79 FPS result leaves ample headroom above the playability threshold. Players with 144 Hz or higher refresh rate displays can opt for High settings at 109 FPS or Medium at 145 FPS for a more responsive experience.

At 2560x1440, the recommended preset is High, which delivers 69 FPS average and remains comfortably above 60 FPS. Medium settings at 92 FPS provide additional headroom for high refresh rate monitors, while Ultra at 50 FPS falls below the ideal threshold. For players who prefer maximum visual fidelity at 1440p, High settings represent the best balance, as the 19 FPS difference between High and Ultra is not justified by the marginal visual improvement in a looter shooter where fast-paced action benefits from higher frame rates.

At 3840x2160, Low settings are the only preset that maintains playable performance, with 66 FPS average. Medium settings drop to 48 FPS, which is still playable for slower-paced moments but may feel sluggish during intense combat encounters. High and Ultra at 36 and 26 FPS respectively are not recommended for 4K gaming, as the frame rates fall below the threshold for responsive gameplay. Players with 4K displays should consider scaling down to 1440p for a significantly better experience, as the 1440p High result of 69 FPS is identical to the 4K Low result but with substantially better visual quality.